has anyone changed out the driver seat wire harness?
10-22-2014, 07:37 PM
#1
Racer
Thread Starter
Member Since: Feb 2005
Location: santa clarita ca
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
has anyone changed out the driver seat wire harness?
I've had a electrical gremlin in my driver seat for a while now. the seat moves forward on its own, incrementally, when cornering or moving in the seat.
i chalk it up to a short somewhere, so i am going to replace the wire harness. its a 3lt optioned car and wanted to know if the new harness consists of everything under the seat or is there another part i need to order.
i am also replacing the whole seat track assembly w/ the motors. i found a brand new one super cheap. both parts were around 200$. i'm hoping to fix this myself. electrical issues are a PIA!
i chalk it up to a short somewhere, so i am going to replace the wire harness. its a 3lt optioned car and wanted to know if the new harness consists of everything under the seat or is there another part i need to order.
i am also replacing the whole seat track assembly w/ the motors. i found a brand new one super cheap. both parts were around 200$. i'm hoping to fix this myself. electrical issues are a PIA!
10-22-2014, 08:09 PM
#2
Race Director
Member Since: Aug 2005
Location: Hudson WI
Posts: 13,598
Received 181 Likes
on
162 Posts
NCM Sinkhole Donor
It plugs into the floor and then goes to the seat. The plug on the floor is about 4 inches wide. Then the harness goes to each electrical component on the seat individually.
Last edited by timd38; 10-22-2014 at 08:30 PM.
