C6 Tech/Performance LS2, LS3, LS7, LS9 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

how much power does it take to beat a Z06

Thread Tools
 
Search this Thread
 
Old 02-03-2013, 11:50 PM
  #1  
Underratedneverfaded
Instructor
Thread Starter
 
Underratedneverfaded's Avatar
 
Member Since: Jun 2012
Location: Houston Texas
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default how much power does it take to beat a Z06

I have a base c6 with full exhaust, vararam cold air and a custom grind cam by pat G. I haven't had the chance to put it on the dyno but yesterday I ran a stock c6 Z and came out victorious. I know that a stock Z comes with around 450 to the wheel but it is also lighter than the base so is it safe to say I'm over 450?
Old 02-04-2013, 01:01 AM
  #2  
C6RaceCar
Burning Brakes
 
C6RaceCar's Avatar
 
Member Since: Sep 2012
Posts: 974
Likes: 0
Received 0 Likes on 0 Posts
Default

450-460 ish if you are manual. Auto will need more because of gearing.
Old 02-04-2013, 01:20 AM
  #3  
HOXXOH
Race Director
 
HOXXOH's Avatar
 
Member Since: Sep 2007
Location: Peoria/Phoenix AZ
Posts: 16,555
Received 2,060 Likes on 1,505 Posts
C6 of Year Finalist (performance mods) 2019

Default

If you are a M6 it's a driver's race. A good driver in a stock C6 will beat a poor driver in a Z06.

If you are an A6, a high stall converter may be all that's needed to beat the average Z06 driver. It can quickly come down to traction and who gets it best.

If you come up against a good Z06 driver, you're going to have a really tough time winning that one.
Old 02-04-2013, 02:11 AM
  #4  
Cliff Harris
Race Director
 
Cliff Harris's Avatar
 
Member Since: Apr 2002
Location: Anaheim CA
Posts: 10,036
Likes: 0
Received 341 Likes on 312 Posts

Default

It almost all depends on the driver. Reminds me of a story that took place in the '60s...

There was this guy named Steve who owned a '65 GTO. This car had major mods and he street raced it a lot and beat a lot of other cars. Another guy buys a '63 Chevy with a 409 and thinks he has a really hot car. Challenges the GTO for $100. GTO wins. "Best 2 out of 3"? Sure. GTO wins all three times. The best part: GTO and 409 drivers swap cars. Now the 409 (with the GTO driver) wins...
Old 02-04-2013, 12:44 PM
  #5  
C U IN REARVEIW
Le Mans Master
 
C U IN REARVEIW's Avatar
 
Member Since: Jan 2009
Location: ocean springs mississippi
Posts: 5,656
Received 109 Likes on 100 Posts

Default

I know the z06 is 300lbs lighter....so how much more hp do you need to make of for the weight differance?
Old 02-04-2013, 04:17 PM
  #6  
dennis50nj
Race Director
 
dennis50nj's Avatar
 
Member Since: Mar 2005
Location: Southampton NJ
Posts: 11,549
Received 25 Likes on 23 Posts

Default

Originally Posted by C U IN REARVEIW
I know the z06 is 300lbs lighter....so how much more hp do you need to make of for the weight differance?
30 hp
Old 02-05-2013, 08:50 AM
  #7  
Greg00Coupe
Race Director
 
Greg00Coupe's Avatar
 
Member Since: Aug 1999
Location: Bluffton SC via Canton Oh
Posts: 11,332
Received 1,974 Likes on 1,140 Posts

Default

Add an intake, headers, exhaust and custom tune. That will do it driver for driver.
Old 02-05-2013, 09:09 AM
  #8  
lebvette
Le Mans Master
 
lebvette's Avatar
 
Member Since: Oct 2001
Location: Pine Bluff Arkansas
Posts: 6,798
Received 24 Likes on 22 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-‘19-'20-'21


