etc fan question
#1
Melting Slicks
Thread Starter
etc fan question
Using hpt, my fans are coming on at start up and not wanting on the ect to warm up. Any way to modify this? I have the low speed fan set for 195 on and 190 off and the high speed set for 220 on and 210 off.
#5
Melting Slicks
Correction..........the 2013's actually have dual fans that are wired in parallel to mimic a single fan.............no need to turn them off and an adjustment after a 160 install is really not necessary either.
#6
Drifting
Member Since: Jan 2005
Location: Tucson Arizona
Posts: 1,827
Received 298 Likes
on
165 Posts
St. Jude Donor '08
Now back to what the OP asked in the beginning.
#7
Melting Slicks
#8
Melting Slicks
Could possibly make adding dual brushless fans easier than having a shorud made.
#15
Melting Slicks
Here are the stock fan settings from a stock 2009 Z06.
ECT °F - Fan Power ECT (%)
192 - 0
196 - 0
199 - 14.99939
203 - 22.999573
207 - 30.999756
210 - 38.999939
214 - 47.000122
217 - 55.999756
221 - 74.000549
225 - 89.900207
228 - 89.900207
232 - 89.900207
235 - 89.900207
239 - 89.900207
243 - 89.900207
246 - 89.900207
250 - 89.900207
ECT °F - Fan Power ECT (%)
192 - 0
196 - 0
199 - 14.99939
203 - 22.999573
207 - 30.999756
210 - 38.999939
214 - 47.000122
217 - 55.999756
221 - 74.000549
225 - 89.900207
228 - 89.900207
232 - 89.900207
235 - 89.900207
239 - 89.900207
243 - 89.900207
246 - 89.900207
250 - 89.900207
#16
Melting Slicks
My apologies! Jim2092 is correct. Sometimes, I don't know why I bother..........I owe you a beer.
However............there isn't an on/off setting for a 2013 car though........just "Fan Desired %".
However............there isn't an on/off setting for a 2013 car though........just "Fan Desired %".