Who is the best remote tuner for Z06?
#1
Racer
Thread Starter
Who is the best remote tuner for Z06?
I am not new to remote tuning, i had an 04 Cobra that i had tuned remotely by a guy named Eric Brooks @ Brookspeed and had a good experience with him. My car ran really well with great drivability and made 640 rwhp. Im thinking about using him again to tune my C6Z cause he does do GM cars with HP Tuners but he is better known for his Ford stuff. Im located in the Pacific Northwest and was wondering if anybody knows somebody in this are that is GOOD at tuning these cars or if not who is the best at tuning remotely? My car is bone stock at the moment but i will be sending the heads down to American Heritage in few weeks to get their #4 service done and a cam and a CAI so i would like to talk to a few people before i pull the trigger on that so i can be ready to go when its all back together.
#3
Former Vendor
Member Since: Nov 2005
Location: Ossining New York
Posts: 11,792
Received 243 Likes
on
183 Posts
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Thank you.
CoW WEBSITE.
AutoCal REMOTE TUNER - The ONLY way to tune remotely.
CoW BOOSTER! - ONLY available here.
Call any time if you have questions.
Thanks!
Chuck CoW
#4
Pro
Member Since: Jan 2014
Location: NEWPORT NEWS VIRGINIA
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
#6
Le Mans Master
Probably one of the best in the U.S. http://www.hitechtuning.com/
#7
Le Mans Master
I've looked at a few sites but never saw pricing. It may be they need to know the job details (car, what you want) before pricing.
I'd sure like SOME idea what this costs too. $100? $1,000?
#8
Team Owner
Matt@FSP
#9
Safety Car
Probably one of the best in the U.S. http://www.hitechtuning.com/
As a close second I would recommend Bret (BlownblueZ06), I am not sure how open he is to doing it these days with how busy he is, but I had him remote tune a 1000whp 364ci YSI build from the ground up a few years back and he did a absolutely amazing job.
#11
Former Vendor
Member Since: Nov 2005
Location: Ossining New York
Posts: 11,792
Received 243 Likes
on
183 Posts
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Hey there Vito.....
Hey there Vito.
Just got your e-mail. No plans for Phoenix any time soon, and YES I can tune it remotely.
The ONLY way you'll get a car with a cam like that tuned right is with my AutoCal w/ serial wideband package.
There is no other way to do it remotely.
The AutoCal is specially modified at Corvettes of Westchester to make use of SERIAL WIDEBAND data from
an Innovate or Tech Edge wideband. While most NA tunes or bolt on cars will tune great without it,
when you're remote tuning a CAMMED or SUPERCHARGED vehicle this is the ONLY way to fly....
Just ask Matt from South Florida.... AutoCal, wideband, Chuck CoW Mail Tune on his HEAD/CAMMED C6 ZO6.
By what you told me in the e-mail I'm assuming you want your car to perform like the C6Z in the above video.
Chuck CoW
Just got your e-mail. No plans for Phoenix any time soon, and YES I can tune it remotely.
The ONLY way you'll get a car with a cam like that tuned right is with my AutoCal w/ serial wideband package.
There is no other way to do it remotely.
The AutoCal is specially modified at Corvettes of Westchester to make use of SERIAL WIDEBAND data from
an Innovate or Tech Edge wideband. While most NA tunes or bolt on cars will tune great without it,
when you're remote tuning a CAMMED or SUPERCHARGED vehicle this is the ONLY way to fly....
Just ask Matt from South Florida.... AutoCal, wideband, Chuck CoW Mail Tune on his HEAD/CAMMED C6 ZO6.
By what you told me in the e-mail I'm assuming you want your car to perform like the C6Z in the above video.
Chuck CoW
#12
Le Mans Master
Probably one of the best in the U.S. http://www.hitechtuning.com/
#13
Pro
Member Since: Jan 2014
Location: NEWPORT NEWS VIRGINIA
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
email him he will respond... he is no joke here is a link he is known.
https://www.corvetteforum.com/forums...-see-this.html
https://www.corvetteforum.com/forums...-see-this.html
#14
Former Vendor
Member Since: Nov 2005
Location: Ossining New York
Posts: 11,792
Received 243 Likes
on
183 Posts
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
No other tool....