Default

Originally Posted by Greg00Coupe
Add an intake, headers, exhaust and custom tune. That will do it driver for driver.
Good luck with that......It will take, at least a cam. I can pull a LS3, at least 10 car lenths in a race. I don't think bolt-ons will make up the difference.
Old 02-05-2013, 10:26 AM
  #9  
Underratedneverfaded
Instructor
Thread Starter
 
Underratedneverfaded's Avatar
 
Member Since: Jun 2012
Location: Houston Texas
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by lebvette
Good luck with that......It will take, at least a cam. I can pull a LS3, at least 10 car lenths in a race. I don't think bolt-ons will make up the difference.
I know for sure boltons wont do the trick. I got beat like I was standing still with just full exhaust, and intake.
Old 02-05-2013, 10:39 AM
  #10  
EVL JAKE
Burning Brakes
 
EVL JAKE's Avatar
 
Member Since: Nov 2011
Location: West Dundee IL
Posts: 966
Received 158 Likes on 81 Posts
St. Jude Donor '12-'13

Default

I have 440 rwhp, an A6 and a 3600 stall. I have ran 2 Z06's and haven't been able to touch them on high end.
Old 02-05-2013, 10:58 AM
  #11  
teetheriot
Instructor
 
teetheriot's Avatar
 
Member Since: May 2010
Location: St Martinville Louisiana
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
Default

Its not always about how much hp, I think its more about your sixty foot. If the Z06 driver can get a good sixty foot you won't be able to keep up with him in a 1/4 mile run and forget anything further than that. With a good sixty foot you can run with most Z06s. I have run a few Z06s and they pull real hard on the top end of the 1/4 mile normally running near 130 mph to my 124. I run 11.teens with only bolt ons and converter with a tune and only lost to 1 Z06 in a race. I think I am at about 400 rwhp. I have over 100 passes and most Z06 drivers can't get a 1.55 sixty foot.

Last edited by teetheriot; 02-05-2013 at 11:01 AM.
Old 02-05-2013, 11:05 AM
  #12  
EVL JAKE
Burning Brakes
 
EVL JAKE's Avatar
 
Member Since: Nov 2011
Location: West Dundee IL
Posts: 966
Received 158 Likes on 81 Posts
St. Jude Donor '12-'13

Default

1/4 mile I can run with most Z06's, 1/2 mile and high way pulls is another story.
Old 02-05-2013, 11:40 AM
  #13  
dennis50nj
Race Director
 
dennis50nj's Avatar
 
Member Since: Mar 2005
Location: Southampton NJ
Posts: 11,549
Received 25 Likes on 23 Posts

Default

Originally Posted by lebvette
Good luck with that......It will take, at least a cam. I can pull a LS3, at least 10 car lenths in a race. I don't think bolt-ons will make up the difference.
Originally Posted by Underratedneverfaded
I know for sure boltons wont do the trick. I got beat like I was standing still with just full exhaust, and intake.

======================================== =====================================

Ranger

The C6 Z06 Fast List
Last Updated: February 1, 2013

==================
Bone-Stock on Stock Tires
==================
Rank~~ E.T.~~ Trap~ 60'~ Driver~~~~~ M.Yr. Details Thread Video
1~~~~ 10.981 128.90 1.77 Jamie Furman~ 2006 details~~ thread
2~~~~ 11.025 127.25 1.70 Ranger ~~~~~ 2006 details~~ thread video
3~~~~ 11.177 127.08 1.79 walterm32~~~ 2008 details~~ thread
4~~~~ 11.242 122.38 1.68 Dr.Ron ~~~~~ 2006 details~~ thread
5~~~~ 11.311 122.89 1.80 BLU-BY-U ~~~ 2006 details~~ thread
6~~~~ 11.349 124.97 1.75 zosix427 ~~~~ 2006 details~~
7~~~~ 11.392 124.84 1.92 C5 Frank ~~~~ 2006 details~~ thread
8~~~~ 11.429 124.88 1.86 dgdoc ~~~~~~ 2006 details~~ thread video
9~~~~ 11.443 125.93 1.95 O7zeeO6 ~~~~ 2007 details~~ thread
10 ~~~ 11.458 124.13 1.80 layjzay~~~~~~ 2006 details~~

