RecMech LSX427 F1x standing mile build
#61
Drifting
#62
Burning Brakes
#64
Pro
Thread Starter
#67
Team Owner
What rockers on the all pros?
The following users liked this post:
jdoyle (06-01-2016)
#70
Pro
Thread Starter
Some of the race car specific items (to meet the rulebook):
Window tabs (4 on windshield, 4 on rear)..
Forming the roof rails...
Chute mount and push bar..
NRG hub and quick release.. Sparco wheel and buttons..
Window tabs (4 on windshield, 4 on rear)..
Forming the roof rails...
Chute mount and push bar..
NRG hub and quick release.. Sparco wheel and buttons..
#71
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
So badass
#73
Pro
Thread Starter
#74
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
What's left to do before the race?
Last edited by schpenxel; 06-01-2016 at 03:41 PM. Reason: ?
#75
Pro
Thread Starter
Mostly little touch up items, plus new chute, side skirts, and maybe a different battery setup. (we are killing the 21lb Braille)
Have new drag radials coming so we can get it on the dyno again and try to get an idea where the power is at. Also need to work on the alarms and safeties in the ProEFI in case something goes wrong.
Then, as long as the chute works, I should be able to see what a full 1.5 mile pull does
Have new drag radials coming so we can get it on the dyno again and try to get an idea where the power is at. Also need to work on the alarms and safeties in the ProEFI in case something goes wrong.
Then, as long as the chute works, I should be able to see what a full 1.5 mile pull does
#76
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
You better have some GoPro's in that thing!
#77
is the push bar further back from the chute mount? is that a wheel on the very end of the push bar? it seems to me that the wheel would make it hard to get a grip on the push bar but this car is my first time to see a push bar. id be interested to hear any additional information.
Last edited by jdoyle; 06-02-2016 at 09:59 AM.
#79
Pro
Thread Starter
#80
Pro
Thread Starter