Front Grille Mounted Brake Cooling Ducts
#1
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
Front Grille Mounted Brake Cooling Ducts
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
Last edited by Xplosive Performance; 05-18-2015 at 11:15 AM.
#2
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#3
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#4
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#5
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
#6
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#7
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#8
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#9
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#10
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#11
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
#12
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#13
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
This image has been resized. Click this bar to view the full image. The original image is sized 4159x2339.
WE RACE WHAT WE SELL
#14
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
05-13 Corvette C6/ZO6/GS/ZR1 Front Grille Mounted Brake Cooling Duct
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
#15
Former Vendor
Thread Starter
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes
on
28 Posts
St. Jude Donor '13
XP Motorsports 05-13 Corvette C6/ZO6/ZR1 Front Grille Mounted Brake Cooling Duct System
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html
Everything you need to install grille mounted brake cooling in your C6 Corvette. The ducts fit behind the front grille no need to lose your fog lights. The ducts mount on the inner grille support (triming of the support is required). For ease of installation removal of the front bumper is required.
Kit Includes
(2) Large Brake Duct Vents
(2) Spindle Mount Brake Hose Adapters
(2) 3" Hose Clamps
(10Ft) High Temperature 550 degree Silicon Brake Hose
Mounting Screws and pop rivets
Instruction.
http://www.xplosiveperformance.com/0...ct_p_3389.html