11~~~ 11.488 123.86 1.80 Z06kait ~~~~~ 2007 details~~ thread
12~~~ 11.506 123.95 1.91 Burnin4~~~~~ 2006 details~~ ~~~~ video
13~~~ 11.512 124.39 1.85 forcefed281~~ 2009 details~~
14~~~ 11.545 123.16 1.83 dpracing ~~~~ 2007 details~~
15~~~ 11.554 124.13 1.86 jtfx ~~~~~~~~ 2007 details~~
16~~~ 11.557 126.68 1.95 Incon306 ~~~~ 2007 details~~
17~~~ 11.560 124.53 1.85 Zlicious ~~~~~ 2006 details~~ thread
18~~~ 11.592 125.94 1.95 Goatts ~~~~~~ 2009 details~~
19~~~ 11.607 122.99 1.87 Frozen~~~~~~ 2008 details~~
20~~~ 11.627 121.67 1.83 BLK BZT~~~~~ 2006 details~~

21~~~ 11.638 122.46 1.88 Chempwr~~~~ 2007 details~~
22~~~ 11.641 120.71 1.78 svt2z06 ~~~~~ 2008 details~~
23~~~ 11.682 127.70 2.05 Rusc6z06 ~~~~ 2008 details~~ thread video
24~~~ 11.687 121.41 1.97 linuxrepublican. 2008 details~~
25~~~ 11.695 122.44 1.93 vredvet~~~~~~ 2008 details~~
26~~~ 11.705 126.13 2.12 dpracing~~~~~ 2009 details~~ thread
27~~~ 11.709 121.78 2.06 Armalite~~~~~ 2011 details~~ thread
28~~~ 11.709 121.41 1.86 JWGJR ~~~~~~ 2007 details~~ thread
29~~~ 11.770 121.00 1.97 D-Rod~~~~~~~ 2006 details~~
30~~~ 11.821 123.75 2.11 USMCFRC ~~~~ 2008 details~~

31~~~ 11.839 125.31 2.08 AirBusPilot ~~~ 2009 details~~
32~~~ 11.859 117.86 1.82 '06QuicksilverZ06 2006 details~~ thread
33~~~ 11.876 119.43 1.99 saleentim ~~~~ 2009 details~~
34~~~ 11.946 122.49 2.02 Cyphear ~~~~~ 2007 details~~ ~~~~ video
35~~~ 11.982 122.52 2.10 CivEngineer~~~ 2006 details~~
36~~~ 11.991 122.52 1.96 cr133r ~~~~~~ 2006 details~~ thread video
37~~~ 13.020 114.39 2.39 liv2ryd ~~~~~~ 2010 details~~ ~~~~


========================
Bone-Stock except Non-Stock Tires
========================
Rank~~ E.T.~~ Trap~ 60'~ Driver~~~~~ M.Yr. Details Thread Video
1~~~~ 10.715 130.32 1.60 Ranger ~~~~~ 2006 details~~ thread video
2~~~~ 10.750 128.19 1.56 Dr.Ron ~~~~~ 2009 details~~ thread
3~~~~ 10.831 130.05 1.70 Jamie Furman~ 2006 details~~ thread
4~~~~ 10.892 128.62 1.61 propain ~~~~~ 2008 details~~ thread
5~~~~ 10.896 125.71 1.60 Steve Row ~~~ 2009 details~~ thread video
6~~~~ 10.898 128.84 1.60 Wndotintman ~ 2009 details~~
7~~~~ 10.912 126.32 1.62 Dr.Ron ~~~~~ 2006 details~~
8~~~~ 10.921 128.31 1.64 C5 Frank ~~~~ 2006 details~~ thread
9~~~~ 10.958 127.22 1.67 walterm32~~~ 2008 details~~ thread
10 ~~~ 11.096 126.73 1.76 Fartpipe~~~~~ 2008 details~~ thread video

11 ~~~ 11.139 128.68 1.80 dpracing ~~~~ 2009 details~~ thread video
12 ~~~ 11.222 125.61 1.79 Incon306~~~~ 2007 details~~
13 ~~~ 11.629 124.08 1.84 toroz06~~~~~ 2007 details~~
14 ~~~ 11.949 122.18 2.01 avacorvette ~~ 2006 details~~


stock and even with non stock tires i beat all that's on that
list with just bolt/ons and so did these guys.


