C6 Widebody ecs 1500 dual nozzle kooks Straightline performance
#1
Burning Brakes
Thread Starter
C6 Widebody ecs 1500 dual nozzle kooks Straightline performance
Hey guys I have a 09 ecs1500 kit widebody
Dual nozzle meth
Kooks
A6 Trans. When I leave car in drive it always hits the limiter so I had to paddle shift
Here is my slip. Should the et be a little lower with this mph ?
Dual nozzle meth
Kooks
A6 Trans. When I leave car in drive it always hits the limiter so I had to paddle shift
Here is my slip. Should the et be a little lower with this mph ?
#5
It may be hooking but the stock converter is not letting you leave as hard as you would like. I ran similar times with 6 mph less.
My last pass before my ls2 died was 10.709@132.27 with a 1.523 60'.
Ls2, D1, kooks, dual nozzle methanol, 3000 stall vigilante converter. 295/45/17 MT Street Radials.
I sometimes wish I had more stall at the track but it works great as a street car.
My last pass before my ls2 died was 10.709@132.27 with a 1.523 60'.
Ls2, D1, kooks, dual nozzle methanol, 3000 stall vigilante converter. 295/45/17 MT Street Radials.
I sometimes wish I had more stall at the track but it works great as a street car.
#7
#13
Racer
Those tires are heavy as well (35lbs ea.) and 27.5 tall. A lighter and shorter tire will help with the 60ft. You don’t need a 345 to hook at a decent prepped track.
#14
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
Chrome? What is that.. a wrap or what??
#16
With that mph and a better 60 you could go high nines. I have a friend that goes 9.9 at 136 in his fox body. It's all in the launch. He cuts 1.3 60s. You have nice mph though. Car moves out for sure.
#17
Burning Brakes
Thread Starter
Thanks guys. I'm going to put a converter in it and see how she does. The wrap is a love it or hate it lol. Most corvette guys don't like it. Car is white underneath my buddy painted his car same scheme as me so I wanted different. I love it gets soooo many looks
#18
That is balsy...