UmX

So BaP + z06 pump wont do it? even to like 700ish? What about like the inline set up form ECS

Dude_man

It could, I've personally never tried it. I'm not a fan of boost of pumps so I'm biased. I prefer a secondary pump like ecs

UmX

this kit right..

http://www.eastcoastsupercharging.co...ategory_id=431

so id remove the boost pump and install this in place..

schpenxel

Yeah

UmX

Yea I want the Meth kit gone. Friday it decided to just start spraying for no reason. My throttle body upper intake and piping was soak with Meth juice. I don't want to risk it

schpenxel

You are the 2nd person that has had that happen.. one guy had his intercooler full of methanol. Removed the pipe on the side of the intercooler and meth dumped out.

UmX

i had to hose out my intercooler... -.-

schpenxel

Damn. That sucks.. I wonder what causes it to happen?

UmX

stupid electronic sh*T lol..

I might call chris order that stage 1.. ANd get this alky/meth kit off my car... and have the tuner adjust my tune

Spoolin8

Im at 743 on a ls2 with BAP 93 running 50/50 boost juice. Car runs extremely rich but im sure its a matter of time before my pump goes...

DOUG @ ECS

It's amazing how well these cars take to boost with proper octane and tuning. I have lost count of how many C6's we have in the 700 plus club, but it's hundreds by now.

Go for it!

BoosTTed C6

When you call to order a Stage 1 fuel system, ask him about the used one that came off of my car.

Sitting there boxed and ready for shipping........

Had to come off the car for the new build - Stage 1 just will not support 1300+ whpr.

I never ran the BAP, only their fuel system. Supported 760 on a LS2 all day long and I ran the car hard.

UmX

Doug can you chime in on his ^ kit.. I think Chris was Saying I need the A1000 for e85 vs the bosch tho

Dude_man

I ran a Walbro 450 intank and dw350il which is more than enough for your goals.

DOUG @ ECS

Depends how much power you are looking to make, the system mentioned above is aluminum though, our E85 kits come coated for corrosion resistance. We typically go with the A1000 pump on E85 builds because they are rated for that fuel and they are usually high HP builds. We have not been able to find anything on the Bosch pumps being compatible with E85.

Good deal for someone though, it comes with the left side tank and the pick up mounted already.

Dude_man

You should look into the dw pumps, e85 compatible, same size, similar pricing, and flow more than the bosch.

DOUG @ ECS

Thanks, we actually switched to the AEM pump recently, same size, flows more and E85 compatible. We have also started coating all C6 fuel blocks so the are always E85 ready. We started to run into manufacturing flaws with the Bosch pumps, which was strange since I always considered them a pinnacle manufacturer.

Shame we can't get E85 here in NJ though.

Dude_man

Dont get me started on bosch... Worst customer service ever, everyone there is clueless, and we spend 300K+ a year with them.

schpenxel

Big companies are awesome

Biggraz

I spun a rod at 800 whp at 16.5lbs lol, now it's built