C6 Forced Induction/Nitrous C6 Corvette Turbochargers, Superchargers, Pulley Upgrades, Intercoolers, Wet and Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

From stock to 700hp in 3 days

Old 12-16-2016, 05:29 PM
  #1  
Crovette
Advanced
Thread Starter
 
Crovette's Avatar
 
Member Since: Aug 2016
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default From stock to 700hp in 3 days

Car is a 2011 grand sport. 5,000 miles on it. Was bone stock until the bug big me.
Mods are
stock ls3 bottom end and physical heads are untouched. Stock transmission 6speed
aa v3 ti blower 3.8 pulley
60lb injectors
kb bap
dewitts radiator
mighty mouse catchcan
pfadt headers/midpipe
stock npp rear section
custom lunati camshaft
lunati dual spring kit
lunati/trend hardened pushrods

work done and tuned by complete street performance. They have done work on my ctsv and most of my GM friends cars and they are worth the 2 hour one way drive for me. Pricing, knowledge, and clean work is worth the drive.

car drives great for a big blower cam. It is a 229/239 cam with decent amount of chop but drives good without ridiculous surge in lower rpms. Dyno was a dynojet, on 93 octane. No boosters







Last edited by Crovette; 12-16-2016 at 05:34 PM.
Old 12-16-2016, 07:21 PM
  #2  
DanC8
Instructor
 
DanC8's Avatar
 
Member Since: Nov 2015
Location: Dallas, TX
Posts: 187
Received 37 Likes on 32 Posts
Default

Great number for a 3.8 upper. No meth?
Old 12-16-2016, 07:34 PM
  #3  
Crovette
Advanced
Thread Starter
 
Crovette's Avatar
 
Member Since: Aug 2016
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MidLifeC6
Great number for a 3.8 upper. No meth?
no meth... i think the power lies in the cam.... it kicks in so hard around 3500rpms and just goes to 7,000. Boost is around 9.5 to 10psi
Old 12-16-2016, 09:43 PM
  #4  
C U IN REARVEIW
Le Mans Master
 
C U IN REARVEIW's Avatar
 
Member Since: Jan 2009
Location: ocean springs mississippi
Posts: 5,656
Received 109 Likes on 100 Posts

Default

That cam makes some great power!!! Sound clip?

Last edited by C U IN REARVEIW; 12-16-2016 at 09:46 PM.
Old 12-16-2016, 09:56 PM
  #5  
Crovette
Advanced
Thread Starter
 
Crovette's Avatar
 
Member Since: Aug 2016
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default



Old 12-16-2016, 09:57 PM
  #6  
Crovette
Advanced
Thread Starter
 
Crovette's Avatar
 
Member Since: Aug 2016
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by C U IN REARVEIW
That cam makes some great power!!! Sound clip?
Just posted some
Old 12-16-2016, 10:07 PM
  #7  
KM177122
Pro
 
KM177122's Avatar
 
Member Since: Jan 2014
Location: Austin TX
Posts: 590
Received 37 Likes on 37 Posts
Default

Wow! That's great! 3 days! Took me a year to get to that power level and I'm still working through issues with my fuel system. Best of luck!
Old 12-17-2016, 10:46 AM
  #8  
JetstreamGS
Drifting
 
JetstreamGS's Avatar
 
Member Since: Jul 2014
Posts: 1,946
Received 173 Likes on 147 Posts
Default

Wow very nice numbers indeed! I have an identical setup on my GS with a Vengeance blower cam making 651rw on a 3.6" pulley. Your car is a freak! Throw some meth at it for safety.
Old 12-17-2016, 12:08 PM
  #9  
Crovette
Advanced
Thread Starter
 
Crovette's Avatar
 
Member Since: Aug 2016
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by JetstreamGS
Wow very nice numbers indeed! I have an identical setup on my GS with a Vengeance blower cam making 651rw on a 3.6" pulley. Your car is a freak! Throw some meth at it for safety.
before we even did the mods everyone suggested 650 to 675hp ... which i was MORE than happy with.... the car just wanted more and more.. it was also 28degrees ambient air the day we tuned but regardless i am MORE than happy with the numbers. Ill post my cam specs later when i get home... this little v3 ti and the cam work wonders
Old 12-17-2016, 12:34 PM
  #10  
1MEANGS
Melting Slicks
 
