fast 102 install on a stock head/cam ls2?
#1
Melting Slicks
Thread Starter
fast 102 install on a stock head/cam ls2?
so...who has actually installed a fast 102 on a stock bottom end, stock head and cam ls2 engine and what were the gains or losses?
i want to know if installing this intake on such a combo will provide any gains such as low end torque, top end hp increases, shifting of the powerband ect.
thanks
i want to know if installing this intake on such a combo will provide any gains such as low end torque, top end hp increases, shifting of the powerband ect.
thanks
#2
Melting Slicks
Member Since: Jul 2008
Location: Oceanside Ca/ Tampa FL
Posts: 2,151
Likes: 0
Received 6 Likes
on
3 Posts
I installed my fast 102 on my cammed, stock bottom end LS2. I made 463 RWHP/ 423 RWTQ and love the fast intake. I just recently installed a VMAX ported throttle body last week and the throttle response is amazing compared to my stock throttle body. Jay
Last edited by 96mogt; 04-28-2014 at 08:03 PM. Reason: added Tq numbers
#3
Melting Slicks
Thread Starter
I gather most ppl that installs this intake also have installed a cam. I'm looking for replies from those that installed the fast on a stock long block with stock cam.
edit: search gave me the answers I was looking for...looks like its a go.
Last edited by tennblkc6; 04-28-2014 at 08:52 PM.
#4
Race Director
I originally had a FAST 90 installed many years ago with my blower. When the boost was increased the tuner didn't like it with no burst panels so it was removed. I've kicked myself ever since!
#6
Melting Slicks
Thread Starter
i did...if you need more clarification just do as i did and search "fast 102 intake install" and start reading. there are a ton of threads and you have to sift through the bs and compare the gains from the ppl that have actually installed this mod within the parameters i listed.
good luck!
good luck!