HELP: Need a Performance Shop In AZ
#1
Racer
Thread Starter
HELP: Need a Performance Shop In AZ
I just moved to Prescott, AZ. I'm in need of a performance shop for my 2008 Vette. Looking to have some LT's installed and don't want just some"exhaust" shop to say yeah, NP and scratch up the coated headers, cross-thread the aluminum heads, etc. I may be also looking to get nitrous installed, but will also need a dyno tune as well, either way.
Somewhere up here near Prescott Valley would be great, but I'm willing to make the drive down to the Phoenix area for a quality shop!
Thank you!!
Somewhere up here near Prescott Valley would be great, but I'm willing to make the drive down to the Phoenix area for a quality shop!
Thank you!!
#6
Supporting Vendor
We primarily do vettes here at cpr. Give us a call and we can set you up!
Www.facebook.com/cordesperformanceracing
Joe@cordesperformanceracing.com
480-359-5914
We also are a vendor on the local vette forum ace.
Www.facebook.com/cordesperformanceracing
Joe@cordesperformanceracing.com
480-359-5914
We also are a vendor on the local vette forum ace.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
#8
Drifting
Member Since: Jan 2005
Location: Tucson Arizona
Posts: 1,827
Received 298 Likes
on
165 Posts
St. Jude Donor '08
Go to the Southwest forum here and you will get all the recommendations you can handle. I have dealt with three performance shops in Phoenix. The only one to do flawless work so far was Top Gear (replaced rear end). I have not dealt with Cordes.
Last edited by jim2092; 07-24-2014 at 01:52 PM.
#9
Supporting Vendor
Here is a recent pic of the shop showing that we are primarily Vette LSX based, we do work on vipers, cobra's, etc also, but our bread and butter is C5,6,7.
Jim2092 if Mario was your tech there at topgear just a heads up he is now part of our team here
Jim2092 if Mario was your tech there at topgear just a heads up he is now part of our team here