NSTYC6

I've searched and searched but I can't seem to find the correct part numbers! Everyone says the part numbers on the slp site are way off? Can anyone tell me what belts they used? I see different belts being used in every thread I open. It's going on an 08 ls3 vette. Thanks guys

RyanR

Call scroggin-dickey https://sdparts.com/ and ask them. I just went through all the same exact mess your going through and can't remember what sizes I bought. I talked to 3 different people at SLP, none knew, and finally one guy told me, "we don't know and always refer customers to SD for the belt sizes." Strange I know but they'll hook you up with the sizes. GL

timd38

Mine came with instructions that showed a Dayco P/N 5060780 I did not have an issue using it.

Here is a link to the instructions.

http://static.summitracing.com/globa...ons/100225.pdf

tennblkc6

nice work...

NSTYC6

Thanks guys I just ordered a 78" gatorback belt, hopefully it does the trick.

stroked383z28

I have the powerbond 25% unit which is the same as the SLP. I used a 77.5" main belt and 40" AC belt. You should be ok being plus or minus a half inch though.