7 second true street c6Z build starts now!
08-03-2015, 02:56 PM
#283
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
Ah man, finish it!!
08-03-2015, 03:19 PM
#284
Le Mans Master
08-04-2015, 11:54 AM
#285
Melting Slicks
Thread Starter
if you are interested in the engine package, chassis/car or both or everything all-in pm me for a build cost sheet to respond with an offer.
08-05-2015, 04:10 PM
#286
Melting Slicks
Thread Starter
here are most of my pics
https://picasaweb.google.com/1144453.../TrueStreetZ06
here is cost sheet with links back to receipts
https://docs.google.com/spreadsheets...it?usp=sharing
let me know if i can help further
https://picasaweb.google.com/1144453.../TrueStreetZ06
here is cost sheet with links back to receipts
https://docs.google.com/spreadsheets...it?usp=sharing
let me know if i can help further
08-14-2015, 04:22 PM
#288
Melting Slicks
Thread Starter
I would have to start with selling the entire car/title and associated parts and then follow with getting rid of the engine/powertrain before looking to let loose any remaining components.
the build is still on and moving forward unless someone buys it out from under me.
the build is still on and moving forward unless someone buys it out from under me.
08-14-2015, 06:24 PM
#289
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
08-16-2015, 01:44 PM
#291
Melting Slicks
Thread Starter
08-17-2015, 01:55 PM
#293
Melting Slicks
Thread Starter
first time it came back to me i could tell by eyeball something was not right
after that was fixed at @3k my expense it came back again and i could tell by tape measure that it was still not right (3/4" off oem dimension) also the doors wouldn't shut.
first thing i did before they even started was give a full list of repair measurements (they said they already have all that stuff) was it looked at i dunno, but the chassis was never corrected to stock dimension.
after that was fixed at @3k my expense it came back again and i could tell by tape measure that it was still not right (3/4" off oem dimension) also the doors wouldn't shut.
first thing i did before they even started was give a full list of repair measurements (they said they already have all that stuff) was it looked at i dunno, but the chassis was never corrected to stock dimension.
08-17-2015, 01:59 PM
#294
first time it came back to me i could tell by eyeball something was not right
after that was fixed at @3k my expense it came back again and i could tell by tape measure that it was still not right (3/4" off oem dimension) also the doors wouldn't shut.
first thing i did before they even started was give a full list of repair measurements (they said they already have all that stuff) was it looked at i dunno, but the chassis was never corrected to stock dimension.
after that was fixed at @3k my expense it came back again and i could tell by tape measure that it was still not right (3/4" off oem dimension) also the doors wouldn't shut.
first thing i did before they even started was give a full list of repair measurements (they said they already have all that stuff) was it looked at i dunno, but the chassis was never corrected to stock dimension.
Damn what a cluster ****...
Hope it all works out.
11-11-2015, 10:35 AM
#295
Melting Slicks
Thread Starter
I had these custom made for me and bought few sets while they were being cut
these are special to match the alumastar2 shape exactly (also fit the magnum or v-series) and they do not require a separate set of lugs or studs in between OR the need to put longer studs on your car
all you need is your car + the weld wheels and special set of lug nuts
if anyone is interested please pm me. I only need 1 set for my car which i heard may be getting some activity this week at midwest chassis!
these are special to match the alumastar2 shape exactly (also fit the magnum or v-series) and they do not require a separate set of lugs or studs in between OR the need to put longer studs on your car
all you need is your car + the weld wheels and special set of lug nuts
if anyone is interested please pm me. I only need 1 set for my car
which i heard may be getting some activity this week at midwest chassis!
12-29-2015, 05:58 PM
#297
Melting Slicks
Thread Starter
the car roller was sold. the engine, drivetrain, and electronics are all available for purchase at a large discount
https://docs.google.com/spreadsheets...it?usp=sharing
thanks to those who followed and supported I am going to have to mod a c7z now instead 
https://docs.google.com/spreadsheets...it?usp=sharing
thanks to those who followed and supported
I am going to have to mod a c7z now instead
