2006 Corvette convertible
06-12-2015, 11:40 AM
#1
Instructor
Thread Starter
Member Since: Jul 2006
Location: Blue Mountain Mississippi
Posts: 213
Likes: 0
Received 2 Likes
on
2 Posts
2006 Corvette convertible
2006 Corvette convertible, 20k miles, 3LT, auto, paddle shifters, HUD, navigation, Bose, keyless, several mods: custom comp cam, Yank 3600 converter, headers and off road pipe, varaam cold air, Fast intake, custom tune, weld RTS wheels w/ drag radials. Ran 11.50 at 121 on an easy pass at Memphis. Very nice with no accidents or paintwork. 28.5k obo. 662-882-1520. Call or text.
Last edited by mach2004; 07-07-2015 at 11:03 AM.
06-17-2015, 03:05 PM
#2
Instructor
Thread Starter
Member Since: Jul 2006
Location: Blue Mountain Mississippi
Posts: 213
Likes: 0
Received 2 Likes
on
2 Posts
All pm's replied. To answer a couple repeat questions. The car has only been down the track 5 times. 3 Eighth mile and 2 quarter mile passes. It ran 11.50 @ 121 MPH quarter and 7.40 @95 MPH eighth with only a 1.70 sixty foot. The car should go faster by leaving harder. I was 100 miles from home with no trailor or help and was not willing to risk breaking.
The paint on the car is near perfect along with the interior. The car drives like a stock car on the highway and still gets 30 MPG. Any more questions call or text 662-882-1520.
The paint on the car is near perfect along with the interior. The car drives like a stock car on the highway and still gets 30 MPG. Any more questions call or text 662-882-1520.
06-22-2015, 12:36 PM
#3
Instructor
Thread Starter
Member Since: Jul 2006
Location: Blue Mountain Mississippi
Posts: 213
Likes: 0
Received 2 Likes
on
2 Posts
Price reduced to 29K.
To answer a couple more questions. All the work was done by a professional. One of the engineers from Competition Cams did the design on the custom cam. He also did the install and the tune.
The car is not a racecar and could be driven anywhere. No disappointments!!!
To answer a couple more questions. All the work was done by a professional. One of the engineers from Competition Cams did the design on the custom cam. He also did the install and the tune.
The car is not a racecar and could be driven anywhere. No disappointments!!!
06-22-2015, 03:58 PM
#5
Instructor
Thread Starter
Member Since: Jul 2006
Location: Blue Mountain Mississippi
Posts: 213
Likes: 0
Received 2 Likes
on
2 Posts
I am located in North Miss. Just north of Tupelo. I do not have the original wheels. These wheels and tires were just over $3000. You could easily sell these and replace the originals or trade and put $1500 to $1800 back in your pocket. The Weld RTS wheels are in high demand and have a 6 month turnover period so there is always someone looking for a set.