Diff mount specs
#1
Safety Car
Thread Starter
Diff mount specs
Hello - I don't have access to an '06+ diff mount and will be making some for a race car. If you any has/can get these measurements, I would appreciate it. Thanks.
Stud spacing (from center of stud to center of stud):
Stud length (and ideally how much excess sticks up from the bolt):
Length and width of mounting face:
Thickness (from face of the top mounting surface to the face of the bottom mounting surface):
Stud spacing (from center of stud to center of stud):
Stud length (and ideally how much excess sticks up from the bolt):
Length and width of mounting face:
Thickness (from face of the top mounting surface to the face of the bottom mounting surface):