FS: HKE Built LS7 longblock/complete engine
12-19-2013, 05:16 AM
#1
FS: Brand new HKE Built LS7 longblock/complete engine
Due to to some pretty unfortunate circumstances I am listing my brand new, HKE Ls7 for sale. This is still at HKE waiting on a camshaft to be spec'd(new owner can pick the cam with Erik), and then finished up. Brand new, 0 miles and will ship direct from HKE. It is paid in full, as is shipping. If you are local you will be more than welcome to pick it up in person.
Here are the details:
GM Ls7 Block(427cid)
Scat rods
Weisco pistons(11.6:1 compression)
Callies compstar crank(wetsump)
ARP Rod Bolts
PRC 285cc heads with upgraded titanium valves and double springs
MLS head gaskets
ARP Heads Bolts
melling high volume pump
ls7 rockers with COMP trunion upgrade
HKE push rods
new ls7 trays
new ls7 lifters
Ls2 timing cover and sensor
custom HKE comp camshaft(Has not been spec'd yet)
RPM Ported Ls7 intake manifold with MAP sensor
Ls9 Injectors
OEM rails
LS1 oil pan
Red Valve covers
Coil packs
The cam has not been spec'd yet, however it has been paid for. You would have the ability to choose this to your liking.
I also have everything needed to make this a turnkey engine if you want to go that route, and it is something we can discuss.
I am looking for $12,000 shipped for the complete engine, but am open to reasonable offers. Worst I can say is no, so feel free to offer.
PM with questions, to make offers or for contact info. I will gladly provide references, and you are more than welcome to get in touch with HKE and verify everything.
Dave-
Here are the details:
GM Ls7 Block(427cid)
Scat rods
Weisco pistons(11.6:1 compression)
Callies compstar crank(wetsump)
ARP Rod Bolts
PRC 285cc heads with upgraded titanium valves and double springs
MLS head gaskets
ARP Heads Bolts
melling high volume pump
ls7 rockers with COMP trunion upgrade
HKE push rods
new ls7 trays
new ls7 lifters
Ls2 timing cover and sensor
custom HKE comp camshaft(Has not been spec'd yet)
RPM Ported Ls7 intake manifold with MAP sensor
Ls9 Injectors
OEM rails
LS1 oil pan
Red Valve covers
Coil packs
The cam has not been spec'd yet, however it has been paid for. You would have the ability to choose this to your liking.
I also have everything needed to make this a turnkey engine if you want to go that route, and it is something we can discuss.
I am looking for $12,000 shipped for the complete engine, but am open to reasonable offers. Worst I can say is no, so feel free to offer.
PM with questions, to make offers or for contact info. I will gladly provide references, and you are more than welcome to get in touch with HKE and verify everything.
Dave-
Last edited by Spec C; 12-20-2013 at 01:01 PM.
12-20-2013, 07:01 AM
#4
It's built for wetsump.
Definitely open to offers. I'm pretty reasonable and realize I'm going to take a bit of a loss.
I also have an RPM ported ls7 intake manifold, ls9 injectors, OEM or rsi billet fuel rails, and coil packs to make this complete.
Definitely open to offers. I'm pretty reasonable and realize I'm going to take a bit of a loss.
I also have an RPM ported ls7 intake manifold, ls9 injectors, OEM or rsi billet fuel rails, and coil packs to make this complete.
