C6 Forced Induction/Nitrous C6 Corvette Turbochargers, Superchargers, Pulley Upgrades, Intercoolers, Wet and Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

Forced Induction Cars at Runway Rivalry

Thread Tools
 
Search this Thread
 
Old 04-19-2015, 10:52 PM
  #1  
sr71bb
Racer
Thread Starter
 
sr71bb's Avatar
 
Member Since: Dec 2005
Location: DFW texas
Posts: 256
Received 51 Likes on 32 Posts

Default Forced Induction Cars at Runway Rivalry

On May 2-3, Runway Rivalry will take place and there will be as many as NINE cars that Advanced Modern Performance did some work on including of course my own. www.dallasracing.net sponsors the event and they within the next few days will post more details on the individual cars on their FACEBOOK page.

http://www.dallasracing.net/forums/s...fficial-Roster

This will show you the roster of cars. My car is entry 14 on the list and is an F1R powered 2010 SS Black Camaro with over 1000 RWHP. Corvettes represented from AMP will be entry number 15 a ZR1, entry 18 a Z06, and entry 41 Vic's GrandSport (defending champion). Car entry 39 is a CTS V, Car entry 99 a fourth gen SS Camaro. There should be a couple others as well. ALL of these cars make over a 1000 HP and most are PROCHARGED.

Breakout speed for this 1500 foot roll race is 165 MPH. SEVERAL of these cars will be pushing that.
Old 04-20-2015, 05:28 AM
  #2  
winters97gt
Le Mans Master
 
winters97gt's Avatar
 
Member Since: Dec 2007
Location: Somewhere in the Mid 9's TX
Posts: 8,290
Received 77 Likes on 65 Posts

Default

Sounds like a good time. TI, quick 30 track rentals, and other events have kept being rescheduled. This weather isn't cooperating this year very well. Even the Texas Mile guys had a headwind.
Old 04-20-2015, 08:45 AM
  #3  
dsp300c
Melting Slicks
 
dsp300c's Avatar
 
Member Since: Nov 2006
Location: Dallas Tx
Posts: 2,865
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by sr71bb
On May 2-3, Runway Rivalry will take place and there will be as many as NINE cars that Advanced Modern Performance did some work on including of course my own. www.dallasracing.net sponsors the event and they within the next few days will post more details on the individual cars on their FACEBOOK page.

http://www.dallasracing.net/forums/s...fficial-Roster

This will show you the roster of cars. My car is entry 14 on the list and is an F1R powered 2010 SS Black Camaro with over 1000 RWHP. Corvettes represented from AMP will be entry number 15 a ZR1, entry 18 a Z06, and entry 41 Vic's GrandSport (defending champion). Car entry 39 is a CTS V, Car entry 99 a fourth gen SS Camaro. There should be a couple others as well. ALL of these cars make over a 1000 HP and most are PROCHARGED.

Breakout speed for this 1500 foot roll race is 165 MPH. SEVERAL of these cars will be pushing that.

how do you know for sure it's 165? breakout speed is supposed to be given to everyone Saturday morning before we actually start racing.

here is what it says from the site
"Below is the official schedule for Runway Rivalry II. Please take notes of the times for all the events.
Indexing for the class races will happen every time you run down the airfield, so make sure to run your car before lunch Saturday, to end up in the proper class. We will have break out speeds for each class, to discourage sand bagging within the classes. Breakout speeds for the classes will be released before the class races start."
Old 04-20-2015, 09:29 AM
  #4  
White_Lightning
Melting Slicks
 
White_Lightning's Avatar
 
Member Since: Oct 2000
Location: dfw Texas
Posts: 3,368
Received 30 Likes on 26 Posts

Default

AMP really has a strong showing @ RR this year. Cant wait to see them do some work!
Old 04-20-2015, 09:51 AM
  #5  
sr71bb
Racer
Thread Starter
 
sr71bb's Avatar
 
Member Since: Dec 2005
Location: DFW texas
Posts: 256
Received 51 Likes on 32 Posts

Default Class Determinations

That 165MPH breakout is pretty firm for Class A cars give or take MAYBE 1 MPH. The breakouts for the other classes are to be determined because they are going to have to have all the cars indexed according to their speeds. Whatever it takes to make the groups work number wise is what is going to determine the breakouts for Class B and Class C. It makes no sense for example to have 50 cars in Class B and only say 20 Cars in Class C. Obviously I don't run this event so things could change, but this is my understanding of it from those that do.