1MEANGS's Avatar
 
Member Since: Jul 2011
Location: NJ
Posts: 2,041
Received 24 Likes on 23 Posts

Default

Sick power Iggy... car is gonna run awesome! Those headers look very familiar too best of luck w/ everything... now let's throw a set of drag radials on that bitch and let her eat!
Old 12-17-2016, 12:37 PM
  #11  
realcanuk
Le Mans Master
 
realcanuk's Avatar
 
Member Since: Apr 2011
Location: Montreal
Posts: 7,818
Received 394 Likes on 359 Posts
St. Jude Donor '13

Default

Great results. 28 is great boost weather !! I'm surprised 60lb injectors aren't maxed out with no meth.

Drive carefully !
Old 12-17-2016, 09:06 PM
  #12  
Crovette
Advanced
Thread Starter
 
Crovette's Avatar
 
Member Since: Aug 2016
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by realcanuk
Great results. 28 is great boost weather !! I'm surprised 60lb injectors aren't maxed out with no meth.

Drive carefully !
they actually maxed out at 6500 rpm... they were at full duty cycle from 6500 to 6900... i have 1000's going in next week for safety measures.

no plans to run meth.... car sees no knock and has consistent 11.6 air fuel through the rpm band before 6500rpms. I MIGHT do a fuel setup and e85 and we'll crack 800 hopefully
Old 12-18-2016, 01:36 AM
  #13  
Blk Beauty
Instructor
 
Blk Beauty's Avatar
 
Member Since: Oct 2012
Location: Houston TX
Posts: 137
Received 1 Like on 1 Post
Default

Nice numbers and beautiful car. Be safe out there.
Old 12-18-2016, 08:16 AM
  #14  
Crovette
Advanced
Thread Starter
 
Crovette's Avatar
 
Member Since: Aug 2016
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Blk Beauty
Nice numbers and beautiful car. Be safe out there.
thank u guys... appreciate the feedback and advice! Car is tucked away for winter. Come warmwr weather she'll be on 17x11 welds in the rear on an et street and we'll see how she does.
Old 12-18-2016, 02:43 PM
  #15  
KM177122
Pro
 
KM177122's Avatar
 
Member Since: Jan 2014
Location: Austin TX
Posts: 590
Received 37 Likes on 37 Posts
Default

Originally Posted by Crovette
thank u guys... appreciate the feedback and advice! Car is tucked away for winter. Come warmwr weather she'll be on 17x11 welds in the rear on an et street and we'll see how she does.
Old 12-19-2016, 10:53 AM
  #16  
bmfvette
Drifting
 
bmfvette's Avatar
 
Member Since: Apr 2010
Location: Vetteville Tennessee
Posts: 1,260
Received 115 Likes on 74 Posts

Default

Nice!
Old 01-01-2017, 10:28 AM
  #17  
harpinc
Advanced
 
harpinc's Avatar
 
Member Since: Mar 2012
Location: Dallas Texas
Posts: 66
Received 1 Like on 1 Post
Default

Was this through a 6 speed auto or manual?

Get notified of new replies

To From stock to 700hp in 3 days

Old 01-01-2017, 11:28 AM
  #18  
Crovette
Advanced
Thread Starter
 
Crovette's Avatar
 
Member Since: Aug 2016
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by harpinc
Was this through a 6 speed auto or manual?
manual 6... cars going to get meth done as a safety feature next week
Old 01-01-2017, 11:36 AM
  #19  
JetstreamGS
Drifting
 
JetstreamGS's Avatar
 
Member Since: Jul 2014
Posts: 1,946
Received 173 Likes on 147 Posts
Default

Originally Posted by Crovette
manual 6... cars going to get meth done as a safety feature next week
Good idea! Throw a 3.4 on while you're at it and let her eat!!
Old 01-01-2017, 12:46 PM
  #20  
LSX228R
Pro
 
LSX228R's Avatar
 
Member Since: Apr 2014
Posts: 546
Received 88 Likes on 67 Posts
Default

Wow. Just another example of why the ls3 is one of the best engines ever produced. What do you think it would make with a smaller pulley and meth?

Thread Tools
Search this Thread
Quick Reply: From stock to 700hp in 3 days



All times are GMT -4. The time now is 04:56 AM.