External Engine Modifications LS2 (Bolt-Ons)
10.626 @ 126.98 - Dennis50NJ - 05 A4 Z51 - CAI, cb, conv, ewp, pfast, 3.73, hdr, ptb, tune, & more, DR - (3944)
10.788 @ 127.29 - LS1LT1 - 06 A6 - CAI, conv, fast, hdr, ptb, skinnies, tune, & more, DR - (5611)
10.936 @ 123.01 - Dicky - 06 A6 - CAI, conv, cutouts, fast, 3.42, hdr, & more tune, DR - (5485)
,
External Engine Modifications LS3 (Bolt-Ons)
10.820 @ 125.82 - HOXXOH - 08 A6 F55 - CAI, conv, ptb, Z06 Exhaust, tune, & more, DR - (4804)
10.888 @ 125.25 - 8850 - 08 A6 NPP 2.73 - CAI, conv, gto skinnies, hdr, udp, tune, DR - (6178)
Old 02-05-2013, 01:24 PM
  #14  
lebvette
Le Mans Master
 
lebvette's Avatar
 
Member Since: Oct 2001
Location: Pine Bluff Arkansas
Posts: 6,798
Received 24 Likes on 22 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-‘19-'20-'21


Default

Those are some nice running Vettes(non Z06) 99.9% of the guys are not going to see those type numbers.....just like I can't run with Ranger.

'Teether' mentioned the 60' times. Getting a Z out of hole with stock tires can be a real bitch.

Last edited by lebvette; 02-05-2013 at 01:32 PM.
Old 02-05-2013, 01:58 PM
  #15  
dennis50nj
Race Director
 
dennis50nj's Avatar
 
Member Since: Mar 2005
Location: Southampton NJ
Posts: 11,549
Received 25 Likes on 23 Posts

Default

Originally Posted by lebvette
Those are some nice running Vettes(non Z06) 99.9% of the guys are not going to see those type numbers.....just like I can't run with Ranger.

'Teether' mentioned the 60' times. Getting a Z out of hole with stock tires can be a real bitch.
I was told my bolt/on c6 would never run with the stock c6z, by many c6z owners, and i thank them for there opinion
Old 02-06-2013, 08:59 AM
  #16  
FrankTank
Race Director
 
FrankTank's Avatar
 
Member Since: Jun 2004
Location: Schaumburg IL
Posts: 18,739
Received 46 Likes on 35 Posts
CI 7-8-9-11 Veteran
St. Jude Donor '06-'10, '13

Default

Originally Posted by lebvette
Good luck with that......It will take, at least a cam. I can pull a LS3, at least 10 car lenths in a race. I don't think bolt-ons will make up the difference.
Originally Posted by Underratedneverfaded
I know for sure boltons wont do the trick. I got beat like I was standing still with just full exhaust, and intake.
Originally Posted by EVL JAKE
I have 440 rwhp, an A6 and a 3600 stall. I have ran 2 Z06's and haven't been able to touch them on high end.
An LS3 is going to need at minimum a healthy cam, tune, CAI, and the supporting mods to that.

Not only do you have to make up the difference between 436 HP vs 505HP, you have the 100-200 lb difference give or take between the Z and base C6.

Of course it's a "drivers race" what race is not You could put someone in a twin turbo GTR vs a C5, and if the GTR driver sucks, the C5 could probably even win that race.

If the drivers of both cars are even somewhat close the Z06 will win easily... it's just the pecking order of the models... Just like a ZR1 will walk away from the Z06 once you start getting into the triple digits.
Old 02-06-2013, 09:26 AM
  #17  
mowe
Drifting
 
mowe's Avatar
 
Member Since: Jan 2011
Location: Atlanta Ga
Posts: 1,442
Received 217 Likes on 108 Posts

Default

I have rolled with a few Z06's...3 to be exact.