Originally Posted by dsp300c
how do you know for sure it's 165? breakout speed is supposed to be given to everyone Saturday morning before we actually start racing.

here is what it says from the site
"Below is the official schedule for Runway Rivalry II. Please take notes of the times for all the events.
Indexing for the class races will happen every time you run down the airfield, so make sure to run your car before lunch Saturday, to end up in the proper class. We will have break out speeds for each class, to discourage sand bagging within the classes. Breakout speeds for the classes will be released before the class races start."
Old 04-20-2015, 09:56 AM
  #6  
White_Lightning
Melting Slicks
 
White_Lightning's Avatar
 
Member Since: Oct 2000
Location: dfw Texas
Posts: 3,368
Received 30 Likes on 26 Posts

Default

Originally Posted by sr71bb
That 165MPH breakout is pretty firm for Class A cars give or take MAYBE 1 MPH. The breakouts for the other classes are to be determined because they are going to have to have all the cars indexed according to their speeds. Whatever it takes to make the groups work number wise is what is going to determine the breakouts for Class B and Class C. It makes no sense for example to have 50 cars in Class B and only say 20 Cars in Class C. Obviously I don't run this event so things could change, but this is my understanding of it from those that do.
Last RR the top speed was 160 with 163 break out..

I bet since they raised it 100hp that ~165 will be the top speed.. and and ~168 the break out.

Not "official numbers".. but sound about right to me

Andrew is just mad
Old 04-20-2015, 10:07 AM
  #7  
nareg
Racer
 
nareg's Avatar
 
Member Since: Mar 2011
Location: Houston Tx
Posts: 282
Received 8 Likes on 7 Posts

Default

Can't wait should be fun
Old 04-20-2015, 10:32 AM
  #8  
TurboVic
Racer
 
TurboVic's Avatar
 
Member Since: Aug 2008
Location: Wylie Texas
Posts: 415
Likes: 0
Received 3 Likes on 2 Posts

Default

less than two weeks to go. i can't wait.

i sure hope the breakout speed will be higher than 165mph.
Old 04-20-2015, 10:45 AM
  #9  
Proace4
Racer
 
Proace4's Avatar
 
Member Since: Aug 2011
Location: Wichita Ks
Posts: 350
Likes: 0
Received 1 Like on 1 Post
Default

Really wish I didn't have to back out. My 164mph(w/ YSi) at TI would have made me really competitive, let alone now that I have the F1x on and running well. Ugh... I hate work, but its a vicious cycle I guess..

Good luck to any of you running!
Old 04-21-2015, 11:00 AM
  #10  
DarkHorse13
Advanced
 
DarkHorse13's Avatar
 
Member Since: Jun 2014
Location: OKC OK
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default

I'll be bringing my TGT, looking forward to meeting everyone.

Last year was super competitive, but this year will be full of sandbagging.

i know of a few people that are coming that made 1XXX or 1100 on the dot on pump, but are coming with tanks of C16 and more timing, which is kind of BS, but all in good fun.

looking forward to the weekend!
Old 04-21-2015, 11:51 AM
  #11  
White_Lightning
Melting Slicks
 
White_Lightning's Avatar
 
Member Since: Oct 2000
Location: dfw Texas
Posts: 3,368
Received 30 Likes on 26 Posts

Default

Originally Posted by DarkHorse13
I'll be bringing my TGT, looking forward to meeting everyone.

