Go Back   Corvette Forum > C6 Corvette, 2005 - 2013 > C6 Tech/Performance
Sign in using an external account
Register Forgot Password?
Register Search Today's Posts Mark Forums Read FAQ Vendor Directory
Search
C6 Tech/Performance
LS2, LS3, LS7, LS9 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace Sponsored by
21st Century Muscle Cars

Welcome to Corvetteforum.com!
Welcome to Corvetteforum.com.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!


Corvette Store
 
 
C7 Parts & Accessories
C6 Parts & Accessories
C5 Parts & Accessories
C4 Parts & Accessories
C3 Parts & Accessories
C2 Parts & Accessories
C1 Parts & Accessories
Wheels & Tires
Sponsored Ads
 
 
Vendor Directory
  
Reply
 
 
 
 
Thread Tools Search this Thread
Old 05-25-2013, 11:28 AM   #1
midela
Junior Member
 
Member Since: Oct 2009
Location: Victoria B.C.
Default Which ATI Harmonic Balancer is right for 2005 C6 LS2?

Hi Everyone!
Haven't posted here, for a few years.
Our 2005 C6 LS2 6-speed man. trans. has been relatively well-behaved, until now.
We need to order a Harmonic Balancer, and were told that ATI is the way to go.
We noticed that ATI has two offerings:
Part No. ATI-917246
and ATI-917266.
What is the difference between these two?
Also, the importance of the ARP Bolt?
which one to order?
Anyone done this?
Thanks so much Everyone!

Last edited by midela; 05-25-2013 at 11:29 AM. Reason: add more info
midela is offline   Reply With Quote
Old 05-25-2013, 12:15 PM   #2
Gering
Tolero Apto Victum
Support Corvetteforum!
 
Gering's Avatar
 
Member Since: Jul 2007
Location: The Woodlands TX
RWHP - 440.786 RWTQ - 439.494 I love to drive!!! 07 Vet Mileage = 177,968. http://togetherweserved.com/ http://www.coasttocoastam.com/ http://www.survivalistboards.com/
Default

OP: Check these out - http://store.katechengines.com/ati-s...ts-v-p230.aspx & http://store.katechengines.com/bille...sioner-p2.aspx & http://www.atiracing.com/products/da...s/damchevy.htm
& http://store.katechengines.com/dampers-c41.aspx

Also if you plan on doing a cam install, now would be a good time to do it so that you can save on labor cost.

Good luck with your repairs.
Gering is offline   Reply With Quote
Old 05-25-2013, 01:39 PM   #3
midela
Junior Member
 
Member Since: Oct 2009
Location: Victoria B.C.
Default

Hi There!
Thanks for the Info., passed it on to my Partner, and he's ordering the "917266" through Summit racing.
My other question is about the ARP BOLT? Something about a special "diamond encrusted" bolt?
Do you know anything about this?
Should I post it as a new thread?
We're a little in the dark about this.
Thanks!
midela is offline   Reply With Quote
Old 05-25-2013, 01:41 PM   #4
4498
Junior Member
 
Member Since: Jan 2012
Default

I called ATI, 917266 has an aluminium hub and they did not recommend it for a street car. Said 917246 was the way to go. That's from their tech dept.
4498 is offline   Reply With Quote
Old 05-25-2013, 02:04 PM   #5
Gering
Tolero Apto Victum
Support Corvetteforum!
 
Gering's Avatar
 
Member Since: Jul 2007
Location: The Woodlands TX
RWHP - 440.786 RWTQ - 439.494 I love to drive!!! 07 Vet Mileage = 177,968. http://togetherweserved.com/ http://www.coasttocoastam.com/ http://www.survivalistboards.com/
Default

I have read in MANY threads that it is a quality item. I do not remember which bolt the shop used when I had them change my OEM unit for an ATI unit. One thing that I can say is a new bolt would be ideal for two reasons: (1). It is a cheap item to replace during the install of the new unit "piece of mind". (2). This item is going to be torqued down to a specific spec setting, so I would use a "new bolt".
From what I have read, is that the OEM bolt can not be reused, were the APR bolt can. You can reuse the ARP bolt, but be sure to torque it to the ARP recommended torque, not the torque-to-yield value. Of coarse I would talk with the shop doing the work.

