**NEW** C6 LED Fog Light Kit- Plug N Play- Brighter than HID!
#41
#42
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
Lows- There is no led bulb available. We normally carry HID replacements for the lows, but I am currently out of all temps except 8000k which is really blue. 6000k is a good match to these fogs. We expect more in late this month.
When those arrive we'll offer the fogs with an option to purchase the matching lows at a reduced cost. I am not 100% sure what that will be yet. I'd say $15-$20 less than retail.
Highs- This is a new product. We are out but expect more later this month. You can add yourself to the wait list at the order link. You will be emailed when they arrive. http://www.jwmotorsportsllc.com/C6-C...bs-_p_157.html
Check out our new reverse kit as well http://www.jwmotorsportsllc.com/C6-C...bs-_p_156.html
#43
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
Customer Install
Halogens don't stand a chance. HIDS are bright, but no match for these JWM LEDS!
Just got the new LED fogs today, took a few pics with my cellphone of the lights.
New Led fog on left, 35w 4300k HID on right
New Led fog on left, 35w 4300k HID on right
New LED fog on left, factory fog on right
New LED fog on left, factory fog on right
Both new LED
Both new LED
New Led fog on left, 35w 4300k HID on right
New Led fog on left, 35w 4300k HID on right
New LED fog on left, factory fog on right
New LED fog on left, factory fog on right
Both new LED
Both new LED
Halogens don't stand a chance. HIDS are bright, but no match for these JWM LEDS!
#46
Advanced
Great Fog Lights
Received my lights yesterday and installed today. I was running 6k HID's and very happy that I switched to these JW Motoring LED Fog lights! The light output is very crisp and much better then my old HID's, highly recommend these from JW Motoring. Attached are some pix.
JW Motoring Passenger Side(Left) 6k HID Drivers Side(Right)
JW Motoring Passenger Side(Left) 6k HID Drivers Side(Right)
JW Motoring On Both Sides
JW Motoring Fogs Only
JW Motoring Fogs Only
JW Motoring With Fogs And Headlights On
JW Motoring Passenger Side(Left) 6k HID Drivers Side(Right)
JW Motoring Passenger Side(Left) 6k HID Drivers Side(Right)
JW Motoring On Both Sides
JW Motoring Fogs Only
JW Motoring Fogs Only
JW Motoring With Fogs And Headlights On
Last edited by Boomer013; 11-08-2014 at 08:35 PM.
#48
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
The reviews are coming in. I appreciate you guys taking the time out of your day to take pics with a review.
Received my lights yesterday and installed today. I was running 6k HID's and very happy that I switched to these JW Motoring LED Fog lights! The light output is very crisp and much better then my old HID's, highly recommend these from JW Motoring. Attached are some pix.
JW Motoring Passenger Side(Left) 6k HID Drivers Side(Right)
JW Motoring Passenger Side(Left) 6k HID Drivers Side(Right)
JW Motoring On Both Sides
JW Motoring Fogs Only
JW Motoring Fogs Only
JW Motoring With Fogs And Headlights On
JW Motoring Passenger Side(Left) 6k HID Drivers Side(Right)
JW Motoring Passenger Side(Left) 6k HID Drivers Side(Right)
JW Motoring On Both Sides
JW Motoring Fogs Only
JW Motoring Fogs Only
JW Motoring With Fogs And Headlights On
#54
Le Mans Master
Got a set of Fogs and High Beams. I had a set of switchback CREE DRL and was VERY happy with them so I had high expectations for these. I was not disappointed.
Unlike the generic set of CREE DRL I purchased before, these are plug and play and mount just like the OEM bulbs. No jury-rigging necessary.
The directions supplied are super, except that one was printed in color and the other black and white and references to "Red" in pictures are not helpful with black & white print outs. The High beams are a peice of cake to install. I just jacked up the car and did not have to remove the wheels. The fogs are a bit more work, but not much. Just don't loose those plastic clip things. I tried to go through the brake vents under the front bumper but it is too hard to get a torx on those hold downs, and you really do not need visibility to them to loosen and tighten them.
