Dudeman v2.0
#1
Drifting
Thread Starter
Dudeman v2.0
I will be building the new build in 3 stages
Stage 1
Twin front mount s366s
Cxracing c6 turbo headers
Hood exit exhaust
Holley Hiram intake
Griffin radiator
Keeping ac possible custom lines
Abs relocated to the fender
15 gallon fuel cell
Twin dw350il pumps for now
-10 feed split to -8 at the backs of both rails
-8 from the front of both rails to the fpr
-8 return
Stage 2
Engine mounted Reid power glide
Custom mounts
Custom drive shaft
Narrowed ford 8.8 solid axle
Custom ladder bar suspension
Custom mini tub
Plan is the run mt 315 pros (29.9" tall)
Stage 3
Building engine(not sure on the specs as of yet.
Stage 1
Twin front mount s366s
Cxracing c6 turbo headers
Hood exit exhaust
Holley Hiram intake
Griffin radiator
Keeping ac possible custom lines
Abs relocated to the fender
15 gallon fuel cell
Twin dw350il pumps for now
-10 feed split to -8 at the backs of both rails
-8 from the front of both rails to the fpr
-8 return
Stage 2
Engine mounted Reid power glide
Custom mounts
Custom drive shaft
Narrowed ford 8.8 solid axle
Custom ladder bar suspension
Custom mini tub
Plan is the run mt 315 pros (29.9" tall)
Stage 3
Building engine(not sure on the specs as of yet.
The following users liked this post:
Arctic Vette (04-29-2016)
#2
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
Nice!
#3
subscribed :O i reallly want to see how you do the transmission to the rear end and im glad the cxracing headers fit pretty good from the looks of it i was contemplating their single setup hot side
#5
Drifting
Thread Starter
Thanks guys
The cxracing headers are definitely worth the price, but they are not high end by any means. I'll eventually make my own headers, I just wanted as little down time as possible right now.
The cxracing headers are definitely worth the price, but they are not high end by any means. I'll eventually make my own headers, I just wanted as little down time as possible right now.
#10
Drifting
Thread Starter
If Im not going spearfishing all weekend, I should have the frame rails boxed off and the bumper beam bent and welded on. And hopefully a permanent mount for the turbos. My radiator finally came so I have a better idea of where everything will be.
#11
What radiator you got? Share the knowledge 👌🏻 post pics lol
#12
Drifting
Thread Starter
#14
Looks like it's gonna be a nice build. Just curious because I have also been looking at these headers and was wondering if you are going to have air conditioning and where if you are what it's going to take to mount the condensing coil.
#15
Drifting
Thread Starter
Yes, still keeping Ac, my setup is very far from traditional on how everything is being placed. I'll be sure to update pics as the build goes on so you can see how it's mounted
#16
Melting Slicks
I wasn't aware the car had been hit in the front. Hopefully you are ok. Did you apply for a rebuilt title?
#18
Sick builder subd!
#19
Melting Slicks