Notices
C6 Corvettes for Sale Private Classifieds, Used C6 Corvettes For Sale, and Modified or Stock Corvettes

2007 Z06 heavily modified for sale $58,000.00

Thread Tools
 
Search this Thread
 
Old 04-30-2015, 09:21 PM
  #1  
pscherrer215
Cruising
Thread Starter
 
pscherrer215's Avatar
 
Member Since: Feb 2011
Location: Fort Lauderdale Florida
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default 2007 Z06 heavily modified for sale $58,000.00

For sale finally!!! : BEST OFFER ONLY or I keep it
NEW ERL 454ci Short Block is going in
If you would like to modify engine to your specs, I will accept deposit before the motor is built .

Body mods:
20 inch SM7 Strasse Forged Carbon Fiber wheels 20X10 front 20X13 rear = $7500.00-8000.00 even for Used
Carbon Fiber front spoiler= 700.00 + clear coated
Carbon Fiber Halltech Rear Spoiler = 1000.00 + clear coated (more aggressive than the ZR1 its taller
Matte Blue Metallic Body Wrap

Brakes:
Calipers Powder coated Blue
AFX Performance Slotted Rotors $1600.00 (Brand new maybe 500 miles)
Hawk Performance Pads (300.00-400.00 Brand new maybe 500 miles)

Performance:
PRC 265cc Heads with titanium 2.200-inch intake and stainless 1.610-inch exhaust valves
At .650-inches of lift it gets 388-cfm and .700 lift it gets 393-cfm
ARP head studs
Manley 3/8″ Pushrods
PRC Dual Valve Springs
DHM low profile cut outs (closed at the moment because its even louder- intolerable)
PHADT Engine and Trans Mounts
oil cooler
trans cooler
Halltech Super Beeline Carbon fiber intake- (best intake on the market) (1400.00 maybe 700 miles)
FAST 102 Manifold
102 nick Williams ported throttle body
Stainless Works 2" headers
Catless Xpipe
Billy bullet race exhaust (1700.00 under 500 miles)
Top of the line oil catch can with breather (300.00 under 300 miles)
Katech valve covers and billet fuel rails ($1000.00 setup)
LS9 ZR1 injectors
Electric Waterpump (160 thermostat)
MGW shifter

Nitrous Express 102mm plate System which to my knowledge has been used twice for GM High performance magazine- I haven't used it .
(3000.00 like new)

A one of a kind custom made Nitrous Outlet Standalone fuel cell for N20 (C16 VP Fuel) tank that can be used if you drag race the car. It shuts off the regular gas lines with a push of a button from the center console and only uses the gas inside the custom tank. (priceless however it hasn't seen a drag strip since I bought the car) - I have been to PBIR to road course once and since I bought it as a guest I was instructed to take it easy.

Powertrain/Trans:
Modified T56, Promotion Powertrain
LPE Hardened Output Shafts in Rear Differential
Monster 3 ceramic clutch
Attached Images       
Old 04-30-2015, 10:02 PM
  #2  
Y2KRoadster
Melting Slicks
 
Y2KRoadster's Avatar
 
Member Since: Nov 2003
Location: In front!
Posts: 2,122
Received 72 Likes on 37 Posts

Default

You have to post an asking price bud. Forum rules. Mods are pretty quick about locking threads down that don't have it listed. Just giving you a heads up.
Old 04-30-2015, 10:36 PM
  #3  
phillie356
Advanced
 
phillie356's Avatar
 
Member Since: Jun 2008
Posts: 75
Likes: 0
Received 1 Like on 1 Post
Default

Price, mileage and color under the wrap?
Old 05-01-2015, 12:09 AM
  #4  
pscherrer215
Cruising
Thread Starter
 
pscherrer215's Avatar
 
Member Since: Feb 2011
Location: Fort Lauderdale Florida
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

okay guys here you go. 96,000 original miles, under 5000 miles on all updated parts, black is original color, and price will be at 58K with new motor.
Old 05-01-2015, 11:26 AM
  #5  
pscherrer215
Cruising
Thread Starter
 
pscherrer215's Avatar
 
Member Since: Feb 2011
Location: Fort Lauderdale Florida
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Jason913
Nice car. But there's no way you're going to get the kind of returns on after market parts you are looking for with the vette crowd. Would be a lot more profitable and easier to sell if you part it out.

Just my opinion
Look guys, I do not need to sell the car nor do I really want to which is why I didn't originally post a selling price. I'm not opposed to offers but don't insult me like "dartkilla". However, if someone out there wants to do the same things to their car that I have done to mine then it would be quite worth it for them to buy mine instead of doing it from scratch themselves. I will not part out the car because I want to drive it until it sells. I don't even have the 454ci from ERL in it yet!!!! LOLZZZZ come on!! If i just wanted to get rid of it, I wouldn't be investing another $11,000 in engine parts. As it is, the car makes N/A 623 RWHP and when I get it back from ERL it will have approx. 700 N/A rwhp. Thats without Nitrous and that nitrous has never been used by me (its been just for show ever since I bought it from Lashway motorsports)

