FS 279780 JE LS7 F.S.R. Dish Pistons 4.130 bore -22cc
02-15-2017, 07:06 PM
#1
Instructor
Thread Starter
FS 279780 JE LS7 F.S.R. Dish Pistons 4.130 bore -22cc
For Sale:
Pistons are brand new in original box, only opened box to look inside. Changed engine set up so pistons are now for sale. Piston pins and wire locks included. Piston rings are not included.
PRICE DROP $500.00 SHIPPED, This is over $175.00 below WD cost for brand new pistons!!!
Paypal ready,
Text at 805-797-0959
Alex
FSR (Forged Side Relief) slipper forging design accommodates factory stroke and rod length while easily clearing the reluctor wheel. These Heavy-Duty LS7 pistons are designed for extreme levels of Nitrous/Boost (Pin upgrade recommended above 700 HP). CNC-machined ring grooves accept 1.5, 1.5, 3mm rings. (CR calculated with .042 gasket thickness and 0.00" deck clearance). STOCK ROD MUST BE HONED TO ACCEPT .927" DIA PIN. MILLING OF ROD BALANCE PAD MAY BE NEEDED DUE TO VARIATION FROM FACTORY.
Includes:
Pin #927-2250-15-51C (111g)
Wire locks #927-073-MW
Part # 279780
CID: 428
Bore: 4.130
Stroke: 4.00
Rod Length. 6.077
Block Height: 9.240
Comp. Height: 1.163
Head Cubic Centimeters 64cc 66cc 72cc
Compression Ratio 10.1 10.0 9.5
Dome Vol. -22.0cc
Gram Wt. 436
Oversize Recommended Ring Set J60008-4130-0
Pistons are brand new in original box, only opened box to look inside. Changed engine set up so pistons are now for sale. Piston pins and wire locks included. Piston rings are not included.
PRICE DROP $500.00 SHIPPED, This is over $175.00 below WD cost for brand new pistons!!!
Paypal ready,
Text at 805-797-0959
Alex
FSR (Forged Side Relief) slipper forging design accommodates factory stroke and rod length while easily clearing the reluctor wheel. These Heavy-Duty LS7 pistons are designed for extreme levels of Nitrous/Boost (Pin upgrade recommended above 700 HP). CNC-machined ring grooves accept 1.5, 1.5, 3mm rings. (CR calculated with .042 gasket thickness and 0.00" deck clearance). STOCK ROD MUST BE HONED TO ACCEPT .927" DIA PIN. MILLING OF ROD BALANCE PAD MAY BE NEEDED DUE TO VARIATION FROM FACTORY.
Includes:
Pin #927-2250-15-51C (111g)
Wire locks #927-073-MW
Part # 279780
CID: 428
Bore: 4.130
Stroke: 4.00
Rod Length. 6.077
Block Height: 9.240
Comp. Height: 1.163
Head Cubic Centimeters 64cc 66cc 72cc
Compression Ratio 10.1 10.0 9.5
Dome Vol. -22.0cc
Gram Wt. 436
Oversize Recommended Ring Set J60008-4130-0
Last edited by amc51227; 07-10-2017 at 07:43 PM.
