Black Friday Special on all Vacuum Infused Carbon Fiber Spoilers / Side Skirts
#1
Former Vendor
Thread Starter
Black Friday Special on all Vacuum Infused Carbon Fiber Spoilers / Side Skirts
Vacuum resin infusion is a sophisticated technique for manufacturing high performance, void free composites even on large or complicated moulds. The process is ideally suited to the manufacture of carbon fiber composites and is widely used by professional manufacturers in the aerospace and formula 1 industry for the production of carbon fiber body panels and by marine manufacturers for the production of boat hulls. In resin infusion, reinforcement is laid into the mould ‘dry’, i.e. without any resin, and then enclosed in a specially configured stack of bagging materials (such as peel ply, infusion mesh, bagging film, etc) before being subjected to vacuum pressure using a composites vacuum pump. Once all the air has been removed from the bag and the reinforcement has been fully compressed under this pressure, liquid epoxy resin (mixed with hardener) is introduced to the reinforcement through a pipe which then infuses through the reinforcement under the vacuum pressure. Once the resin has fully infused through the reinforcement, the supply of resin is cut off (using a pipe clamp) and the resin is left to cure, still under vacuum pressure.
All our vacuum infused products are made with 12K-670gsm 2x2 twill. What does 12K mean.? It means that each tow or yarn is composed of 12,000 individual carbon filaments which boasts the highest ultimate tensile strength in the industry.!! vs. the widely used 3K-2x2 twill which is composed of 3,000 carbon filaments.
This is by far the best looking carbon fiber I have ever seen.!!
Vacuum infused items offered for both GS/Zo6/Zr1 and base models.!
We have the Zr1 front splitters listed @ $599 shipped and the side skirts w/ flaps @ $699 shipped.
Both as kit is listed @ $1149 shipped.
Side Skirts available both in OEM size and 1" Extended versions.
Front splitters mount with original screws, skirts come with 3/16 aluminum tri-fold rivets for mounting.
Just Pm orders and email address for fast checkouts.!!!
Black Friday special pricing: Carbon Front splitter - $499 | Side Skirts - $549 (Oem/Extended) | Front spliter side skirts - $899
Fiberglass Front Splitter - $299 | Side Skirts - $324.99 (Oem/Extended) | Front spliter side skirts - $575
Free Shipping
All items include FREE shipping.
*100% Carbn Fiber (Layer to Layer)
*Extremely light weight
*Incredibly flexible
*Unbelievably durable
*Installation instructions
*installation hardware
All our vacuum infused products are made with 12K-670gsm 2x2 twill. What does 12K mean.? It means that each tow or yarn is composed of 12,000 individual carbon filaments which boasts the highest ultimate tensile strength in the industry.!! vs. the widely used 3K-2x2 twill which is composed of 3,000 carbon filaments.
This is by far the best looking carbon fiber I have ever seen.!!
Vacuum infused items offered for both GS/Zo6/Zr1 and base models.!
We have the Zr1 front splitters listed @ $599 shipped and the side skirts w/ flaps @ $699 shipped.
Both as kit is listed @ $1149 shipped.
Side Skirts available both in OEM size and 1" Extended versions.
Front splitters mount with original screws, skirts come with 3/16 aluminum tri-fold rivets for mounting.
Just Pm orders and email address for fast checkouts.!!!
Black Friday special pricing: Carbon Front splitter - $499 | Side Skirts - $549 (Oem/Extended) | Front spliter side skirts - $899
Fiberglass Front Splitter - $299 | Side Skirts - $324.99 (Oem/Extended) | Front spliter side skirts - $575
Free Shipping
All items include FREE shipping.
*100% Carbn Fiber (Layer to Layer)
*Extremely light weight
*Incredibly flexible
*Unbelievably durable
*Installation instructions
*installation hardware
Last edited by CF Kits & Performance; 11-27-2017 at 05:49 PM.
#6
Former Vendor
Thread Starter
#15
Former Vendor
Thread Starter
#17
Former Vendor
Thread Starter
#19
Former Vendor
Thread Starter