0matt@510

Up for sale are a pair of OE Replica Wheels (C5Z06 Black Wheels with a machined face and lip). These Wheels are 9.5 inches wide and wrapped in Hoosier Slicks. The specs on the slicks are

Tire Size: 28 x 10.00-17
Wheel Diameter: 17 in.
Sidewall Style: Solid white letters
Tire Construction: Bias-ply
Tire Diameter: 28.00 in.
Section Width: 11.30 in.
Tread Width: 9.50 in.
Minimum Recommended Wheel Width: 8.00 in.
Maximum Recommended Wheel Width: 10.00 in.

The Wheel and Tires may have about 50-75 miles on them and about 10 passes. The tires have more than half of the thread left. These Wheels will work on C5s C6s and C6Z and Grandsports. The wide body's require Hubcentric Wheel Spacers to make them look normal which I will Include to anyone that needs them for the wide bodies.

I am doing the 15inch wheel conversion so won't have use for these anymore. The Wheels and Tires cost 723.94 before mounting and balancing. I'll let them go for $450.00 and $500.00 including the Spacers. These wheels and tires made 345 Nitto NT05Rs and 345 Mickey Thompson ET Streets seem like run flats on my car when it came to traction.










Here's a little test hit in Mexico on 15lbs of boost and a little 50 shot of Nitrous (950rwhp Tune up through an auto). The road was pretty bumpy which hoped me over into the other lane and also got a little squirly around 165-170mph when you see brake lights. Same shot and tune I can't even consider doing a 50-60 roll without going 3 lanes wide on 345 drag radials. These little slicks do work but it's time for some more sidewall.


Willing to ship at buyer's expense. Thanks!


-Matt-

Kouasupra

Gesh.. Smoked that other car far. If you local I would pick up already. Good luck with the sale.

0matt@510

Thanks! The car that was filming was a bolt on 2013 5.0 GT Mustang on a 100 shot. Around 520rwhp lol.

c5wolf

Will these fit over z06 brakes?

Spying Beast

Sorry for my ignorance, but will these fit a Z51 break size with a wide body kit?

Keith

TX Z06 02

PM Sent.

0matt@510

Yes with the spacers needed for the wide bodies there is tons of room at the brakes. My car has OEM C6Z06 brakes and there are no fitment issues.

Joe Spinners

by any chance are these still available?

12centenial

Damn! If you were in florida I would buy these...GLWS

chrisp250r

I have this exact setup on my 06 and he's not joking about the traction! These things HOOOOOOK!!!!! I went from 325/40/18 m&h race masters to these and man what a difference, i can launch my car at 6000 with no wheelspin

paisa427

Hi Matt, i currently have the exact rim(oem c5z 17x9.5) and tire combo. Do you still have the Hub-centric wheel adapters? if not could you point me in the right direction on where you got yours and the specs need, and what type of lugnuts to use.
Thanks.

Spying Beast

Hey man, if you've still got the tires and spacers, I'll take them. Please PM me with the Paypal payment details and I'll get you some $.

I'd need them shipped to S. California to a commercial address. They'll load them into one of my containers and save a small fortune in freight costs across the pond.

Thanks, I hope to hear from you soon.

Keith

808-Three Three 0- Four 6 5 Two in case you don't hear from me after a couple days. My memory is about as long as my