FS 2007 ZO6, Katech, Brembo, Moton
#1
Advanced
Thread Starter
FS 2007 ZO6, Katech, Brembo, Moton
For Sale is my 2007 ZO6 Corvette. Velocity Yellow with a Katech Street Attack engine. 17,000 miles. It's a dominate track car but is very docile on the street. I didn't like the bucking on the Katech cam so had CC grind a special cam with less duration split and more lobe center angle. I also had Texas Speed CNC port the heads and change the exhaust valves to Manley SS. I added a Rollmaster double timing set and T&D roller rockers along with new lifters and custom length pushrods and ARP head bolts. Now it's docile on the street but still ran 180 at the Texas Mile before and after. 26+ highway mpg. $45,500
Katech Velocity Yellow intake and valve cover package
Brembo Monoblock Crossdrilled 14" brake package with special 72 vain severe duty front rotors
Hawk HPS pads for the street
Pagid endurance front track pads
Moton coilover Sport ZO6 suspension w/ Hypercoil springs and remote reservoirs
PFADT Competition Sway Bars
Ron Davis radiator
Shark Bar (to mount 6 point seat belts)
Simpson harness
Carbon fiber splitter
LGM G2 Spinal duct brake cooling hose
Billy Boat SS Fusion quad round mufflers and tips
Kooks 1 7/8 SS headers and X pipe
Wheels powder coated gloss black
11 Quart Lingenfelter dry sump tank
Caravaggio steering wheel
Halltech ram air filter
Amsoil 20w-50 synthetic oil and Amsoil synthetic trans fluid
Nitto INVO tires
Stored in a heated and cooled garage
$45,500
Oh, I've only put about 12 laps on it at Texas World Speedway, about 10 laps at Harris Hill, and about 30 at the short track at Austin Driveway school.
Katech Velocity Yellow intake and valve cover package
Brembo Monoblock Crossdrilled 14" brake package with special 72 vain severe duty front rotors
Hawk HPS pads for the street
Pagid endurance front track pads
Moton coilover Sport ZO6 suspension w/ Hypercoil springs and remote reservoirs
PFADT Competition Sway Bars
Ron Davis radiator
Shark Bar (to mount 6 point seat belts)
Simpson harness
Carbon fiber splitter
LGM G2 Spinal duct brake cooling hose
Billy Boat SS Fusion quad round mufflers and tips
Kooks 1 7/8 SS headers and X pipe
Wheels powder coated gloss black
11 Quart Lingenfelter dry sump tank
Caravaggio steering wheel
Halltech ram air filter
Amsoil 20w-50 synthetic oil and Amsoil synthetic trans fluid
Nitto INVO tires
Stored in a heated and cooled garage
$45,500
Oh, I've only put about 12 laps on it at Texas World Speedway, about 10 laps at Harris Hill, and about 30 at the short track at Austin Driveway school.
Last edited by biodds; 08-06-2015 at 07:34 PM.
#2
Advanced
Thread Starter
Price reduced. It would take about $35K plus the cost of a stocker to duplicate this car and that's if you do all the work. This car should outrun the new ZO6 for half the price.
#8
Advanced
Thread Starter
Price is $46,995. I'm in Texas and have no idea about California laws. It has Kooks SS headers and cats. All pollution stuff is still on the car as far as I know.
Thanks
Thanks
#16
Advanced
Thread Starter
Doesn't anyone have enough ***** to buy this car. The new ones overheat at the track after 10 minutes if they don't blow up. This is bulletproof and half the price! And it's lighter and probably faster.
#18
Advanced
Thread Starter
543 WHP. Brembos on all four corners. Stock clutch which is fine on the track but doesn't like to be drag raced. I have a Lingenfelter ZR1 clutch setup in a box for $1000 extra if you want it.
#20
I have a 2013 Raptor loaded, White with Black graphics and 29k miles, title in hand. Ill swap if your interested. Located in North Texas. Truck is worth your asking price. Contact me at uxojerry@hotmail.com