Ported Intake Manifolds and Throttle Bodies in Stock at Peak Speed Shop!
#1
Former Vendor
Thread Starter
Ported Intake Manifolds and Throttle Bodies in Stock at Peak Speed Shop!
Be up and running with a ported manifold and throttle body the same day! No more waiting 2 weeks with your vehicle down while getting your parts ported!
Peak Speed Shop has ported LS2, LS3, L76 and LS7 manifolds and throttle bodies in stock. Simply pay a refundable core charge until we receive your removed parts back.
Factory LS2 runner not ported (left). Runner precision ported by Peak Speed Shop (right)
Plenum with Basic Porting (at top). Plenum with Radical Porting (above -- all center posts removed)
Porting prices start at just $250 for Basic Porting and only $75 more to have your Throttle Body ported at the same time!
Refundable core charges are additional if you want us to ship one to you right away out of our stock.
TO ORDER, go to http://www.peakspeedshop.com/
Listen to what these customers have to say about the quality of our porting work....
"The car picks up so much nicer now, with the top end pulling harder then ever. I always felt that I would get a instant tq rush pressing the gas, and then the power kind of fell off a little. Now I get the same tq rush, and once I hit around 4500rpm, the car just wakes up! Big difference! Thank you again Bob for such a great job! I'm glad I had my manifold ported keeping my stock look! I would do it again in a heart beat!"
Kennan - GA (LS2 Intake Manifold Radical Porting)
"Both pieces came back looking great - just as advertised. The set up runs great and I can feel a difference in throttle response. I haven't really jumped on it yet as the weather up here has been lousy and I'm still on last years gas."
Ken - WA (LS3 Intake Manifold Radical Porting & Throttle Body ported)
“Just had mine done (radical porting) and the work was very good. I've got long tubes, ported throttle body and a CAI and will be getting tuned this week. Bump for a quality service.”
Mike - MO (LS7 Intake Manifold Radically ported)
Peak Speed Shop has ported LS2, LS3, L76 and LS7 manifolds and throttle bodies in stock. Simply pay a refundable core charge until we receive your removed parts back.
Factory LS2 runner not ported (left). Runner precision ported by Peak Speed Shop (right)
Plenum with Basic Porting (at top). Plenum with Radical Porting (above -- all center posts removed)
Porting prices start at just $250 for Basic Porting and only $75 more to have your Throttle Body ported at the same time!
Refundable core charges are additional if you want us to ship one to you right away out of our stock.
TO ORDER, go to http://www.peakspeedshop.com/
Listen to what these customers have to say about the quality of our porting work....
"The car picks up so much nicer now, with the top end pulling harder then ever. I always felt that I would get a instant tq rush pressing the gas, and then the power kind of fell off a little. Now I get the same tq rush, and once I hit around 4500rpm, the car just wakes up! Big difference! Thank you again Bob for such a great job! I'm glad I had my manifold ported keeping my stock look! I would do it again in a heart beat!"
Kennan - GA (LS2 Intake Manifold Radical Porting)
"Both pieces came back looking great - just as advertised. The set up runs great and I can feel a difference in throttle response. I haven't really jumped on it yet as the weather up here has been lousy and I'm still on last years gas."
Ken - WA (LS3 Intake Manifold Radical Porting & Throttle Body ported)
“Just had mine done (radical porting) and the work was very good. I've got long tubes, ported throttle body and a CAI and will be getting tuned this week. Bump for a quality service.”
Mike - MO (LS7 Intake Manifold Radically ported)
#2
Former Vendor
Thread Starter
Intake Manifold Removal Step by Step
Here is a link that gives step by step instructions for removing your intake manifold. Most weekend mechanics can do it in about two hours.
http://www.peakspeedshop.com/removal.xhtml
http://www.peakspeedshop.com/removal.xhtml
#3
Former Vendor
Thread Starter
Check out our Online Store!
Go to http://peakspeedshop.com/Zen_Cart/ to check out our new online store.
Order intake manifold porting, throttle body porting, FAST products plus intake parts.
Now, you no longer need to wait while you ship us your parts for porting. Pay a core charge to get the most common LS2, LS3 and LS7 parts from our inventory and be up and running the same day! Core charges are refundable once we receive your cores back. Order online at our new store!
For more information on Peak Speed Shop Services, go to our regular website at http://www.peakspeedshop.com/ . You can access our store from there, too.
Order intake manifold porting, throttle body porting, FAST products plus intake parts.
Now, you no longer need to wait while you ship us your parts for porting. Pay a core charge to get the most common LS2, LS3 and LS7 parts from our inventory and be up and running the same day! Core charges are refundable once we receive your cores back. Order online at our new store!
For more information on Peak Speed Shop Services, go to our regular website at http://www.peakspeedshop.com/ . You can access our store from there, too.
#4
Instructor
Called Peak Speed Shop today and talked to Bob. I ordered the radical ported LS2 intake manifold and the ported throttle body. I like that my car won't be down while waiting for my parts to return. Well...no down time except for installing the TB, IM, and new LT headers, x-pipe, and hi-flow cats that is!! Looking forward to doing this project!
