** VMax Painted and unpainted CNC Spiral Ported Throttle Bodies - Lowest Price **
#1
Former Vendor
Thread Starter
** VMax Painted and unpainted CNC Spiral Ported Throttle Bodies - Lowest Price **
Bringing the sure fire BANG FOR THE BUCK to Corvette Forum!!
VMax Performance, the leader in CNC Spiral Ported Throttle Bodies teaming up with Southwest Speed LLC to bring to you the PAINTED TO MATCH Throttle Body that completes your underhood experience.
-Consistent 8-12 rwhp gains with no tune required!
-Easy to install with basic handtools in under 30 minutes!
-Tightens up the look of your Engine bay with the Painted to Match option.
VMax Performance, the leader in CNC Spiral Ported Throttle Bodies teaming up with Southwest Speed LLC to bring to you the PAINTED TO MATCH Throttle Body that completes your underhood experience.
-Consistent 8-12 rwhp gains with no tune required!
-Easy to install with basic handtools in under 30 minutes!
-Tightens up the look of your Engine bay with the Painted to Match option.
Last edited by Southwest Speed; 04-22-2013 at 11:02 AM.
#3
Former Vendor
Thread Starter
Yes, we have the LS2/7 and LS9 versions as well. The core charges are a bit more on those ones, but we're happy to accommodate!
Just PM me and we'll get ya hooked up in plain or whatever finish you need.
Thanks and appreciate the orders and support!
Ivan @ Southwest Speed
Just PM me and we'll get ya hooked up in plain or whatever finish you need.
Thanks and appreciate the orders and support!
Ivan @ Southwest Speed
#5
Le Mans Master
Yes, we have the LS2/7 and LS9 versions as well. The core charges are a bit more on those ones, but we're happy to accommodate!
Just PM me and we'll get ya hooked up in plain or whatever finish you need.
Thanks and appreciate the orders and support!
Ivan @ Southwest Speed
Just PM me and we'll get ya hooked up in plain or whatever finish you need.
Thanks and appreciate the orders and support!
Ivan @ Southwest Speed
#6
Former Vendor
Thread Starter
Yo! I did get a PM from another fella asking about the LS2/7's.
I'll answer it here publicly for those wanting to know as well.
We can do both the 2 and 7 but with the refundable core charge of $400, some folks are opting to take it off and send it to us first. That way they aren't charged the core deposit. Of course this could cause a downtime for some so we can also send them out for the $550 shipped and then you would get the $400 back after we receive your core.
Appreciate all the support and remember, we also paint to match for only $45 more!
Ivan @ Southwest Speed
I'll answer it here publicly for those wanting to know as well.
We can do both the 2 and 7 but with the refundable core charge of $400, some folks are opting to take it off and send it to us first. That way they aren't charged the core deposit. Of course this could cause a downtime for some so we can also send them out for the $550 shipped and then you would get the $400 back after we receive your core.
Appreciate all the support and remember, we also paint to match for only $45 more!
Ivan @ Southwest Speed
#7
Le Mans Master
Yo! I did get a PM from another fella asking about the LS2/7's.
I'll answer it here publicly for those wanting to know as well.
We can do both the 2 and 7 but with the refundable core charge of $400, some folks are opting to take it off and send it to us first. That way they aren't charged the core deposit. Of course this could cause a downtime for some so we can also send them out for the $550 shipped and then you would get the $400 back after we receive your core.
Appreciate all the support and remember, we also paint to match for only $45 more!
Ivan @ Southwest Speed
I'll answer it here publicly for those wanting to know as well.
We can do both the 2 and 7 but with the refundable core charge of $400, some folks are opting to take it off and send it to us first. That way they aren't charged the core deposit. Of course this could cause a downtime for some so we can also send them out for the $550 shipped and then you would get the $400 back after we receive your core.
Appreciate all the support and remember, we also paint to match for only $45 more!
Ivan @ Southwest Speed
#8
Former Vendor
Thread Starter
Depends. Most of what I'm set up for would be GM factory colors. What you thinking??
Just got another shipment in of Throttle Bodies. We have in stock ready to ship LS3 versions which almost never happens so if anybody wants in, get in!
Painted and Unpainted!
Thanks CF for all the support!
Ivan
Just got another shipment in of Throttle Bodies. We have in stock ready to ship LS3 versions which almost never happens so if anybody wants in, get in!
Painted and Unpainted!
Thanks CF for all the support!
Ivan
#10
Former Vendor
Thread Starter
Unfortunately I prolly wouldn't on something as small as the TB. Wouldn't really get the effect of a candy and would prolly end up costing somewhere around $160. For materials alone. Now if there was a couple of ya that wanted CAR, then sure, I'll do it for ya. At least that way it would be more cost and time effective for y'all.
Now, I can rock Crystal Red Tintcoat or Red Jewel Tintcoat all day for ya.
Ivan @ Southwest Speed
Now, I can rock Crystal Red Tintcoat or Red Jewel Tintcoat all day for ya.
Ivan @ Southwest Speed
#12
Former Vendor
Thread Starter
#14
Melting Slicks
Yo! I did get a PM from another fella asking about the LS2/7's.
I'll answer it here publicly for those wanting to know as well.
We can do both the 2 and 7 but with the refundable core charge of $400, some folks are opting to take it off and send it to us first. That way they aren't charged the core deposit. Of course this could cause a downtime for some so we can also send them out for the $550 shipped and then you would get the $400 back after we receive your core.
Appreciate all the support and remember, we also paint to match for only $45 more!
Ivan @ Southwest Speed
I'll answer it here publicly for those wanting to know as well.
