Need Procharger intercooler piping and elbow
#1
Pro
Thread Starter
Need Procharger intercooler piping and elbow
So I got the car up on jack stands and noticed my bottom intercooler pipe is rusted and bent and the couplers have rubbed and are starting to rip on each side. It's a single fmic setup. Was wondering where I could get just the bottom pipe that runs in front of the harmonic ballancer and each coupler that ataches to each side of it?
#2
Platinum Supporting Vendor
So I got the car up on jack stands and noticed my bottom intercooler pipe is rusted and bent and the couplers have rubbed and are starting to rip on each side. It's a single fmic setup. Was wondering where I could get just the bottom pipe that runs in front of the harmonic ballancer and each coupler that ataches to each side of it?
__________________
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
A&A CORVETTE
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
A&A CORVETTE
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
#4
Pro
Thread Starter
My piping is different than most kits. It comes down from the procharger and than runs in front of the ballancer across to the driver side to the intercooler. Like in the pics below
#5
Pro
Thread Starter