#6
Former Vendor
Thread Starter
Peak Speed Shop porting process
Peak Speed Shop Porting Process
Some have asked about our porting process. Peak Speed Shop uses a three step process for porting intake manifolds and throttle bodies.
Go to our website at http://www.peakspeedshop.com/ for more information, or call us at 719-651-1952.
Some have asked about our porting process. Peak Speed Shop uses a three step process for porting intake manifolds and throttle bodies.
First, we use a steel crosscut bur for removing most of the material in key areas and to smooth transitions and ridges for better air flow.
Second, we us sanding rolls for smoothing out the area that had material removed by the crosscut bur.
Last, we using buffing pads to polish the work.
Unlike some businesses that do porting on the side, porting intake manifolds and throttle bodies is our primary business. We have earned a good reputation for quality work and service at competitive prices. Second, we us sanding rolls for smoothing out the area that had material removed by the crosscut bur.
Last, we using buffing pads to polish the work.
Go to our website at http://www.peakspeedshop.com/ for more information, or call us at 719-651-1952.
#8
Former Vendor
Thread Starter
Peak Speed Shop now offers Twin Turbo Kits
Great addition to your Peak Speed Shop ported intake!!!
Complete UPP Twin Turbo Kit for C5 and C6 Corvettes
STARTING AT JUST $5,850!!!
For more info, go to our thread:
http://forums.corvetteforum.com/c6-v...post1585520788
Complete UPP Twin Turbo Kit for C5 and C6 Corvettes
STARTING AT JUST $5,850!!!
For more info, go to our thread:
http://forums.corvetteforum.com/c6-v...post1585520788
#9
Former Vendor
Thread Starter
Peak Speed Shop Gift Certificates for Christmas!
Put a Peak Speed Shop Gift Certificate on your Christmas list!
Apply it towards porting your intake or throttle body. Or, apply it towards any of the products sold at our store:
To order gift certificates, go to http://peakspeedshop.com/Zen_Cart/in...products_id=47
Apply it towards porting your intake or throttle body. Or, apply it towards any of the products sold at our store:
- FAST manifolds
- FAST and Nick Williams throttle bodies
- Cold Air Intakes
- Billet style fuel rails
- Fuel Injectors
- Torrent fuel lines
- SLP and Lingenfelter Mass Air Flow sensors
- Twin Turbo Kits
- and more!
To order gift certificates, go to http://peakspeedshop.com/Zen_Cart/in...products_id=47
#10
First, do you port 102 fast intakes? I am trying to copy Livernois Motorsports stage three ls7 engine build. They say they port fast 102 intakes, but it cost 1K, plus the 1K for the intake. Do you know of anyone else that ports fast 102 intakes? Do you think your stock ls7 intake will come pretty close to the fast. Does anyone have any experience with this question? I would appreciate help in this matter.
#11
Former Vendor
Thread Starter
First, do you port 102 fast intakes? I am trying to copy Livernois Motorsports stage three ls7 engine build. They say they port fast 102 intakes, but it cost 1K, plus the 1K for the intake. Do you know of anyone else that ports fast 102 intakes? Do you think your stock ls7 intake will come pretty close to the fast. Does anyone have any experience with this question? I would appreciate help in this matter.
When we Radical Port a stock LS7 intake, it performs about the same and the unported FAST 102 intake. However, when we port the FAST 102 intake, we generally get an additional 8 rwhp out of it.
Here is a link to FAST 102 intake porting at our store:
http://peakspeedshop.com/Zen_Cart/in...roducts_id=226
Here is a link for buying a
FAST 102 intake for an LS7 at our store (porting is additional):
http://peakspeedshop.com/Zen_Cart/in...roducts_id=224
For the LS7, you will also need to switch out your fuel rails if you go with the FAST 102 intake. You can order those here:
http://peakspeedshop.com/Zen_Cart/in...index&cPath=67
#14
Former Vendor
Thread Starter
Radical 102 intake
Order your RADICAL 102 intake, now!
The best way to get your engine to breathe!
(LS3 intake shown)
Packages start as low as $445!
Packages also available with Drive by Wire and Drive by Cable Nick Williams 102mm throttle bodies.
Order at our online store at: http://peakspeedshop.com/Zen_Cart/in...Path=65_68_130
Or, call us at 719-651-1952.
The best way to get your engine to breathe!
(LS3 intake shown)
Packages start as low as $445!
Packages also available with Drive by Wire and Drive by Cable Nick Williams 102mm throttle bodies.
Order at our online store at: http://peakspeedshop.com/Zen_Cart/in...Path=65_68_130
Or, call us at 719-651-1952.
#16
Former Vendor
Thread Starter
Radical 102 LS7
Have a Radical 102 ported LS7 intake all ready to ship. Customer backed out. Call if you're interested in a little price break on this setup (with or without core exchange). 719-651-1952.
#17
Former Vendor
Thread Starter