2005 Vette making a 9 second pass with stock LS2 and A&A V3 Si-trim Kit
#1
Platinum Supporting Vendor
Thread Starter
2005 Vette making a 9 second pass with stock LS2 and A&A V3 Si-trim Kit
He is even still running the stock cam. Such a great combo and runs flawless.
It made 645 rwhp & 592 rwtq on the dyno thru the automatic trans. Ran 9.99 @ 137mph in 1/4 mile.
Video link to the 9 second pass.
http://vid69.photobucket.com/albums/...psllegboda.mp4
It made 645 rwhp & 592 rwtq on the dyno thru the automatic trans. Ran 9.99 @ 137mph in 1/4 mile.
Video link to the 9 second pass.
http://vid69.photobucket.com/albums/...psllegboda.mp4
__________________
Thanks, Josh Dodson
PLEASE TAKE A MOMENT TO VISIT OUR NEW WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
A&A CORVETTE PERFORMANCE
477 LAMBERT ST Ste A
OXNARD CA 93036
(805) 278-4107
Instagram @aacorvettesuperchargers
• Facebook.com/AACorvette •
Thanks, Josh Dodson
PLEASE TAKE A MOMENT TO VISIT OUR NEW WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
A&A CORVETTE PERFORMANCE
477 LAMBERT ST Ste A
OXNARD CA 93036
(805) 278-4107
Instagram @aacorvettesuperchargers
• Facebook.com/AACorvette •
The following 3 users liked this post by Josh@AandASuperchargers:
Popular Reply
04-30-2016, 11:34 AM
Details
2005 Vette Z51(3305 lbs w/o driver)
A & A V3 Si kit/3.4" pulley
Comp Cam 918 Valve Springs/Ti retainers/Comp Cam pushrods
Stock Cam/Short Block
Kooks LT 1 3/4" Headers/X-pipe
Alkycontrol methanol(single)
PI 3400 stall converter/rebuilt 4L60E
Stock Rear
Tuned By Lethal Racing
#4
Platinum Supporting Vendor
Thread Starter
I'll see if he can chime in for you guys.
#5
All the more reason to keep my Si. In for some details!
#9
Melting Slicks
The Si is an amazing head unit, I don't know why you were doubting it. It will perform, it just has its limits. I don't think its limits are outside of your stated though. You're going to max it out, but it'll make your 7xxwhp with the right pulley combo and fuel.
p.s. You'd be hard pressed to find a stalled auto 3,1xx-3,2xxlb car that can't get into the 9s at that whp on DRs.
p.s. You'd be hard pressed to find a stalled auto 3,1xx-3,2xxlb car that can't get into the 9s at that whp on DRs.
#10
Details
2005 Vette Z51(3305 lbs w/o driver)
A & A V3 Si kit/3.4" pulley
Comp Cam 918 Valve Springs/Ti retainers/Comp Cam pushrods
Stock Cam/Short Block
Kooks LT 1 3/4" Headers/X-pipe
Alkycontrol methanol(single)
PI 3400 stall converter/rebuilt 4L60E
Stock Rear
Tuned By Lethal Racing
The following 6 users liked this post by LFZDC:
ajrothm (04-30-2016),
Arctic Vette (04-30-2016),
Boat Racer (05-01-2016),
Josh@AandASuperchargers (05-02-2016),
patc6 (03-12-2020),
and 1 others liked this post.
#13
Very impressive indeed!! How much boost is it making?
#16
Team Owner
2005 Vette Z51(3305 lbs w/o driver)
A & A V3 Si kit/3.4" pulley
Comp Cam 918 Valve Springs/Ti retainers/Comp Cam pushrods
Stock Cam/Short Block
Kooks LT 1 3/4" Headers/X-pipe
Alkycontrol methanol(single)
PI 3400 stall converter/rebuilt 4L60E
Stock Rear
Tuned By Lethal Racing
A & A V3 Si kit/3.4" pulley
Comp Cam 918 Valve Springs/Ti retainers/Comp Cam pushrods
Stock Cam/Short Block
Kooks LT 1 3/4" Headers/X-pipe
Alkycontrol methanol(single)
PI 3400 stall converter/rebuilt 4L60E
Stock Rear
Tuned By Lethal Racing
Thanks,Matt
#18
Burning Brakes
#20
Burning Brakes
I like it! I hope to pull the trigger on a kit from A&A soon.
May I ask what is your setup for fuel system?
May I ask what is your setup for fuel system?
Last edited by da6speed; 05-01-2016 at 02:50 PM.