LS3 Comp CamshaftXR275HR-13
09-09-2016, 12:12 PM
#1
Racer
Thread Starter
LS3 Comp CamshaftXR275HR-13
Comp Cam # XR275HR-13, Hydraulic roller tappet.
Shipped TYD $260.00
Single bolt Camshaft, Fits LS2, LS3, LS9. Used for 300 miles, Like new condition.
Purchased this cam for My C6 Auto daily driver, runs great, sounds good, has a good cam lope at ldle and very good power thru the full rpm range. Only drawback was that my wife did not like the higher idle on the automatic transmission. I did not have a stall convertor. Idled at 750 – 800 rpm
This Cam needs to be used on an auto with a stall convertor or a manual trans car.
I ran this cam for 300 miles and then changed to a milder cam with stock idle qualities and less power.
Manufacturer's Part Number: 146-426-11, serial # WS4453-15
Camshaft, Hydraulic Roller Tappet, Advertised Duration 275/287,
Duration at 050 inch Lift: 222 int./234 exh.
Lift .566/.576, 113 LSA. -- Chevy, LSA, LS3, LS9
These COMP Cams XFI hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing, late model GM LS3 rectangular port cylinder heads. They produce a broad powerband and excellent torque, making them great for street performance and drivability. Set your Chevy LS3 apart from the crowd with one of these COMP Cams XFI hydraulic roller camshafts.
Shipped TYD $260.00
Single bolt Camshaft, Fits LS2, LS3, LS9. Used for 300 miles, Like new condition.
Purchased this cam for My C6 Auto daily driver, runs great, sounds good, has a good cam lope at ldle and very good power thru the full rpm range. Only drawback was that my wife did not like the higher idle on the automatic transmission. I did not have a stall convertor. Idled at 750 – 800 rpm
This Cam needs to be used on an auto with a stall convertor or a manual trans car.
I ran this cam for 300 miles and then changed to a milder cam with stock idle qualities and less power.
Manufacturer's Part Number: 146-426-11, serial # WS4453-15
Camshaft, Hydraulic Roller Tappet, Advertised Duration 275/287,
Duration at 050 inch Lift: 222 int./234 exh.
Lift .566/.576, 113 LSA. -- Chevy, LSA, LS3, LS9
These COMP Cams XFI hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing, late model GM LS3 rectangular port cylinder heads. They produce a broad powerband and excellent torque, making them great for street performance and drivability. Set your Chevy LS3 apart from the crowd with one of these COMP Cams XFI hydraulic roller camshafts.
Last edited by C6-13thPilotCar; 09-19-2016 at 03:45 PM. Reason: Price Drop
