New Product! Solid Engine & Trans Mounts
#1
Supporting Vendor
Thread Starter
New Product! Solid Engine & Trans Mounts
We're pleased to announce we just received our first batch of solid aluminum engine and transmission mounts for the C6 Corvette. Designed for cars in which noise, vibration, and harshness have long been forgotten, these mounts greatly improve stiffness over the fluid-filled factory mounts. These mounts are made from aircraft-grade aluminum with a mil-spec hard anodizing for a very durable finish. Studs are zinc-plated steel.
Lowered mounts will also be available to drop the entire drivetrain in the chassis to get the CG even lower on your track car or racecar. A 1/4" taller transmission mount will also be available to decrease drive axle angle on lowered cars, increasing CV life.
Engine Mounts- $189.99/pair: https://gspeed.com/product/c6-corvet...engine-mounts/
Transmission Mounts- $299/pair: https://gspeed.com/product/c6-corvet...ission-mounts/
Please feel free to contact us at sales@gspeed.com or 877-512-5180 with any questions.
__________________
"Keeping You on Track!"
http://www.gspeed.com
877-512-5180
Instagram_Facebook_YouTube
GSpeed C7Z Cooling Development
2014 NASA Texas TT1 Champion
2015 NASA Texas ST1 Champion
2018 NASA TTU & TT3 National Champions
2019 NASA ST2 National Champion
2019 NASA Texas TT2 Champion
2020 SCCA Majors COTA GT2 pole sitter
2020 SCCA Trans Am Road Atlanta SGT Winner
2022 NASA National Champion ST2
2023 NASA National Champion ST2
2023 NASA National Champion TT2
"Keeping You on Track!"
http://www.gspeed.com
877-512-5180
Instagram_Facebook_YouTube
GSpeed C7Z Cooling Development
2014 NASA Texas TT1 Champion
2015 NASA Texas ST1 Champion
2018 NASA TTU & TT3 National Champions
2019 NASA ST2 National Champion
2019 NASA Texas TT2 Champion
2020 SCCA Majors COTA GT2 pole sitter
2020 SCCA Trans Am Road Atlanta SGT Winner
2022 NASA National Champion ST2
2023 NASA National Champion ST2
2023 NASA National Champion TT2
Last edited by GSpeed; 07-28-2016 at 12:33 PM.