SunsetOrangeCreations

All systems are sold out at this time.

Thanks to all who ordered!

Shipping is Free in the 48 contiguous US states, contact me about shipping AK or HI.

This package would include the New Billy Boat Fusion mufflers for the 2005-2008 C6 that are a direct bolt in for the LS2 and LS3 C6 with stock exhaust manifolds and mid-pipe, as well as the Billy Boat vacuum control retrofit system so that you will have functioning butterflies that open and close at the push of a button on the keyfob remote. The Billy Boat vacuum retrofit kit enables any 2005-2008 C6 that didnt have NPP bi-mode exhaust from the factory to easily add the bi-mode exhaust option to their car.

The Billy Boat vacuum control retrofit kit uses the most reliable source for vacuum, engine vacuum, to supply the souce of vacuum to close the butterflies in the exhaust.

Get the best Bi-mode exhasut available, the Billy Boat C6 Fusion mufflers with 2.5" over axle pipes that are a direct bolt in to any 2005-2008 C6, and the B+B Fusion Vacuum retrofit kit with wireless controller so that you can add the bi-mode system to ANY C6. Your choice of 4" Quad Round tips or 4.5" Quad Oval tips. (B+B X-pipe not included in this package). Retail price is $2050 for this setup.

Shipping is Free in the 48 contiguous US states, contact me about shipping AK or HI.

For only about $250 more than if you bought GM NPP mufflers and an All-in-1 electric vacuum pump retrofit kit, you get the Best Bi-mode mufflers in the world, the Billy Boat Fusions, with the most reliable vacuum control system available, all in one package!

Dont wait for back ordered, damaged GM NPP mufflers. Get youself the best exhaust system right now!

This is a great opportunity to upgrade to the best bi-mode exhaust system in the world and save some money while doing it. You cant go wrong!

Each system is hand built recently by B&B in the USA , so the system you will get is not old shelf stock, it is freshly made and in perfect condition.


4 inch round tip C6 Fusion "retro" systems, and 4.5 inch Oval tip C6 Fusion "retro" systems are in stock and ready to ship within 24 hours of payment. Dont wait, Get yours now!

Ben





If you dont know about the Billy Boat Fusions here is a description from their website .:

What is bi-modal exhaust?
The Fusion is a bi-modal exhaust system, meaning it has two passages, or modes, that the exhaust can travel through the muffler. Each of the mufflers has two outlets, with one side having a butterfly type valve which allows the exhaust flow to be shut off, regulating which side of the muffler the flows exhaust. One side of the muffler is the “quiet” side, and one side is the “loud” side. The “quiet” side is a smaller, muffled and chambered tube, while the “loud” side is 3” tubing straight through.

How loud is it?
Through our development and customer feedback we have shortend the muffler for 2008, making the “loud” side of the muffler “louder”, which results in a tone similar to the famous Bullet system. In the closed position the tone would be slightly louder than the standard Route 66 system.

What controls the valves?
The butterfly is controlled by a vacuum valve, which we built and developed completely in house. On the Z06 and the 2008 C6 with the NPP option, this valve is controlled by the ECU. The valve opens based on RPM and throttle position. The problem is the factory exhaust is very quiet, even with the valve open. Our expertise here at B&B is getting the “tone” right for your Corvette, and we think we nailed this one. Even in the closed position, the tone is deeper, louder, and more aggressive. Open the valves, the overall volume and tone increases to the point heads will turn when you drive up.

What if I have a standard C6?
Not everybody has a Z06 or the 2008 with NPP, right? Billy Boat Performance Exhaust has spent months developing a stand-alone kit which allows any C6 to take advantage of the bi-modal system. The kit come complete with all the wiring, wireless control switch, vacuum line, vacuum accumulator, and vacuum switch needed for installation. We have used the engine as the vacuum source (it is the same port the factory uses for the NPP) and the installation is simple and straight forward.

Is the system 2 ½” or 3”?
On the Z06 the system is 3”, while on the C6 it is 2 ½”. We do have an x-pipe available for both systems, and the standard C6 can be ordered in the 3” diameter to make a complete 3” system.

Will they bolt up to my stock H pipe or my stock headers?
Each part of the system will fit to a stock H-pipe or the stock headers.

Billy Boat has combined the best of the Bullet exhaust with the best new technology to give you the Fusion System for your Corvette. The muffler tips are double walled, 4" round or 4.5" oval. The entire system comes completely polished and the result is a truly spectacular look and sound that gives this high performance sports car the look and aggressive sound which will have heads turning everywhere you go.

All B&B products are precision built in rugged fixtures, completely TIG welded, and are a direct replacement for stock exhaust components and include all hardware and gaskets. No machining, no cutting and no welding means easy installation. We provide the perfect mix of performance, sound and style your Corvette . Each Billy Boat Performance Exhaust system is backed by a lifetime warranty against rust, corrosion or burn through and 2 full years against defects in materials or workmanship.

Here are a few pictures of these top quality mufflers that I took:




Here is a comparison of the Massive B+B 4" round tips compared to the Z06/NPP mufflers tips.



Here are some pictures from Billy Boat's website:



Videos are available at www.bbexhaust.com .

SunsetStroker

How much?

SunsetOrangeCreations

PM sent

not08crmanymore

yes,how much?

wtemple2

How much?

SunsetOrangeCreations

PM sent

SunsetOrangeCreations

PM sent

Xlr8yourC5

I really wish vendors would post prices in posts like this... (not unique to this vendor, it's a common thing it seems)
Rather than requiring a PM (checked their website link/pages via profile page, nothing I could find there there on this...) I know prices change over time, but there's no info I can find on this at their website (as of this posting date)...
I know some say that OEM MFR policies prevent posting of prices publicly but it's frustrating still...

SunsetOrangeCreations

Here is the link to my online store with this product at retail prices that is accessable at all times on my store site:
http://shop.sunsetorangecreations.co...7&productId=12

I am offering a deal that is better than this to CF members only and you need to pm or email to get the lowest price directly from me.

I understand your frustration but my hands are tied as far as advertising prices below that openly on the forum.

Ben

Coxer

How much?

naschmitz

I am interested too -- sent you a PM. I assume I can bolt these up to my American Racing headers and X-pipe? I have the stock mufflers on right now.

SunsetOrangeCreations

PM replied

SunsetOrangeCreations

PM sent

smknvette

How much for a 06 Z06?

Xlr8yourC5

Thanks Ben - (reminds me I need to clean out my inbox too)
I like the design of these, just wish I could get rid of the "blub, blub, blub" (idle) of my C6 (stock manifolds/cats, bassani exhaust currently - like it otherwise)

SunsetOrangeCreations

I dont have any Z06 systems in stock.

Ben

SunsetOrangeCreations

4.5 inch Oval tips are now sold out!

Thanks to all who have purchased!

I still have 4 inch Round tips in stock.

Get yours now.

Ben

RaceRick

PM'd you on this!

SunsetOrangeCreations

Email sent.

RhinoVette

How much??