C6vettegfw

Hey guys I got a 2006 base model corvette with the wide body rear conversion.... I need to know what back spacing to go with to have flush wheels and tires... Do I go with the z06 back spacing or the 7.5 inch back spacing of the base model? I want my wheels and tires to be flush. I'm ordering the weld single bead locks in 15 inch.

Ant-Man

"Weld rts, 18x12 with a 8.7 back spacing....did a brake conversion because they wouldn't clear the Z06 calipers, but now I can fit a 15"

from fb. You should be fine with z51 brakes or base brakes.

C6vettegfw

Just to be clear this is weld rts s71 in 15s

Last 1

7.50 with a lot of grinding on lower A arms

C6vettegfw

Cheers bud yeah the girl from weld just confirmed that as well. She was confused. She thought I was after 17 inch rims.

Unreal

They have an application guide on their website.

Ugh, beadlocks. Such a lame fad IMO

C6vettegfw

well spinning the tire on the wheel is so ething I don't want to do. Seen my buddy do it this summer... Not nice with slicks ugh

b16gsr

couldn't agree more, 15" is a fad too, had 17" M&H work better and feel far more stable on the street than 15"

Last 1

but they look good on these C6 corvette

Steve Haefner

http://weldwheels.com/wp-content/upl...tion-Guide.pdf