lowering corvette c6
#1
lowering corvette c6
Hello,
Can I use the rear lower bolt stock to lower a "3/4 inch.
If so, owe I turn in the meaning of the hand of the watch (left-right) or the opposite.
Michel
Can I use the rear lower bolt stock to lower a "3/4 inch.
If so, owe I turn in the meaning of the hand of the watch (left-right) or the opposite.
Michel
#3
Track Junky
I got about 5/8' out of my stock fronts but only 1/4' our of the rears. Had to take everything apart and trim the pad a bit to get 3/4 total travel.
Do a search and you'll find plenty of info. This website gives you an idea of what you would be up against if you trim the rears. I added a small dab of grease to prevent squeaking when I re-installed.
http://www.vetteweb.com/tech/vemp_07.../photo_01.html
Do a search and you'll find plenty of info. This website gives you an idea of what you would be up against if you trim the rears. I added a small dab of grease to prevent squeaking when I re-installed.
http://www.vetteweb.com/tech/vemp_07.../photo_01.html
#4
Racer
I got about 5/8' out of my stock fronts but only 1/4' our of the rears. Had to take everything apart and trim the pad a bit to get 3/4 total travel.
Do a search and you'll find plenty of info. This website gives you an idea of what you would be up against if you trim the rears. I added a small dab of grease to prevent squeaking when I re-installed.
http://www.vetteweb.com/tech/vemp_07.../photo_01.html
Do a search and you'll find plenty of info. This website gives you an idea of what you would be up against if you trim the rears. I added a small dab of grease to prevent squeaking when I re-installed.
http://www.vetteweb.com/tech/vemp_07.../photo_01.html