Check out this thread, it is for a C5, but still a good read - http://forums.corvetteforum.com/c5-t...em-or-arp.html & http://forums.corvetteforum.com/c6-t...-arp-bolt.html

Good Luck!
Gering is offline   Reply With Quote
Old 05-25-2013, 02:50 PM   #6
midela
Junior Member
 
Member Since: Oct 2009
Location: Victoria B.C.
Default

So, now we're REALLY confused about the two ATI Balancers!
Summit said to go with the aluminum one, and you say
that ATI says to go with the steel one?
There's a weight difference there of almost 4 lbs. as well.
I wonder why ATI would say that?
My partner will call ATI, but in the meantime, anybody have any opinions either way?
midela is offline   Reply With Quote
Old 05-25-2013, 02:54 PM   #7
LS1LT1
CF Senior Member
 
LS1LT1's Avatar
 
Member Since: Feb 2001
Location: Springfield, NJ Raceway Park & Atco Raceway
Send a message via AIM to LS1LT1
Default

Yeah it can be a little confusing as you also have to make sure that you choose the one that has the air conditioning pulley (sort of attaches to the back of the main balancer) with it as well (if you still have AC that is).
LS1LT1 is offline   Reply With Quote
Old 05-25-2013, 03:01 PM   #8
midela
Junior Member
 
Member Since: Oct 2009
Location: Victoria B.C.
Default

Both the 917266 & 917246 have the A/C pulley.
The only difference that I could read, is the metal composition, in that one is 100% steel, and the other is mixed alum./steel, with a weight difference.
That's why we're confused on the two opinions.
I guess HE will have to ask ATI, and re-question Summit, about their advice?
Do you know anything about which ARP bolt system to go with?
Anything about a "diamond-encrusted" bolt system?
Thanks!
midela is offline   Reply With Quote
Old 05-25-2013, 03:36 PM   #9
Gering
Tolero Apto Victum
Support Corvetteforum!
 
Gering's Avatar
 
Member Since: Jul 2007
Location: The Woodlands TX
RWHP - 440.786 RWTQ - 439.494 I love to drive!!! 07 Vet Mileage = 177,968. http://togetherweserved.com/ http://www.coasttocoastam.com/ http://www.survivalistboards.com/
Default

OP: Shoot this member a PM - http://forums.corvetteforum.com/memb...ech_jason.html Here is his website - http://store.katechengines.com/storefront.aspx They know their stuff.
Gering is offline   Reply With Quote
Old 05-27-2013, 12:53 PM   #10
irok
CF Senior Member
 
Member Since: May 2011
Location: OSHAWA ONTARIO
Default

Quote:
Originally Posted by midela View Post
Both the 917266 & 917246 have the A/C pulley.
The only difference that I could read, is the metal composition, in that one is 100% steel, and the other is mixed alum./steel, with a weight difference.
That's why we're confused on the two opinions.
I guess HE will have to ask ATI, and re-question Summit, about their advice?
Do you know anything about which ARP bolt system to go with?
Anything about a "diamond-encrusted" bolt system?
Thanks!
the ARP bolt is the way to go for ease of installation and the factory diamond embedded washer will not fit the ATI balancer.your original equipment 05 factory balancer was not machined to use the dew washer either.go with ATI'S recomendation on balancer choice

Last edited by irok; 05-27-2013 at 12:57 PM.
irok is offline   Reply With Quote
Old 06-07-2014, 08:13 PM   #11
Billyac
Junior Member
 
Member Since: Apr 2014
Default

What's a cam??
Billyac is offline   Reply With Quote
Old 06-07-2014, 09:26 PM   #12
tennblkc6
CF Senior Member
 
tennblkc6's Avatar
 
Member Since: Nov 2013
Location: Memphis Tn
Default

Quote:
Originally Posted by Billyac View Post
What's a cam??
uhoh
tennblkc6 is offline   Reply With Quote
Old 06-07-2014, 09:26 PM
 
Go Back   Corvette Forum > C6 Corvette, 2005 - 2013 > C6 Tech/Performance
Reload this Page Which ATI Harmonic Balancer is right for 2005 C6 LS2?
 
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Click for Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATI Harmonic Damper - 2006 Corvette Base Model 6.0L (1G1YY26U965123785) newfie709 C6 Corvette General Discussion 1 04-15-2014 06:08 PM
ATI Harmonic Balancer part number JKbride C6 Corvette General Discussion 5 03-31-2014 08:58 AM
WTB/ ATI HARMONIC BALANCER FOR 99 ls1 Frc ommyt68 C5 Parts for Sale/Wanted 2 09-24-2013 08:14 AM
corvette forum thank you c6 376 C6 Corvette General Discussion 31 02-25-2013 03:08 PM
LS2 Balancer Keywayed? KillSwitchNY C6 Tech/Performance 2 07-17-2012 03:46 PM


All times are GMT -4. The time now is 03:15 AM.


Emails & Password Backup