Switched 12V wire feeding Coils
#1
5th Gear
Thread Starter
Member Since: May 2014
Location: Fort Worth Texas
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Switched 12V wire feeding Coils
What I'm looking for is a diagram/schematic or even a picture that shows the 12V feed wire that branches out to all 8 of the ignition coils for a 2005 LS2 Corvette. I know on each of the coils it is the pink wire, but I'm looking for the 1 wire on the previous wiring harness that feeds into all 8 of them. I need to be able to tap into this wire so I am affecting all 8 of the coils switched 12V and nothing more.
Thanks
Thanks
Last edited by SuperBrowneye; 05-19-2014 at 02:50 AM.
#2
5th Gear
Thread Starter
Member Since: May 2014
Location: Fort Worth Texas
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
No one? Do all of the individual wires meet in the fuse panel possibly? I really don't want to have to tap into each one, but rather a source feeding all of them. Any help or ideas where I could find this information would help alot. Thanks.
#3
Melting Slicks
Send me an email and I'll reply with the schematics for you.
Each bank (1,3,5,7) and (2,4,6,8) has it's own pink wire. There are two fuses in the engine compartment for the coils. Bank 1 and bank 2.
Each bank (1,3,5,7) and (2,4,6,8) has it's own pink wire. There are two fuses in the engine compartment for the coils. Bank 1 and bank 2.
#4
5th Gear
Thread Starter
Member Since: May 2014
Location: Fort Worth Texas
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Awesome, that's what I thought and was hoping for - that they just came back to a fuse bank location where it would be easier to tap into. I just didn't want to have to tear into the wires to trace them to have to figure it out. Thanks email will be sent.
Last edited by SuperBrowneye; 06-08-2014 at 12:26 AM. Reason: edit text