OBX Header Group Buy Round 2 $649.99 Shipped!
05-29-2009, 06:13 PM
#1
Former Vendor
Thread Starter
OBX Header Group Buy Round 2 $649.99 Shipped!
Round 2 of the OBX Header Group Buy
I have 20 sets of OBX Longtube Headers on hold for me with OBX. They are listed as LS2 headers but we have info from one person from last group buy they will work on the LS3 C6 as well if you wanted to do this.
see this thread for info
http://forums.corvetteforum.com/c6-corvette-general-discussion/2337270-ls3-install-on-group-purchase-obx-long-tube-headers.html
see this thread for info
http://forums.corvetteforum.com/c6-corvette-general-discussion/2337270-ls3-install-on-group-purchase-obx-long-tube-headers.html
20 Sets available for me for this Group Buy
Once 20 orders are in that will be all I have until OBX gets another shipment in.
Once 20 orders are in that will be all I have until OBX gets another shipment in.
$649.99
Shipped
lower 48 states
Canada, Hawaii Ect. PM for added shipping charges
Shipped
lower 48 states
Canada, Hawaii Ect. PM for added shipping charges
Thanks to everyone again for the first Group Buy on these. I have installed these myself last weekend on my C5 and Love Them!
Application:
2005-2008 Chevy Corvette Corvette C6 6.0L V8.
2005-2008 Chevy Corvette Corvette C6 6.0L V8.
Specification.
Primary Port Diameter: 1.70 Inch I.D.
2.50" All The Way From Collector To X-Pipe.
Primary Port Diameter: 1.70 Inch I.D.
2.50" All The Way From Collector To X-Pipe.
100% T304 Stainless Steel..
Flange Thickness:3/8 Inch.
Runner Wall Thickness: 16 Gauge(1.5mm)
Style:
Full Length
Item Description:
OBX Genuine Products Design and Quality of OBX U.S.A.
Runner Wall Thickness: 16 Gauge(1.5mm)
Style:
Full Length
Item Description:
OBX Genuine Products Design and Quality of OBX U.S.A.
High Performance Track Proven Quality Headers From OBX Racing Sports.
Direct Bolt On Set Up Without Any Modification.
Utilize Factory Sensors.
Header Gaskets Included & Cat Replacement Resonators Included.
Dyno Proven, Increase Low End Torque And Horse Power.
Great Throttle Response With Great Sound.
Get Up To 35% Better Exhaust Gas Flow By Replacing The Restrictive And Inefficient Factory Cast Log Manifolds With These Precision Built High Flow Headers.
Increase Better/Smoother Exhaust Flow At Higher RPM To Generate More Power And Maximum Performance Out Of Your Engine.
Beautifully Constructed With High Quality SUS-T304 Stainless Steel For Best Durability.
Mirror Polished Finishing.
CNC Machined 3/8 inch Thick Flange(Best You Can Buy).
This is Great Power Package to Unleashed Hidden Ponies From Your American Muscle.
Best Price In The Industry.
Great Fitment, Great Quality And Great Price Guaranteed.
Actual Pictures, What You See Is What You Get!
Come With OBX Life Time Warranty.
Direct Bolt On Set Up Without Any Modification.
Utilize Factory Sensors.
Header Gaskets Included & Cat Replacement Resonators Included.
Dyno Proven, Increase Low End Torque And Horse Power.
Great Throttle Response With Great Sound.
Get Up To 35% Better Exhaust Gas Flow By Replacing The Restrictive And Inefficient Factory Cast Log Manifolds With These Precision Built High Flow Headers.
Increase Better/Smoother Exhaust Flow At Higher RPM To Generate More Power And Maximum Performance Out Of Your Engine.
Beautifully Constructed With High Quality SUS-T304 Stainless Steel For Best Durability.
Mirror Polished Finishing.
CNC Machined 3/8 inch Thick Flange(Best You Can Buy).
This is Great Power Package to Unleashed Hidden Ponies From Your American Muscle.
Best Price In The Industry.
Great Fitment, Great Quality And Great Price Guaranteed.
Actual Pictures, What You See Is What You Get!
Come With OBX Life Time Warranty.
AS SOON AS ALL 20 ORDERS ARE IN I WILL SEND ORDERS FOR SHIPMENT
05-29-2009, 07:20 PM
#2
Former Vendor
Thread Starter
Comparison Video's
Stock:
http://www.youtube.com/watch?v=l_f5JuC5qwY
B&B Fusions:
http://www.youtube.com/watch?v=apdKk9d-UB0
Fusions & Long Tube Headers
http://www.youtube.com/watch?v=penD7dNgMys
Notice, no cutting needed to make O2 sensors fit, there is clearance all around all 4 sensors....
