LS7 New Aluminum Flywheel and OEM Clutch
#1
Racer
Thread Starter
LS7 New Aluminum Flywheel and OEM Clutch
I have an aluminum LS7 flywheel that is brand new in the box and a take out LS7 clutch assembly with 1,200 miles on it. The clutch is in great shape and was removed when some mods were installed to go with a twin disc. Car was bone stock the entire time the clutch was in it.
This is a great clutch setup for cars making anything under about 450-500rwhp. It retains stock driveability and pedal pressure while holding a lot more power.
The flywheel goes for $450 (or more) from a vendor and a new clutch is $250. I'd like $460 for everything.
This is a great clutch setup for cars making anything under about 450-500rwhp. It retains stock driveability and pedal pressure while holding a lot more power.
The flywheel goes for $450 (or more) from a vendor and a new clutch is $250. I'd like $460 for everything.
Last edited by drewkeen; 03-05-2013 at 06:36 PM.
#6
Racer
Thread Starter
Sorry, that was a typo. The first LS3 should have been LS2.
"It will fit the LS2 or LS3 flywheel" is what that should have said. It will fit the LS2 flywheel.
Also, I tried to send over a PM but your box is full
"It will fit the LS2 or LS3 flywheel" is what that should have said. It will fit the LS2 flywheel.
Also, I tried to send over a PM but your box is full
#7
Burning Brakes
Member Since: Aug 2010
Location: San Antonio Texas
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
ok thanks. i emptied out my box should work now..
My clutch went out a couple days ago and is in the shop. I know i need the clutch for sure not sure about the fly wheel. it should be good.
i did find it for 489 here. is this what your selling?
http://www.tickperformance.com/gm-ls...-applications/
My clutch went out a couple days ago and is in the shop. I know i need the clutch for sure not sure about the fly wheel. it should be good.
i did find it for 489 here. is this what your selling?
http://www.tickperformance.com/gm-ls...-applications/
#8
Racer
Thread Starter
That is similar with the exception being that I have an aluminum flywheel and not a steel one. The aluminum verison there goes for $589.99.
The stock LS7 clutch is somewhere in the 60-70lbs range with the steel flywheel. The aluminum flywheel allows you to keep the weight around what the stock clutch in your car weighed or possibly a bit lighter. If you don't mind the extra weight then your stock flywheel should be fine (If it is in good usable shape of course)
The stock LS7 clutch is somewhere in the 60-70lbs range with the steel flywheel. The aluminum flywheel allows you to keep the weight around what the stock clutch in your car weighed or possibly a bit lighter. If you don't mind the extra weight then your stock flywheel should be fine (If it is in good usable shape of course)