C6 Scan & Tune Onboard Diagnostics, Service Advice, Dyno Tuning, and Fuel Management for the Corvette
Sponsored by:
Sponsored by:

Aeroforce gauge install

Old 01-22-2016, 07:43 AM
  #1  
mtomlin1
Racer
Thread Starter
 
mtomlin1's Avatar
 
Member Since: Apr 2015
Posts: 356
Likes: 0
Received 17 Likes on 15 Posts
Default Aeroforce gauge install

Guys I'm trying install this into my z06 2006 model

does anyone here have experience of it ? Does it run off the obd or do you need to hard wire it in to the ignition live power supply.

Also mine seems to just flash red lights at the top and doesn't seem to read the data.

I plugged it into the OBD and it powered up but didn't turn off when I locked the car

Last edited by mtomlin1; 01-22-2016 at 07:44 AM.
Old 01-22-2016, 02:01 PM
  #2  
schpenxel
Race Director
 
schpenxel's Avatar
 
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes on 1,052 Posts
St. Jude Donor '15

Default

Have you read the instructions?

http://www.aeroforcetech.com/manuals.html
Old 01-25-2016, 07:53 PM
  #3  
mtomlin1
Racer
Thread Starter
 
mtomlin1's Avatar
 
Member Since: Apr 2015
Posts: 356
Likes: 0
Received 17 Likes on 15 Posts
Default

Yes I have turns out the company sent me the wrong model it only works on the c5 not c6
Old 02-13-2016, 02:57 PM
  #4  
KM177122
Pro
 
KM177122's Avatar
 
Member Since: Jan 2014
Location: Austin TX
Posts: 590
Received 37 Likes on 37 Posts
Default

Originally Posted by schpenxel
Have you read the instructions?

http://www.aeroforcetech.com/manuals.html
+1. Good info.

Get notified of new replies

To Aeroforce gauge install



Thread Tools
Search this Thread
Quick Reply: Aeroforce gauge install



All times are GMT -4. The time now is 03:04 AM.