FS Z06 rear magnesium alloy cradle and suspension
02-17-2013, 01:55 PM
#6
Drifting
Thread Starter
Not sure there is any advantage.
Design is the same as a standard C6.
Lower control arms & hubs are the same.
Upper control arms are the same except for the mounting bushings.
Sway bar and rear spring will fit a standard C6 but you need to upgrade the front spring and bar or you will have a very evil handling, oversteering car!
Design is the same as a standard C6.
Lower control arms & hubs are the same.
Upper control arms are the same except for the mounting bushings.
Sway bar and rear spring will fit a standard C6 but you need to upgrade the front spring and bar or you will have a very evil handling, oversteering car!
Last edited by wstaab; 02-17-2013 at 02:08 PM.
02-17-2013, 02:06 PM
#7
Drifting
Thread Starter
