05 c6 to 2012 z06 drivetrain swap issue
09-24-2016, 02:37 PM
#1
Racer
Thread Starter
05 c6 to 2012 z06 drivetrain swap issue
I am currently in the process of swapping a 2012 z06 trans,diff, rear cradle and torque tube into my 05. The mating surface from the torqure tube to the bell housing appears to be about 3/4" short. I do not have the z06 bell housing and was planning to use the 05. is the 05 bell housing not the same depth as a 2012 z06 bell housing?
09-24-2016, 03:07 PM
#2
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
Pics?
09-26-2016, 10:36 AM
#4
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
Measure the torque tubes and see if they are the same length
09-27-2016, 08:52 PM
#5
Team Owner
GM shortened the TT in '09. Past "fixes" during swaps was to "slot" 2 of the rear cradle holes.
Review info here and in linked thread:
https://www.corvetteforum.com/forums...terchange.html
Review info here and in linked thread:
https://www.corvetteforum.com/forums...terchange.html
09-27-2016, 09:18 PM
#6
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
That's what I thought