There are also videos of the car on you tube..."Matte blue lashway Z06" I have invested another 10-15K in parts alone after I bought it from Lashway with another 11k about to be spent on it. This car is known, its not just another Z06. I have perfected this car and the only reason I have entertained the idea of selling it is because I have an investment opportunity in the stock market. Overall, that sounds to me like about 20k in parts alone I put in, not including the 30K at least that the shop invested into it. There is not one part on this car besides interior and some exterior pieces that are stock. Not even the calipers (upgraded internally)

This is the best put together naturally aspirated Z06 that you will ever find. "opinion" but I have heard that many times from others.
Old 05-01-2015, 11:30 AM
  #6  
pscherrer215
Cruising
Thread Starter
 
pscherrer215's Avatar
 
Member Since: Feb 2011
Location: Fort Lauderdale Florida
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default













Old 05-01-2015, 11:43 AM
  #7  
racerx3317
Drifting
 
racerx3317's Avatar
 
Member Since: Apr 2006
Location: New York New York
Posts: 1,526
Received 207 Likes on 161 Posts

Default

Is it hard to wrap the door sills? What did you use? Good luck with sale..
Old 05-01-2015, 12:07 PM
  #8  
pscherrer215
Cruising
Thread Starter
 
pscherrer215's Avatar
 
Member Since: Feb 2011
Location: Fort Lauderdale Florida
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by racerx3317
Is it hard to wrap the door sills? What did you use? Good luck with sale..
Yes it is really hard to do that.. I did not do it, superior automotive in pompano did it.

Thank you
Old 05-01-2015, 03:31 PM
  #9  
hawkgfr
Race Director
 
hawkgfr's Avatar
 
Member Since: Apr 2008
Location: South Carolina
Posts: 19,164
Received 1,210 Likes on 822 Posts

Default

Originally Posted by dartkilla
Opinions are like a$$holes, everyone has one. Your entitled to yours, and maybe you will be the one to dish out full asking price, and park it in front of your beautiful trailer you live in!
OP nice car good luck with sale and free bump..

Last edited by johnodrake; 05-02-2015 at 07:31 AM.
Old 05-01-2015, 04:54 PM
  #10  
dbirdhouse1
Safety Car
 
dbirdhouse1's Avatar
 
Member Since: Jul 2004
Location: Bonney Lake Washington
Posts: 4,958
Received 875 Likes on 587 Posts

Default As should be the case......

......if you respond as one who is not interested in buying the car and you have an opinion that you believe might benefit a fellow Vette owner then e-mail him privately, otherwise it usually appears as if you're trying to show the world how clever you are at someone's (literal) expense
Old 05-02-2015, 07:37 AM
  #11  
johnodrake
Moderator

Support Corvetteforum!
 
johnodrake's Avatar
 
Member Since: Dec 2002
Location: Lakewood Ranch, FL
Posts: 40,058
Received 3,570 Likes on 1,615 Posts

Default For Sale Rule and Violations

For the benefit of those who have not read or choose not to abide by the Forum's For Sale section rules, here they are again:

8. Interference in a For Sale thread

http://forums.corvetteforum.com/show....php?t=1118176

If you don’t like the price or item being offered in for sale thread, take it to e-mail or PMs. Better still, just move on to a thread that is offering something you like the price on.

If you post a criticism of the price or the quality of the item being offered, you will be in violation of Forum rules and subject to sanctions.

If you post your own for sale items to the for sale thread started by someone else, you also are in violation of Forum rules. Start your own thread, rather than jumping into the thread of someone else.

If your contribution to a for sale thread does not advance the sale, you are in the way.

If you spot inappropriate posts to a for sale thread, please alert a moderator.


Further violations will result in sanctions for the violator.

johnodrake
Moderator
Old 05-03-2015, 05:19 PM
  #12  
bigblock66vette
Racer
 
bigblock66vette's Avatar
 
Member Since: Nov 2000
Location: Louisville Kentucky
Posts: 454
Likes: 0
Received 7 Likes on 6 Posts

Default

Very nice car and it would take a ton more to duplicate this car than your asking. This is not a car for 90% of the corvette owners out there that just bought one due to their mid life crisis or kids that can just now afford a real car.. Its for those 10% of us that use the car for what its built for. Do not listen to these kids and old timers on here that just want to put your car down. Its a very nice car and I would own this if it wasn't 20K out of my range. Good luck with the sale and just give it a little time. The right buyer will come along that understands exactly what this car is and was built to do. Your price is right now.

Will
Old 05-03-2015, 05:28 PM
  #13  
CallawayC
Racer
 
CallawayC's Avatar
 
Member Since: Feb 2010
Posts: 416
Received 42 Likes on 31 Posts

Default

Beautiful Z
Old 05-03-2015, 09:04 PM
  #14  
pscherrer215
Cruising
Thread Starter
 
pscherrer215's Avatar
 
Member Since: Feb 2011
Location: Fort Lauderdale Florida
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks guys.

Get notified of new replies

To 2007 Z06 heavily modified for sale $58,000.00




Quick Reply: 2007 Z06 heavily modified for sale $58,000.00



All times are GMT -4. The time now is 03:47 AM.