Stock:
http://www.youtube.com/watch?v=l_f5JuC5qwY
B&B Fusions:
http://www.youtube.com/watch?v=apdKk9d-UB0
Fusions & Long Tube Headers
http://www.youtube.com/watch?v=penD7dNgMys
Notice, no cutting needed to make O2 sensors fit, there is clearance all around all 4 sensors....
05-29-2009, 11:45 PM
#3
Safety Car
so what comes with the sale? just the headers or other stuff? the picture shows all the way back to the mufflers and the site talks about the cat resinators (i think thats what they are called??) thxs for the sale, BTW i have an ls3 so if the yfit i will take a set. regards, paul
05-30-2009, 12:05 AM
#4
Former Vendor
Thread Starter
so what comes with the sale? just the headers or other stuff? the picture shows all the way back to the mufflers and the site talks about the cat resinators (i think thats what they are called??) thxs for the sale, BTW i have an ls3 so if the yfit i will take a set. regards, paul
Hey Paul
Everything from the heads back to the cat back is included. The resonators are what they use for cats. Only thing you will need like Jamey mentions in his thread is some O2 extansions as the factory ones are not long enough.
The pics shown ARE headers on an LS3. So this shows they WILL fit an LS3
Jamey was nice enough to take a bunch of pics for us and give some feedback on his install.
I put a set on my C5 last weekend and love the fit, sound, looks, everything involved. I needed 8 longer bolts with my set but to me that wasnt a big deal.
I hope this answers your questions. If not please ask more
Thanks for looking
Dennis
05-30-2009, 03:47 PM
#7
Former Vendor
Thread Starter
05-30-2009, 10:30 PM
#9
Former Vendor
Thread Starter
yes your bullets will bolt to them
I did not need anything different for my plug wires on my c5. Maybe Jamey will help answer for me on his C6 install.
The Bullets sound awesome at WOT with these
05-30-2009, 11:19 PM
#11
Former Vendor
Thread Starter
05-30-2009, 11:34 PM
#12
Too Much Fun
05-30-2009, 11:35 PM
#13
Too Much Fun
05-30-2009, 11:42 PM
#14
Former Vendor
Thread Starter
05-31-2009, 12:01 AM
#16
Too Much Fun
Guys and girls, don't let the price of these headers scare you away...these are VERY NICE and the quality appears to be equal (at a minimum) to higher priced headers. I was hesitant at first about the cat resonators, but now that they are on I LOVE THE SOUND!!!!!!
ps...I am in no ways tied to the seller of these headers other than being 1 VERY SATISFIED CUSTOMER IN EVERY ASPECT OF MY PURCHASE!!!!!! And if there is anybody close to north alabama I will be glad to meet you and let you hear/see the headers...
ps...I am in no ways tied to the seller of these headers other than being 1 VERY SATISFIED CUSTOMER IN EVERY ASPECT OF MY PURCHASE!!!!!! And if there is anybody close to north alabama I will be glad to meet you and let you hear/see the headers...
05-31-2009, 12:10 AM
#17
Former Vendor
Thread Starter
yep
you will need them. The O2 sensors are located in a different spot from factory is why and the factory O2 wires will not reach them
We needed them on my C5 as well because of this
05-31-2009, 12:10 AM
#18
Former Vendor
Thread Starter
Guys and girls, don't let the price of these headers scare you away...these are VERY NICE and the quality appears to be equal (at a minimum) to higher priced headers. I was hesitant at first about the cat resonators, but now that they are on I LOVE THE SOUND!!!!!!
ps...I am in no ways tied to the seller of these headers other than being 1 VERY SATISFIED CUSTOMER IN EVERY ASPECT OF MY PURCHASE!!!!!! And if there is anybody close to north alabama I will be glad to meet you and let you hear/see the headers...
ps...I am in no ways tied to the seller of these headers other than being 1 VERY SATISFIED CUSTOMER IN EVERY ASPECT OF MY PURCHASE!!!!!! And if there is anybody close to north alabama I will be glad to meet you and let you hear/see the headers...
got to love happy customers
05-31-2009, 01:38 AM
#19
Burning Brakes
I purchased a set in the last group buy from OBX. I am 100% happy with both the customer service and the quality of the header and x-pipe. If your on the fence don't be, these headers are great and can be had for a fraction of most others. With the money I saved I picked up a ported "Spin"FAST!!
