GeneSch

Has anyone used the devils own set up on their cars? Local shop said this is what they use. Trying to see what everyone thinks of the kit and what options are good.

http://www.alcohol-injection.com/en/...-stage-1a.html

schpenxel

Not sure if they have other kits, but I don't think I'd want something that is a simple "on" or "off". Ideally they ramp up with airflow or boost

neutron82

I have their nozzles/holders and had them make me new stainless lines so I could move my check valve down to the pump rather than the frame rail... the rest of my kit is alky control though, the only reason I changed the other stuff was purely for looks... they were cool people to deal with though and residents of the 405, fastest street cars in the nation

if you do decide to buy their kit pm me, I have a 10% off gift certificate that they sent me and I don't think I will be needing anything else from them anytime soon

chevyguy3

Installed one of their kits on an Audi. Was junk compared to the Alkycontrol kits in just about every aspect. Spend the extra money.

Jtaugner

I had their Direct Port meth kit on my SRT4 years ago. Never had problems with it, also used their Pre-Mixed methanol.

I use the AlkyControl kit like most the forums on the Corvette. Being plug and play and specific to my platform was a huge selling point.

GeneSch

Thank you all. I will look at the A/control set up.

SquatchMachining

I used their nozzles for a direct port meth setup but that is about it. Pump and controller you cannot beat Alkycontrol.

junk c5

I have used the AIS kit and the devils own kit. I prefer the devils own kit, I did the upgrade with the dual stage controller. I am going to E85 so if you are interested PM me and we can work something out. My kit is in great condition and has little use as I hardly drive the car. I have the duel nozzle trunk mount kit with the controller