2 stock ones and 1 w/ ex/int/tune

I made 440 whp and have an LS3 1LT w/LT, EX, INTK and TUNE...I do have Oz racing rims..which are a bit lighter then my factory ones.

I beat the 2 stock Z's by a fender or so....I lost to the bolt on Z by approx 2 cars...these runs were to about 130mph in a closed circuit area...all from a roll.

I can tell you that I fully expect to beat a bolt on Z when I get my cam next month..should be around 480-500whp....that extra 40-60 should be enough to make up what I lost to....

Just my experiences.

Get notified of new replies

To how much power does it take to beat a Z06

Old 02-06-2013, 09:56 AM
  #18  
C U IN REARVEIW
Le Mans Master
 
C U IN REARVEIW's Avatar
 
Member Since: Jan 2009
Location: ocean springs mississippi
Posts: 5,656
Received 109 Likes on 100 Posts

Default

Originally Posted by mowe
I have rolled with a few Z06's...3 to be exact.

2 stock ones and 1 w/ ex/int/tune

I made 440 whp and have an LS3 1LT w/LT, EX, INTK and TUNE...I do have Oz racing rims..which are a bit lighter then my factory ones.

I beat the 2 stock Z's by a fender or so....I lost to the bolt on Z by approx 2 cars...these runs were to about 130mph in a closed circuit area...all from a roll.

I can tell you that I fully expect to beat a bolt on Z when I get my cam next month..should be around 480-500whp....that extra 40-60 should be enough to make up what I lost to....

Just my experiences.
how do you like the OZ wheels (ultraleggaras)? how much lighter? noticable differance over oem?
Old 02-06-2013, 10:06 AM
  #19  
mowe
Drifting
 
mowe's Avatar
 
Member Since: Jan 2011
Location: Atlanta Ga
Posts: 1,442
Received 217 Likes on 108 Posts

Default

Originally Posted by C U IN REARVEIW
how do you like the OZ wheels (ultraleggaras)? how much lighter? noticable differance over oem?
So I like them...I honestly dont LOVE the look..but for the price I needed new tires so I just went all in with them. I cant feel a difference but they are lighter...when I was taking off my OEM wheel/tires...the front 19's stock felt heavier then the rear 20" Oz's....lol...at least thats what my arms told me !
Old 02-06-2013, 11:41 AM
  #20  
FrankTank
Race Director
 
FrankTank's Avatar
 
Member Since: Jun 2004
Location: Schaumburg IL
Posts: 18,739
Received 46 Likes on 35 Posts
CI 7-8-9-11 Veteran
St. Jude Donor '06-'10, '13

Default

Originally Posted by mowe
I have rolled with a few Z06's...3 to be exact.

2 stock ones and 1 w/ ex/int/tune

I made 440 whp and have an LS3 1LT w/LT, EX, INTK and TUNE...I do have Oz racing rims..which are a bit lighter then my factory ones.

I beat the 2 stock Z's by a fender or so....I lost to the bolt on Z by approx 2 cars...these runs were to about 130mph in a closed circuit area...all from a roll.

I can tell you that I fully expect to beat a bolt on Z when I get my cam next month..should be around 480-500whp....that extra 40-60 should be enough to make up what I lost to....

Just my experiences.
You must really be able to drive then, I have raced at least 3-4 LS3's with the same mods you have in my Z, and I beat all of them by at least a car length...and I consider myself to be just average driver

Most bolt on Z's are going to be easily at the 480-500RWHP range you plan on hittiing when you cam your car (by bolt on's I mean , headers, CAI and a tune, stock cam)

How much lighter are your wheels than the factory ones? Weight is a big deal, so smart that you went with lighter wheels to offset some of the weight between your car and the Z.


Quick Reply: how much power does it take to beat a Z06



All times are GMT -4. The time now is 05:10 AM.