Hello from Calvo Motorsports in Austin,Tx
#1
Former Vendor
Thread Starter
Hello from Calvo Motorsports in Austin,Tx
Just wanted to introduce ourselves. We are a new vendor on the forum. But are pretty well known in the texas area and with the viper guys. Our shop car is the orange gen V TT viper. Our facility is 20k sq foot complete climate controlled shop 5 lifts,dyno room which is a LOADED dyno, also includes a nice showroom. We have an IN house machine shop for all those custom needed cnc billet brackets when needed on builds along with many other machines!!
But remember just because our shop car is a viper dont get it wrong that we dont build an ls monsters. We have built some pretty awesome corvettes. Have a few twin turbos builds under out belt with them including actually the first twin turbo c7, 1200rwhp c6z (at 14lbs of boost spinning on the dyno..car will make 1600rwhp here in a few monthes,customer wants more power so going with bigger turbos and a little nitrous also. It will make 1600rwhp on boost alone!!!)a couple twin turbo 2009+ ctsv..
So we can do it all from bolting on exhaust,cold air intake and tune, to head and cam packages, bolt on ECS or A&A supercharger kit, built motors and nitrous to full out big power customer twin turbo kit,pro efi or motec,etc!!!!!
Thanks for the great opportunity to be on the forum and hopefully help alot of you guys out
And to show our thanks we will be offering awesome ECS and A&A supercharger packages installed and tuned. Also header,cold air and tune packages or even header,cam,installed pacakges. Will make a post later on that. Any question post away or give me a call or PM!!!!
Now what forums are good for.. Awesome pics with chicks lol
This is a 2000hp corvette Z06 we are currently putting back together we build from ground up.
But remember just because our shop car is a viper dont get it wrong that we dont build an ls monsters. We have built some pretty awesome corvettes. Have a few twin turbos builds under out belt with them including actually the first twin turbo c7, 1200rwhp c6z (at 14lbs of boost spinning on the dyno..car will make 1600rwhp here in a few monthes,customer wants more power so going with bigger turbos and a little nitrous also. It will make 1600rwhp on boost alone!!!)a couple twin turbo 2009+ ctsv..
So we can do it all from bolting on exhaust,cold air intake and tune, to head and cam packages, bolt on ECS or A&A supercharger kit, built motors and nitrous to full out big power customer twin turbo kit,pro efi or motec,etc!!!!!
Thanks for the great opportunity to be on the forum and hopefully help alot of you guys out
And to show our thanks we will be offering awesome ECS and A&A supercharger packages installed and tuned. Also header,cold air and tune packages or even header,cam,installed pacakges. Will make a post later on that. Any question post away or give me a call or PM!!!!
Now what forums are good for.. Awesome pics with chicks lol
This is a 2000hp corvette Z06 we are currently putting back together we build from ground up.
Last edited by mike@calvomotorsport; 11-10-2015 at 04:44 PM.
#2
Advanced
Awesome to see you guys on the forum, welcome!
I recall that vette you guys built was a mid-mount kit correct? Weren't you guys attempting to jig that kit for reproduction?
I recall that vette you guys built was a mid-mount kit correct? Weren't you guys attempting to jig that kit for reproduction?
#4
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
I, too, like scantily clad women
#5
Former Vendor
Thread Starter
thanks man... the red vid turbo location is up above in my first post under the under the hood pic. they where located where the gas tank is at yes. and we decided not to do a jig on the setup. That setup is best custom built in house
#7
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
Yes sir
Last edited by schpenxel; 11-10-2015 at 03:12 PM.
#10
Former Vendor
Thread Starter
#12
Team Owner
Welcome. I miss Austin. One of my favorite places I lived. Went to Bowie high school.
#13
Le Mans Master
I spent a lot of time in Austin while attending SW TX State U in San Marcos. Now better known as TX State. Loved it. That area has changed just a little since I was there in the late '70's. If I could have figured out a way to make a living there.....I'd still be there. Welcome to the forum! I'm not too far east of you now. Maybe we'll do a little bidness..
Last edited by old motorhead; 11-10-2015 at 09:06 PM.
#14
Former Vendor
Thread Starter
I spent a lot of time in Austin while attending SW TX State U in San Marcos. Now better known as TX State. Loved it. That area has changed just a little since I was there in the late '70's. If I could have figured out a way to make a living there.....I'd still be there. Welcome to the forum! I'm not too far east of you now. Maybe we'll do a little bidness..
#15
Former Vendor
Thread Starter
Thanks man!!! I try my best to provide the best customer service I can. A try to build a friendship with all customer! Heck even if they aren't customers and I just provide them with tech support
Last edited by mike@calvomotorsport; 11-11-2015 at 09:47 AM.
#16
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
Great guys, Pretty fast cars!! lol....
#18
Former Vendor
Thread Starter