I am not new to remote tuning, i had an 04 Cobra that i had tuned remotely by a guy named Eric Brooks @ Brookspeed and had a good experience with him. My car ran really well with great drivability and made 640 rwhp. Im thinking about using him again to tune my C6Z cause he does do GM cars with HP Tuners but he is better known for his Ford stuff. Im located in the Pacific Northwest and was wondering if anybody knows somebody in this are that is GOOD at tuning these cars or if not who is the best at tuning remotely? My car is bone stock at the moment but i will be sending the heads down to American Heritage in few weeks to get their #4 service done and a cam and a CAI so i would like to talk to a few people before i pull the trigger on that so i can be ready to go when its all back together.
Late Mustangs have widebands built in from the factory and WOT tuning is much easier.
Sadly VETTES don't yet have wideband built in, so I modify my AutoCals to support the popular serial widebands like
innovate and tech Edge. No other way to do it.... unless you spend tripple on hardware and then you just do the tuning yourself.
Trust me, 170 MPH at Daytona for 2 years running.....
You'll be good.
Chuck CoW
#15
Hey Boss. No other tool gives you SERIAL WIDEBAND SUPPORT for the ultimate in AFR ACCURACY.
Late Mustangs have widebands built in from the factory and WOT tuning is much easier.
Sadly VETTES don't yet have wideband built in, so I modify my AutoCals to support the popular serial widebands like
innovate and tech Edge. No other way to do it.... unless you spend tripple on hardware and then you just do the tuning yourself.
Trust me, 170 MPH at Daytona for 2 years running.....
You'll be good.
Chuck CoW
Late Mustangs have widebands built in from the factory and WOT tuning is much easier.
Sadly VETTES don't yet have wideband built in, so I modify my AutoCals to support the popular serial widebands like
innovate and tech Edge. No other way to do it.... unless you spend tripple on hardware and then you just do the tuning yourself.
Trust me, 170 MPH at Daytona for 2 years running.....
You'll be good.
Chuck CoW
You call or email customers back even after 10:00pm and then you're on here posting at 3:00am? WTH? You must really love your job (or you sleep during the middle of the day?)
I'm soon gonna do the PLX wideband install and send you another datalog so you can add PLX to the list of WB 02 sensors that you support.
Meanwhile, I gotta find me some drag radials, cause your latest tune made the runcraps totally useless!:
#16
Burning Brakes
Chuck,
Gotta get you out to the Phoenix area..love to have my GS with AR headers and cam retuned by you
Gotta get you out to the Phoenix area..love to have my GS with AR headers and cam retuned by you
Hey there Vito.
Just got your e-mail. No plans for Phoenix any time soon, and YES I can tune it remotely.
The ONLY way you'll get a car with a cam like that tuned right is with my AutoCal w/ serial wideband package.
There is no other way to do it remotely.
The AutoCal is specially modified at Corvettes of Westchester to make use of SERIAL WIDEBAND data from
an Innovate or Tech Edge wideband. While most NA tunes or bolt on cars will tune great without it,
when you're remote tuning a CAMMED or SUPERCHARGED vehicle this is the ONLY way to fly....
Just ask Matt from South Florida.... AutoCal, wideband, Chuck CoW Mail Tune on his HEAD/CAMMED C6 ZO6.
By what you told me in the e-mail I'm assuming you want your car to perform like the C6Z in the above video.
Chuck CoW
Just got your e-mail. No plans for Phoenix any time soon, and YES I can tune it remotely.
The ONLY way you'll get a car with a cam like that tuned right is with my AutoCal w/ serial wideband package.
There is no other way to do it remotely.
The AutoCal is specially modified at Corvettes of Westchester to make use of SERIAL WIDEBAND data from
an Innovate or Tech Edge wideband. While most NA tunes or bolt on cars will tune great without it,
when you're remote tuning a CAMMED or SUPERCHARGED vehicle this is the ONLY way to fly....
Just ask Matt from South Florida.... AutoCal, wideband, Chuck CoW Mail Tune on his HEAD/CAMMED C6 ZO6.
By what you told me in the e-mail I'm assuming you want your car to perform like the C6Z in the above video.
Chuck CoW