No pictures posted, since so many other have. Color of these bulbs are MUCH better than the OEM bulbs. The lights now match very nicely the OEM HIDs.
Hopefully, the bulbs will last the life of the car like I expect CREE bulbs to, and there will be no heat issues that eventually crop up.
Very pleased so far.
Unlike the generic set of CREE DRL I purchased before, these are plug and play and mount just like the OEM bulbs. No jury-rigging necessary.
The directions supplied are super, except that one was printed in color and the other black and white and references to "Red" in pictures are not helpful with black & white print outs. The High beams are a peice of cake to install. I just jacked up the car and did not have to remove the wheels. The fogs are a bit more work, but not much. Just don't loose those plastic clip things. I tried to go through the brake vents under the front bumper but it is too hard to get a torx on those hold downs, and you really do not need visibility to them to loosen and tighten them.
No pictures posted, since so many other have. Color of these bulbs are MUCH better than the OEM bulbs. The lights now match very nicely the OEM HIDs.
Hopefully, the bulbs will last the life of the car like I expect CREE bulbs to, and there will be no heat issues that eventually crop up.
Very pleased so far.
#55
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
Got a set of Fogs and High Beams. I had a set of switchback CREE DRL and was VERY happy with them so I had high expectations for these. I was not disappointed.
Unlike the generic set of CREE DRL I purchased before, these are plug and play and mount just like the OEM bulbs. No jury-rigging necessary.
The directions supplied are super, except that one was printed in color and the other black and white and references to "Red" in pictures are not helpful with black & white print outs. The High beams are a peice of cake to install. I just jacked up the car and did not have to remove the wheels. The fogs are a bit more work, but not much. Just don't loose those plastic clip things. I tried to go through the brake vents under the front bumper but it is too hard to get a torx on those hold downs, and you really do not need visibility to them to loosen and tighten them.
No pictures posted, since so many other have. Color of these bulbs are MUCH better than the OEM bulbs. The lights now match very nicely the OEM HIDs.
Hopefully, the bulbs will last the life of the car like I expect CREE bulbs to, and there will be no heat issues that eventually crop up.
Very pleased so far.
Unlike the generic set of CREE DRL I purchased before, these are plug and play and mount just like the OEM bulbs. No jury-rigging necessary.
The directions supplied are super, except that one was printed in color and the other black and white and references to "Red" in pictures are not helpful with black & white print outs. The High beams are a peice of cake to install. I just jacked up the car and did not have to remove the wheels. The fogs are a bit more work, but not much. Just don't loose those plastic clip things. I tried to go through the brake vents under the front bumper but it is too hard to get a torx on those hold downs, and you really do not need visibility to them to loosen and tighten them.
No pictures posted, since so many other have. Color of these bulbs are MUCH better than the OEM bulbs. The lights now match very nicely the OEM HIDs.
Hopefully, the bulbs will last the life of the car like I expect CREE bulbs to, and there will be no heat issues that eventually crop up.
Very pleased so far.
Sorry for the issue, glad you got it fixed and are enjoying them.
#58
These look like a win - win, but the big question is of course, durability.. I suppose even if the life span is relatively short (I am referring to the entire assembly, not just the bulbs themselves - just like in a HID kit, if the ballast dies, having a good bulb is useless), since these are fogs, and not typically used very much, might offset a shorter life span.. Feedback?
#59
Banned Scam/Spammer
Thread Starter
Member Since: Feb 2007
Location: Oklahoma City
Posts: 50,094
Received 265 Likes
on
253 Posts
St. Jude Donor '09-'10-'11-'12-'13-'14-'15-'16-'17,'19,'22
These look like a win - win, but the big question is of course, durability.. I suppose even if the life span is relatively short (I am referring to the entire assembly, not just the bulbs themselves - just like in a HID kit, if the ballast dies, having a good bulb is useless), since these are fogs, and not typically used very much, might offset a shorter life span.. Feedback?