Flowtech Terminator exhaust
06-25-2007, 08:29 PM
#1
Intermediate
Thread Starter
Member Since: Jun 2007
Location: Freehold N.J. / Topsail N.C.
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Video of my Flowtech Terminator exhaust put on
Yea I got sick of trying to decide between borla b&b SLP systems ect for around 1,000$, so I decided since I am leaving in a month anyway and the car is gonna sit for 6 months to go with my idea of just putting in terminator mufflers...all cost me 200$ and it sounds great, not too loud, great tone, and little if any drone. Heres a video let me know what you think
http://www.youtube.com/watch?v=ColMENQG-jE
http://www.youtube.com/watch?v=ColMENQG-jE
Last edited by thaemcee2; 06-25-2007 at 08:38 PM.
06-26-2007, 09:48 AM
#2
Advanced
Member Since: Apr 2007
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
What size Muffler or Stock# for Flowtech?
I like the sound of the Flowtech Mufflers.
I have a 2007 Corvette 6 / A6 Coupe 1lt. What size mufflers or Stock#
are the mufflers you installed?
How easy is it to install these mufflers?
I have a 2007 Corvette 6 / A6 Coupe 1lt. What size mufflers or Stock#
are the mufflers you installed?
How easy is it to install these mufflers?
06-26-2007, 04:47 PM
#3
Intermediate
Thread Starter
Member Since: Jun 2007
Location: Freehold N.J. / Topsail N.C.
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I used the 50152 Theyre made for Mustang 5.0 liters...2.5inch offset inlet/outlet....
i didnt install them myself but the exhaust guy said it wasnt easy being that he did a "cut and paste" with the mufflers, meaning he cut out my stock ones and just welded these in...a very tight fit, but it worked and sounds great and was cheap
i didnt install them myself but the exhaust guy said it wasnt easy being that he did a "cut and paste" with the mufflers, meaning he cut out my stock ones and just welded these in...a very tight fit, but it worked and sounds great and was cheap
