Advanced Dyno FAST 92 MM Intake sale
08-08-2008, 09:37 PM
#1
Melting Slicks
Thread Starter
Member Since: Oct 2006
Location: Suisun City Ca
Posts: 2,236
Likes: 0
Received 0 Likes
on
0 Posts
Advanced Dyno FAST 92 MM Intake sale
This months special pricing is 839.00 shipped to your door!
New LSX™ 92mm Manifold delivers up to 20+ hp gains & added features
The new LSX™ 92mm Intake Manifold by FAST™ provides a 20+ horsepower increase over the factory LS1 intake with no loss of drivability or low rpm torque. Made from a space-age “Amodel™” polymer material that is 30 percent stronger than the stock unit, the LSX™ 92mm polymer intake avoids becoming a power robbing heat sink –ensuring the coolest, densest fuel/air charge possible for maximum horsepower output. The LSX™ also features integrated nitrous injector ports for use with direct port nitrous injection, and added runner material with witness marks to facilitate porting. In addition, the LSX™ 92mm Manifold features a patented three-piece design that allows easy access for porting and custom modifications. Looking to build some serious horsepower without tearing into your engine? The LSX™ 92mm Intake Manifold from FAST™ will make it happen!
LSX™ Features and Benefits
Bolt--on performance gain for Gen III applications (LS-1, -2 & -6)
Longer, tapered runners increase high rpm hp, yet retain torque
Lighter & stronger, polymer construction avoids heat sink effect
Three-piece design allows easy access for porting & modifications
25% increased plenum volume for less intake charge turbulence
Optional burst panels for increased safety with nitrous or forced induction
Molded-in bosses support machining for direct-port nitrous injection nozzles
These things are flying off the shelves!!! Call us right away for this unreal special before we run out!!!
Shoot us an email at Robert@Advanceddyno.com or call 707 425 3966 for the best pricing around on the 92mm FAST intakes!
We currently have 30+ units ready to go!
Add a GFI Ported LS2 Throttle Body to complete the package! (shown in optional polished finish)
707.425.DYNO (3966)
For the C6 add the optional firewall clearance mod for 200.00 (regularly 250). This will modify the fast intake eliminating the need to modify your firewall.
New LSX™ 92mm Manifold delivers up to 20+ hp gains & added features
The new LSX™ 92mm Intake Manifold by FAST™ provides a 20+ horsepower increase over the factory LS1 intake with no loss of drivability or low rpm torque. Made from a space-age “Amodel™” polymer material that is 30 percent stronger than the stock unit, the LSX™ 92mm polymer intake avoids becoming a power robbing heat sink –ensuring the coolest, densest fuel/air charge possible for maximum horsepower output. The LSX™ also features integrated nitrous injector ports for use with direct port nitrous injection, and added runner material with witness marks to facilitate porting. In addition, the LSX™ 92mm Manifold features a patented three-piece design that allows easy access for porting and custom modifications. Looking to build some serious horsepower without tearing into your engine? The LSX™ 92mm Intake Manifold from FAST™ will make it happen!
LSX™ Features and Benefits
Bolt--on performance gain for Gen III applications (LS-1, -2 & -6)
Longer, tapered runners increase high rpm hp, yet retain torque
Lighter & stronger, polymer construction avoids heat sink effect
Three-piece design allows easy access for porting & modifications
25% increased plenum volume for less intake charge turbulence
Optional burst panels for increased safety with nitrous or forced induction
Molded-in bosses support machining for direct-port nitrous injection nozzles
These things are flying off the shelves!!! Call us right away for this unreal special before we run out!!!
Shoot us an email at Robert@Advanceddyno.com or call 707 425 3966 for the best pricing around on the 92mm FAST intakes!
We currently have 30+ units ready to go!
Add a GFI Ported LS2 Throttle Body to complete the package! (shown in optional polished finish)
707.425.DYNO (3966)
For the C6 add the optional firewall clearance mod for 200.00 (regularly 250). This will modify the fast intake eliminating the need to modify your firewall.
