*Sale* ECS SC1500 Supercharger Kits For All Applications Shipped Or Installed!
02-02-2013, 09:07 AM
#1
Drifting
Thread Starter
Member Since: Nov 2012
Location: Bradenton Florida
Posts: 1,665
Likes: 0
Received 16 Likes
on
10 Posts
St. Jude Donor '13
*Sale* ECS SC1500 Supercharger Kits For All Applications Shipped Or Installed!
I am holding a nice sale on ALL East Coast Supercharging kits. Having personally worked for ECS and been involved in some of the product testing and development (Including while at ECS us pioneering my personal Fifth Gen Camaro into the 9's on a stock bottom end at full weight!), so I can field all questions regarding the kits and have excellent knowledge of the installation & tuning aspects of the kit.
Here is a brief description of the ECS kit:
"When you install a SC System on your C5/C6, you dramatically increase the load on the vehicles belt system. That’s why we start our C5/C6 system by addressing one of the most critical aspects of a centrifugal supercharging system – not addressed by other SC manufacturers. We start by including a super strong, custom belt tensioner designed, specifically, to handle the increased belt load. We go further by providing zinc coated steel, double walled ball bearing idlers to replace the factory plastic idlers that are expected to handle the belt load in lesser systems."
Systems include injectors, fuel pump voltage booster ("BAP"), but will REQUIRE custom tuning upon installation.
You can PM me for the excellent pricing on their kit for over-the-counter sales and I can give you a coupon code for ordering direct on our website.
For installation we are running the following deal:
- ECS Complete Novi 1500 Supercharger Kit
- Professional Installation of ECS Kit
- Custom Dyno Tuning on our new Mustang MD-150 load control dyno
$6395 turn-key installed on ANY ECS application!!!
For Shipped pricing please PM Me.
From street car....
To race car... The ECS kit has you covered!
Here is a brief description of the ECS kit:
"When you install a SC System on your C5/C6, you dramatically increase the load on the vehicles belt system. That’s why we start our C5/C6 system by addressing one of the most critical aspects of a centrifugal supercharging system – not addressed by other SC manufacturers. We start by including a super strong, custom belt tensioner designed, specifically, to handle the increased belt load. We go further by providing zinc coated steel, double walled ball bearing idlers to replace the factory plastic idlers that are expected to handle the belt load in lesser systems."
Systems include injectors, fuel pump voltage booster ("BAP"), but will REQUIRE custom tuning upon installation.
You can PM me for the excellent pricing on their kit for over-the-counter sales and I can give you a coupon code for ordering direct on our website.
For installation we are running the following deal:
- ECS Complete Novi 1500 Supercharger Kit
- Professional Installation of ECS Kit
- Custom Dyno Tuning on our new Mustang MD-150 load control dyno
$6395 turn-key installed on ANY ECS application!!!
For Shipped pricing please PM Me.
From street car....
To race car... The ECS kit has you covered!
Last edited by Matt @ FSP; 03-01-2014 at 07:11 PM.
100%...........
04-17-2013, 04:01 PM
#10
Drifting
Thread Starter
Member Since: Nov 2012
Location: Bradenton Florida
Posts: 1,665
Likes: 0
Received 16 Likes
on
10 Posts
St. Jude Donor '13
Thanks guys... We hit 548rwhp on the dyno at 5900rpms, got shut down due to it being 10PM and the neighbor's tattled on us to the police! So I finished it up on the street. We'll have the final numbers late this month when we go back up to Panama, and meth kit will be on this go-around to handle this FL heat better! We'll look for 600 all day long safe, 12* timing.
04-17-2013, 06:37 PM
#14
Melting Slicks
04-18-2013, 10:02 AM
#15
Premium Supporting Vendor
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,313
Received 1,084 Likes
on
656 Posts
04-18-2013, 11:06 AM
#16
Melting Slicks