Last year was super competitive, but this year will be full of sandbagging.

i know of a few people that are coming that made 1XXX or 1100 on the dot on pump, but are coming with tanks of C16 and more timing, which is kind of BS, but all in good fun.

looking forward to the weekend!
who?

also keep in mind.. if they break out.. they get DQ'ed..
Old 04-21-2015, 11:52 AM
  #12  
DarkHorse13
Advanced
 
DarkHorse13's Avatar
 
Member Since: Jun 2014
Location: OKC OK
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default

not saying names, but we will see.

i'm curious to see if the crew will have someone close to the finish to see if people are lifting off, or hitting the brakes.
Old 04-21-2015, 12:30 PM
  #13  
TurboVic
Racer
 
TurboVic's Avatar
 
Member Since: Aug 2008
Location: Wylie Texas
Posts: 415
Likes: 0
Received 3 Likes on 2 Posts

Default

Originally Posted by DarkHorse13
not saying names, but we will see.

i'm curious to see if the crew will have someone close to the finish to see if people are lifting off, or hitting the brakes.
i'm guessing most of the turbo cars will be running on gates on the early rounds.
Old 04-21-2015, 12:32 PM
  #14  
DarkHorse13
Advanced
 
DarkHorse13's Avatar
 
Member Since: Jun 2014
Location: OKC OK
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default

i'm running all of it, all the time!

nobody is getting just wastegate!
Old 04-21-2015, 12:54 PM
  #15  
EX1
Melting Slicks
 
EX1's Avatar
 
Member Since: Jan 2010
Location: Lubbock TX
Posts: 2,137
Received 21 Likes on 17 Posts

Default

Had some delays at AMP so I may or may not have time to do my suspension work. I hope she does "ok" on my stock setup.
Old 04-21-2015, 02:50 PM
  #16  
nareg
Racer
 
nareg's Avatar
 
Member Since: Mar 2011
Location: Houston Tx
Posts: 282
Received 8 Likes on 7 Posts

Default

I hope my car will be close to 160. What's the starting speed 50 or 60?
Old 04-21-2015, 03:28 PM
  #17  
White_Lightning
Melting Slicks
 
White_Lightning's Avatar
 
Member Since: Oct 2000
Location: dfw Texas
Posts: 3,368
Received 30 Likes on 26 Posts

Default

Originally Posted by nareg
I hope my car will be close to 160. What's the starting speed 50 or 60?
60

for comparison.. when my car made 900 and was heavy as heck.. i ran 157-159.. i think you should be around there.

Get notified of new replies

To Forced Induction Cars at Runway Rivalry

Old 04-21-2015, 06:21 PM
  #18  
TurboVic
Racer
 
TurboVic's Avatar
 
Member Since: Aug 2008
Location: Wylie Texas
Posts: 415
Likes: 0
Received 3 Likes on 2 Posts

Default

Originally Posted by nareg
I hope my car will be close to 160. What's the starting speed 50 or 60?
What's the set up(mods) with your car if you don't mind me asking? Manual trans GS right?
Old 04-21-2015, 09:06 PM
  #19  
nareg
Racer
 
nareg's Avatar
 
Member Since: Mar 2011
Location: Houston Tx
Posts: 282
Received 8 Likes on 7 Posts

Default

Originally Posted by TurboVic
What's the set up(mods) with your car if you don't mind me asking? Manual trans GS right?
Yes manual trans GS piston/rod motor with a D1 on e85 and 100 shot. You're running a F1R?
Old 04-21-2015, 10:01 PM
  #20  
TurboVic
Racer
 
TurboVic's Avatar
 
Member Since: Aug 2008
Location: Wylie Texas
Posts: 415
Likes: 0
Received 3 Likes on 2 Posts

Default

Originally Posted by nareg
Yes manual trans GS piston/rod motor with a D1 on e85 and 100 shot. You're running a F1R?
sounds like a good set up. your car should run well at RR.

i switched to an F1X.


Quick Reply: Forced Induction Cars at Runway Rivalry



All times are GMT -4. The time now is 06:24 PM.