blackbird345

They claim to be 28X11.5X17 anyone know if it will work with the C6? I have around 600 whp and looking for traction but don't have 18inch rims. I have MT ET Streets bias ply for the tract but want something to drive on the street with. Anyone know anything about these tires?

LS1LT1

Yes, they will fit as long as the wheel offset is correct, should work best on a 17x10 - 17x11 rim.

blackbird345

Why doesn't anyone use this as a way to get traction? Is it because you lose some handling?

blackbird345

Also, I have 17 inch rims that I was using with the MT ET Streets 26 inch, so I hope they will work for this tire as well....

gtodoug

I have these very same tires. I have them mounted on C5z06 fronts. The handling is terrible for the street. However, the tires downright hooks up. I have 530whp on motor and a little over 700 on the 200 shot.

At the track I haven't fully launched the car. It is easy to hook up with these tires with 3.90 gears. The one pass on nitrous I locked out first gear and pulled a 1.8 60' and the car went 11.1@136 spraying it through 3 gears. It feels really surefooted going down the track but the minute you let up on the gas going through the traps it feels very squirley in the rear. I just have to remember to keep straight and not to do any sudden braking to unload the rear of the car to avoid that squirley feeling. It almost feels like you are running a full slick.

No rubbing on the fender, but when I lowered the car it rubbed. At stock height, no rubbing.

I originally bought these so that I can go though the 1/4 in 4 gears instead of 5 chasing a 140mph trap speed.

Mine are for sale, only about 100 miles to the track and back. PM me for details.

dougie

blackbird345

Cool man. Any pics? What price? Why are you selling?