We can do both the 2 and 7 but with the refundable core charge of $400, some folks are opting to take it off and send it to us first. That way they aren't charged the core deposit. Of course this could cause a downtime for some so we can also send them out for the $550 shipped and then you would get the $400 back after we receive your core.
Appreciate all the support and remember, we also paint to match for only $45 more!
Ivan @ Southwest Speed
#15
Former Vendor
Thread Starter
The $142 unit you're most likely mentioning on fleabay is the #12605109 (gold throttle body blade). While it will "work" on a LS7, it's not the same as the LS3 TB's in their operation. It's internal limits are set differently. Some folks actually replace the 3's with 7's saying that they "respond" better....jury still out on that imho.
The LS2 and 7 however are one in the same and use part number #1250790 (silver blades used on these).
I've actually ordered "LS7" throttle bodies on fleabay and received part #12605109 so just make sure you can confirm which one you are getting when/if you ever go that route.
With that being said, if somebody wants a 2/7 and has the same in the core return, the deposit is a little more since it costs a little more than the LS3 units.
Currently the cheapest I've found a genuine 2/7 is here. Perhaps when folks wanna do a 2/7 we can figure out a core charge that works well for everybody.
Our goal with the core charge is merely to cover replacing the TB when/if one is ever lost or damaged in shipping so that we can continue to serve our end users by being in stock. Believe me it happens more often than you might think. Unfortunately.
Hope that helps additionally and again, always here to serve and make life a little more fun for those who choose to.
Thanks for all the support CF!!
Ivan @ Southwest Speed
Last edited by Southwest Speed; 02-06-2013 at 12:47 AM.
#16
Former Vendor
Thread Starter
Thanks for all the orders on these awesome items!! Not a single person has taken us up on the "money back if you aren't happy with it" in the last 3 years.
Isn't it time you get one for yourself???
Appreciate all the support and interest in these.
Ivan @ Southwest Speed
Isn't it time you get one for yourself???
Appreciate all the support and interest in these.
Ivan @ Southwest Speed
#17
Drifting
So here's the skinny.
The $142 unit you're most likely mentioning on fleabay is the #12605109 (gold throttle body blade). While it will "work" on a LS7, it's not the same as the LS3 TB's in their operation. It's internal limits are set differently. Some folks actually replace the 3's with 7's saying that they "respond" better....jury still out on that imho.
The LS2 and 7 however are one in the same and use part number #1250790 (silver blades used on these).
I've actually ordered "LS7" throttle bodies on fleabay and received part #12605109 so just make sure you can confirm which one you are getting when/if you ever go that route.
With that being said, if somebody wants a 2/7 and has the same in the core return, the deposit is a little more since it costs a little more than the LS3 units.
Currently the cheapest I've found a genuine 2/7 is here. Perhaps when folks wanna do a 2/7 we can figure out a core charge that works well for everybody.
Our goal with the core charge is merely to cover replacing the TB when/if one is ever lost or damaged in shipping so that we can continue to serve our end users by being in stock. Believe me it happens more often than you might think. Unfortunately.
Hope that helps additionally and again, always here to serve and make life a little more fun for those who choose to.
Thanks for all the support CF!!
Ivan @ Southwest Speed
The $142 unit you're most likely mentioning on fleabay is the #12605109 (gold throttle body blade). While it will "work" on a LS7, it's not the same as the LS3 TB's in their operation. It's internal limits are set differently. Some folks actually replace the 3's with 7's saying that they "respond" better....jury still out on that imho.
The LS2 and 7 however are one in the same and use part number #1250790 (silver blades used on these).
I've actually ordered "LS7" throttle bodies on fleabay and received part #12605109 so just make sure you can confirm which one you are getting when/if you ever go that route.
With that being said, if somebody wants a 2/7 and has the same in the core return, the deposit is a little more since it costs a little more than the LS3 units.
Currently the cheapest I've found a genuine 2/7 is here. Perhaps when folks wanna do a 2/7 we can figure out a core charge that works well for everybody.
Our goal with the core charge is merely to cover replacing the TB when/if one is ever lost or damaged in shipping so that we can continue to serve our end users by being in stock. Believe me it happens more often than you might think. Unfortunately.
Hope that helps additionally and again, always here to serve and make life a little more fun for those who choose to.
Thanks for all the support CF!!
Ivan @ Southwest Speed
#18
Former Vendor
Thread Starter
With that being said, if somebody wants a 2/7 and has the same in the core return, the deposit is a little more since it costs a little more than the LS3 units.
Currently the cheapest I've found a genuine 2/7 is here. Perhaps when folks wanna do a 2/7 we can figure out a core charge that works well for everybody.
Currently the cheapest I've found a genuine 2/7 is here. Perhaps when folks wanna do a 2/7 we can figure out a core charge that works well for everybody.
Appreciate all the orders on these CF. Esp the painted ones. We try to make it wicked easy by only charging an additional $40 for it. Crazy awesome deal.
Thank you guys and gals for keepin the light on for us.
Ivan @ Southwest Speed
#20
Former Vendor
Thread Starter
Absolutely! PM Sent and again, thank you for the business!
Appreciate all the weekend orders folks. We have more rolling in slowly and they're being sold almost as fast as we can get them so that's awesome! Moving them out fast and the painted versions are really a great deal for those wanting to get that custom look under the hood.
I can't say how awesome it is to see them installed!
Thanks guys and gals!
Ivan @ Southwest Speed
Appreciate all the weekend orders folks. We have more rolling in slowly and they're being sold almost as fast as we can get them so that's awesome! Moving them out fast and the painted versions are really a great deal for those wanting to get that custom look under the hood.
I can't say how awesome it is to see them installed!
Thanks guys and gals!
Ivan @ Southwest Speed