7 Second Procharged C6 Z06 for sale!!!!
12-16-2014, 02:30 PM
#1
Le Mans Master
Thread Starter
7 Second Procharged C6 Z06 for sale!!!!
I am listing my car for sale. Started out as a 2007 Z06 with 6800 miles.
Car has a 25.3 cage done by Ron Rhodes @ Rhodes custom auto. Car is certed to go 6.50 at 3600lbs. Good for another year. (13k)
Engine consists of an
LSX block (427 cu in) (around 25k)
Callies Dragonslayer crank
Oliver billet rods
11:1 JE pistons
Manton Pushrods
Jesel lifter bushings and 937 keyway lifters
60mm billet cam, 268/276 116 LSA .480/.465 Lobe lift
1.8 Jesel rockers
1/2 inch head studs
Heads are All Pro 12-1 With the lightened program, Titanium intake valves and exh valves. Every option you can get. Heads were over 7k alone.
Holley intake manifold
120lb injectors
All pro valve covers
A@A 10 rib bracket with innovators west balancer (2k)
F1C-91 with a 4.5 Riechard racing pulley (4k)
Chiseled Performance PT3000 Intercooler and ice tank (2500)
ARH 2- 2 1/8 headers with a 4 inch collector (2k)
Drivetrain is an RPM Transmissions Powerglide and 9 inch setup with DSS Axles, Neil Chance bolt together converter. (close to 20k alone)
Weld Alumistar front wheel with RTS Rears with a champion bead lock.
Holley dominator system (4k)
Spaghetti Menders Wiring system(2500)
Plenty of other stuff that isnt listed probably equal to 8-10k also
Thats over 85k in parts not including the car or the labor to build it. Clear title in hand. Asking 120k
Car has been a best of 8.20@167 and a 5.270@133.33 in the 1/8 with a 1.24 60 all in the same pass. There is still PLENTY more in it. Car should be able to go 7.8 on this same setup once dialed in more. Car weighed 3280 with driver(250) This is with less than 8 passes on the car.
Its setup to run Ultra/real street
We can assist with the car to the new buyer for the entire next season if they wish to race it competitively.
Here is a ton of pictures of the build of the car
http://s121.photobucket.com/user/Fra...?sort=3&page=1
Here is a ton more of when the chassis was getting built.
http://s121.photobucket.com/user/Fra...?sort=3&page=1
Email Fran@raceprovenmotorsports.net or call 610-209-0903
Car has a 25.3 cage done by Ron Rhodes @ Rhodes custom auto. Car is certed to go 6.50 at 3600lbs. Good for another year. (13k)
Engine consists of an
LSX block (427 cu in) (around 25k)
Callies Dragonslayer crank
Oliver billet rods
11:1 JE pistons
Manton Pushrods
Jesel lifter bushings and 937 keyway lifters
60mm billet cam, 268/276 116 LSA .480/.465 Lobe lift
1.8 Jesel rockers
1/2 inch head studs
Heads are All Pro 12-1 With the lightened program, Titanium intake valves and exh valves. Every option you can get. Heads were over 7k alone.
Holley intake manifold
120lb injectors
All pro valve covers
A@A 10 rib bracket with innovators west balancer (2k)
F1C-91 with a 4.5 Riechard racing pulley (4k)
Chiseled Performance PT3000 Intercooler and ice tank (2500)
ARH 2- 2 1/8 headers with a 4 inch collector (2k)
Drivetrain is an RPM Transmissions Powerglide and 9 inch setup with DSS Axles, Neil Chance bolt together converter. (close to 20k alone)
Weld Alumistar front wheel with RTS Rears with a champion bead lock.
Holley dominator system (4k)
Spaghetti Menders Wiring system(2500)
Plenty of other stuff that isnt listed probably equal to 8-10k also
Thats over 85k in parts not including the car or the labor to build it. Clear title in hand. Asking 120k
Car has been a best of 8.20@167 and a 5.270@133.33 in the 1/8 with a 1.24 60 all in the same pass. There is still PLENTY more in it. Car should be able to go 7.8 on this same setup once dialed in more. Car weighed 3280 with driver(250) This is with less than 8 passes on the car.
Its setup to run Ultra/real street
We can assist with the car to the new buyer for the entire next season if they wish to race it competitively.
Here is a ton of pictures of the build of the car
http://s121.photobucket.com/user/Fra...?sort=3&page=1
Here is a ton more of when the chassis was getting built.
http://s121.photobucket.com/user/Fra...?sort=3&page=1
Email Fran@raceprovenmotorsports.net or call 610-209-0903
Last edited by Frans96ss; 12-17-2014 at 11:11 AM.
12-16-2014, 06:07 PM
#4
Le Mans Master
Thread Starter
12-17-2014, 01:13 AM
#6
Team Owner
Member Since: Apr 2001
Location: Elmhurst, IL (West Suburb of Chicago) & Home of MEGA Horsepower
Posts: 26,714
Received 584 Likes
on
399 Posts
St. Jude Donor '06
Fran KILLER car!
Friendly advice, too difficult to find the asking price would help with sale if its clearly listed in the first line or two.
GLWS!
Friendly advice, too difficult to find the asking price would help with sale if its clearly listed in the first line or two.
GLWS!
12-18-2014, 02:09 PM
#7
Le Mans Master
Thread Starter