Changed exhaust need torque specs!
#2
Team Owner
Stabilizer Shaft Insulator Clamp Bolt 65 N·m 49 lb ft
Stabilizer Shaft Insulator Clamp Nut 95 N·m 70 lb ft
Tom
PS: Here's my source - http://eliteengineeringusa.com/C6_Torque_Specs.pdf
Stabilizer Shaft Insulator Clamp Nut 95 N·m 70 lb ft
Tom
PS: Here's my source - http://eliteengineeringusa.com/C6_Torque_Specs.pdf
#3
Le Mans Master
And as an FYI for the rest.. from the C6 FAQ stickied in General:
for Automatic trans http://www.davidfarmerracing.com/C6-Torque-Auto.PDF
for manual trans http://www.davidfarmerracing.com/C6-Torque-Manual.PDF
for Automatic trans http://www.davidfarmerracing.com/C6-Torque-Auto.PDF
for manual trans http://www.davidfarmerracing.com/C6-Torque-Manual.PDF
#4
Race Director
Member Since: Aug 2005
Location: Hudson WI
Posts: 13,598
Received 181 Likes
on
162 Posts
NCM Sinkhole Donor
And as an FYI for the rest.. from the C6 FAQ stickied in General:
for Automatic trans http://www.davidfarmerracing.com/C6-Torque-Auto.PDF
for manual trans http://www.davidfarmerracing.com/C6-Torque-Manual.PDF
for Automatic trans http://www.davidfarmerracing.com/C6-Torque-Auto.PDF
for manual trans http://www.davidfarmerracing.com/C6-Torque-Manual.PDF
#6
Le Mans Master
Ya know, RIGHT after I posted that stuff I thought I'd better click the links to be sure... then I got busy. Thanks for the update and sorry about the bad links.