FS: 2011 Grandsport Calipers & Rotors
#1
Melting Slicks
Thread Starter
FS: 2011 Z06/Grandsport Calipers & Rotors *** PRICE DROP ***
****SOLD****
Four OEM Z06/Grandsport silver calipers and brake rotors for sale.
Approximately 27k miles. Great condition.
$1,200 + shipping (will only ship signature required ground delivery)
Will now sell 4 calipers only (no rotors) for $1,000 + shipping in continental US.
I have OEM rubber brake lines and used pads available for additional charge. The lines are not originally listed because I assumed that anyone wishing to upgrade their brakes would put braided stainless lines on and the original OEM pads are more than 50% worn.
The sale does not include the original brake pad retaining pins as I used them in my replacement calipers. If you don't have your own pins, I have a complete, brand new set of AC/DELCO Durastop pins (28) that is available for purchase separately for $50 (my cost).
Four OEM Z06/Grandsport silver calipers and brake rotors for sale.
Approximately 27k miles. Great condition.
$1,200 + shipping (will only ship signature required ground delivery)
Will now sell 4 calipers only (no rotors) for $1,000 + shipping in continental US.
I have OEM rubber brake lines and used pads available for additional charge. The lines are not originally listed because I assumed that anyone wishing to upgrade their brakes would put braided stainless lines on and the original OEM pads are more than 50% worn.
The sale does not include the original brake pad retaining pins as I used them in my replacement calipers. If you don't have your own pins, I have a complete, brand new set of AC/DELCO Durastop pins (28) that is available for purchase separately for $50 (my cost).
Last edited by RC4G; 07-29-2016 at 01:28 AM.
#4
Melting Slicks
Thread Starter
Its my understanding that it is a direct bolt-on but that you may need Z06 lines for additional length.
You didn't say if you were sticking with base wheels or not. If you are replacing the wheels to you need to confirm that your wheels have the appropriate offset to clear the calipers. You can use a 1/2" wheel space with stock wheels to get the offset but then you will most likely need longer wheel studs. I'm not a big fan of wheels spacers though.
You didn't say if you were sticking with base wheels or not. If you are replacing the wheels to you need to confirm that your wheels have the appropriate offset to clear the calipers. You can use a 1/2" wheel space with stock wheels to get the offset but then you will most likely need longer wheel studs. I'm not a big fan of wheels spacers though.
#6
Melting Slicks
Thread Starter
Not splitting at this time.
Suggest you buy the whole kit and just sell the front components yourself.
Suggest you buy the whole kit and just sell the front components yourself.
Last edited by RC4G; 06-06-2016 at 02:36 PM.
#7
Its my understanding that it is a direct bolt-on but that you may need Z06 lines for additional length.
You didn't say if you were sticking with base wheels or not. If you are replacing the wheels to you need to confirm that your wheels have the appropriate offset to clear the calipers. You can use a 1/2" wheel space with stock wheels to get the offset but then you will most likely need longer wheel studs. I'm not a big fan of wheels spacers though.
You didn't say if you were sticking with base wheels or not. If you are replacing the wheels to you need to confirm that your wheels have the appropriate offset to clear the calipers. You can use a 1/2" wheel space with stock wheels to get the offset but then you will most likely need longer wheel studs. I'm not a big fan of wheels spacers though.
So ya I'll run braided lines and obviously some crazy wheels.
Thanks for the help
#9
Melting Slicks
Thread Starter
#10
Advanced
Member Since: Jun 2008
Location: Bay Area CA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
#12
sent you a message
#19
Melting Slicks
Thread Starter
Yes, rotors have normal wear grooving from OEM sintered pads but should turn out with no problem.
$150 + shipping for just the rotors. Feel free to get your own shipping costs from 77345.
$150 + shipping for just the rotors. Feel free to get your own shipping costs from 77345.
#20
I'll hold off then - sounds like they are pretty much identical to mine. didnt realize it was such a common thing (this is my first vette).... sounds like i have some reading to do.
thanks.
thanks.