SacCityCorvette

Hi Everyone!
C5/C6/ C7 Corvette owners know that the front skid plates are vulnerable to getting bumped and scraped. Fangs from SacCityCorvette provide the best possible protection available for your front skid Plates/Lower Radiator support on your C5/C6 / C7 Corvette. Made of a High Impact Superior Performance Plastic, the C5/C6/ C7 Fangs are extremely impact resistant and 6 times more abrasion resistant than steel and Installation only takes a few minutes. Being only 1/8" thick you will not even notice any clearance loss. There is NO drilling or modification required! C5 Fangs are a simple 10 minute bolt on using your factory bolts.C6, you simply glue them on or if you prefer, they can be screwed if you order the screw on kit. It comes with drill bit and tapping screws. Once the Fangs are installed you will have the best protection available. $49.99 is a very small price to pay for such good protection of such an expensive part of your Vette!
(Note: we still have the screw on C6 Fangs for those who prefer them. Check our website)

1) They are only 1/8” thick so there is no noticeable ground clearance loss. That’s very important since there is not much clearance there to begin with!

2)The superior performance plastic we use is 6 times more abrasion resistant than steel making them slide very smoothly over what ever they come into contact with.

3)They perform perfectly in hot or cold weather.

4) They distribute the load over the entire skid plate where it is the strongest and can evenly distributes the impact, not on one side or the other where the side load can bend skid plate.

5)There are no moving parts to wear out.

6)They only weigh 5oz for those that worry about weight.

7)There is no drilling or modification needed to install them

8)The Fangs give protection over the entire skid plate. So if you bump up on a parking block like we demonstrate in our video you are protected from the front to back and from the highest point of the skid plate to the lowest.

9)They look like something that came on your Vette from the factory.

Here is a video of the Fangs getting used!
http://www.saccitycorvette.com/See-t...n-Action-.html

Here is info for the C5 Fangs
http://www.saccitycorvette.com/Fangs.html

Info for the C6 Fangs (Note: we still have the Screw on C6 Fangs for those who prefer them. Check our website)
http://www.saccitycorvette.com/C6-Fangs.html

Info for the C7 Fangs $66.95
http://www.saccitycorvette.com/C7Fangs.html

C6 Glue Fangs


C6 Screw On Fangs


Fangs will help prevent this from happening.


No gluing for the C5 Fangs. They bolt on with factory bolts.

SacCityCorvette

Have you looked at your skid plates lately?

mophead

Every Corvette should have these installed. Had them on my C5 and now C6 and they work.

Good product from good vendor!

SacCityCorvette

Thank you mophead!

Christian

SacCityCorvette

Had a customer tell me that Fangs are "preventive maintenance". Thats a good way to put it. He said it as in changing your oil before you spin a rod bearing.
To Protect your lower radiator support before its gets beat up and broken.

Thanks
Matt

SacCityCorvette

We offer many more of the top name brand products then we have advertised on the forum and our website. Email or pm us with what your looking for and we will be glad to get back to you with quotes and do our best to save you $$$.

Thanks,
Matthew

SacCityCorvette

In stock ready to ship

r6vette

No white fangs for c6? I liked the look of white fangs on the black c5 i used to have.

SacCityCorvette

We do have them. Just order the black Fangs and make a note when checking out that you would like white Fangs instead. Send us a email also.

Thanks
Christian

SacCityCorvette

The C6 lower radiator support is aluminum so its especially fragile.

SacCityCorvette

The first generation Corvette was introduced late in the 1953 model year. Originally designed as a show car for the 1953 Motorama display at the New York Auto Show, it generated enough interest to induce GM to make a production version to sell to the public. First production was on June 30, 1953.

SacCityCorvette

Whether your a Pro or a Do Your Own Repair kind of guy, here is a simple but very effective tool to help you make
easy work of installing your LS1-2-3-6-7-9 Timing and Rear Main cover and seals.
The AlignIt tool gets the timing & rear main covers centered perfectly with the crank and installs the seal in seconds! Check out the videos.
Having the seal centered accurately with the crank minimizes the chance of seal leakage.

Timing Cover AlignIt Only $26.95
Rear Main AlignIt Only $37.95
Hub simulator only $23.95
Buy more than one of the AlignIt Tools and save!

http://www.saccitycorvette.com/Timin...nmenttool.html

SacCityCorvette

Fangs from SacCityCorvette provide the best possible protection available for your front skid Plates/Lower Radiator support on your C5/C6 Corvette.

ROD BROWN

I have a 2009 base model Vette and I don't have the parts installed on my Vette.There isn't anything in the front of my car where I can install these parts.When I look under my car I can see the cradle but there isn't any other parts that resemble the parts to install the fangs. Is this a goof up by Chevrolet? Rod

SacCityCorvette

Hi Rod,
So your saying your C6 Vette doesn't have the bars under the front like shown in the pictures above??

Christian

ROD BROWN

I found them.On my car ,the bars aren't exposed that much. i would gues about 3" is all that is exposed. It looks like it will be a real chore to install the ties to hold the fangs in place. I was surprised on how little of the fangs on my car are exposed.I don't know if this is normal or there is a problem with my car.Actually only the curve is exposed. Rod

SacCityCorvette

Sounds about right, Rod. They don't stick out far. But they do hit if your not real careful.
We have Screw on Fang if you don't mind drilling 4 small holes?
Here is a link to our Thanksgiving sale. It has Glue On or Screw On your choice and save a few $$.
http://www.saccitycorvette.com/Thank...gSale2014.html

Thank you,
Christian

SacCityCorvette

SAME DAY SHIPPING!!!

SacCityCorvette

Fangs from SacCityCorvette provide the best possible protection available for your front skid Plates/Lower Radiator support on your C5/C6/C7 Corvette.

EBuckC6

Two questions for you. One, have there been any issues with the adhesive/glue not holding the guards over time, getting weaker? Two, are there any modifications needed when using these with a spliter, its a C6 base?

Thanks